The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Conductive Inks with a “Built-In” Mechanism That Enables Sintering at Room Temperature
Abstract
At present there is no metallic ink that enables formation of conductive patterns at room temperature by a single printing step. Printing conductive features by metallic nanoparticle-based inks must be followed by sintering while heating to elevated temperatures, thus preventing their utilization on most plastic substrates used in plastic electronics. In this report we present a new silver nanoparticle-based conductive ink, having a built-in sintering mechanism, which is triggered during drying of the printed pattern. The nanoparticles that are stabilized by a polymer undergo self-sintering spontaneously, due to the presence of a destabilizing agent, which comes into action only during drying of the printed pattern. The destabilizing agent, which contains Cl(-) ions, causes detachment of the anchoring groups of the stabilizer from the nanoparticles' surface and thus enables their coalescence and sintering. It was found that the new metallic ink leads to very high conductivities, by a single printing step: up to 41% of the conductivity of bulk silver was achieved, the highest reported conductivity of a printed pattern that is obtained from nanoparticles at room temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The path to ubiquitous and low-cost organic electronic appliances on plastic
Forrest, S. R. (2004) · Nature · doi:10.1038/nature02498 · Cited by 5,165
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Magdassi, S., Grouchko, M., Berezin, O., & Kamyshny, A. (2010) · ACS Nano · doi:10.1021/nn901868t · Cited by 509
Self-citationIn Situ FTIR-ATR Examination of Poly(acrylic acid) Adsorbed onto Hematite at Low pH
Kirwan, L. J., Fawell, P. D., & van Bronswijk, W. (2003) · Langmuir · doi:10.1021/la027012d · Cited by 290
Argon plasma sintering of inkjet printed silver tracks on polymer substrates
Reinhold, I., Hendriks, C. E., Eckardt, R., Kranenburg, J. M., Perelaer, J., Baumann, R. R., & Schubert, U. S. (2009) · Journal of Materials Chemistry · doi:10.1039/b823329b · Cited by 259
Controlled insulator-to-metal transformation in printable polymer composites with nanometal clusters
Sivaramakrishnan, S., Chia, P.-J., Yeo, Y.-C., Chua, L.-L., & Ho, P. K.-H. (2007) · Nature Materials · doi:10.1038/nmat1806 · Cited by 165
Anghel, D. F., Alderson, V., Winnik, F. M., Mizusaki, M., & Morishima, Y. (1998) · Polymer · doi:10.1016/s0032-3861(97)10126-4 · Cited by 93
Self-citation
Cited by
Roll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Huang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
Highly conductive and elastic nanomembrane for skin electronics
Jung, D., Lim, C., Shim, H. J., Kim, Y., Park, C., Jung, J., Han, S. I., Sunwoo, S.-H., Cho, K. W., Cha, G. D., et al. (2021) · Science · doi:10.1126/science.abh4357 · Cited by 403
Joining of Silver Nanomaterials at Low Temperatures: Processes, Properties, and Applications
Peng, P., Hu, A., Gerlich, A. P., Zou, G., Liu, L., & Zhou, Y. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02134 · Cited by 364
Metadata
- Authors
- Grouchko, M., Kamyshny, A., Mihailescu, C. F., Anghel, D. F., & Magdassi, S.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-04-05
- Volume
- 5
- Issue
- 4
- Pages
- 3354-3359
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2397151405
- Cited by
- 331
- References
- 8
- FWCI
- 12.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
