The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Graphene: Corrosion-Inhibiting Coating
Abstract
We report the use of atomically thin layers of graphene as a protective coating that inhibits corrosion of underlying metals. Here, we employ electrochemical methods to study the corrosion inhibition of copper and nickel by either growing graphene on these metals, or by mechanically transferring multilayer graphene onto them. Cyclic voltammetry measurements reveal that the graphene coating effectively suppresses metal oxidation and oxygen reduction. Electrochemical impedance spectroscopy measurements suggest that while graphene itself is not damaged, the metal under it is corroded at cracks in the graphene film. Finally, we use Tafel analysis to quantify the corrosion rates of samples with and without graphene coatings. These results indicate that copper films coated with graphene grown via chemical vapor deposition are corroded 7 times slower in an aerated Na(2)SO(4) solution as compared to the corrosion rate of bare copper. Tafel analysis reveals that nickel with a multilayer graphene film grown on it corrodes 20 times slower while nickel surfaces coated with four layers of mechanically transferred graphene corrode 4 times slower than bare nickel. These findings establish graphene as the thinnest known corrosion-protecting coating.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Raman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047
Electrochemical Methods: Fundamentals and Applications
de Rooij, D. M. R. (2003) · Anti-Corrosion Methods and Materials · doi:10.1108/acmm.2003.12850eae.001 · Cited by 13,009
Large-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils
Li, X., Cai, W., An, J., Kim, S., Nah, J., Yang, D., Piner, R., Velamakanni, A., Jung, I., Tutuc, E., et al. (2009) · Science · doi:10.1126/science.1171245 · Cited by 11,220
Large-scale pattern growth of graphene films for stretchable transparent electrodes
Kim, K. S., Zhao, Y., Jang, H., Lee, S. Y., Kim, J. M., Kim, K. S., Ahn, J.-H., Kim, P., Choi, J.-Y., & Hong, B. H. (2009) · Nature · doi:10.1038/nature07719 · Cited by 10,452
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
Impermeable Atomic Membranes from Graphene Sheets
Bunch, J. S., Verbridge, S. S., Alden, J. S., van der Zande, A. M., Parpia, J. M., Craighead, H. G., & McEuen, P. L. (2008) · Nano Letters · doi:10.1021/nl801457b · Cited by 2,919
Determination of effective capacitance and film thickness from constant-phase-element parameters
Hirschorn, B., Orazem, M. E., Tribollet, B., Vivier, V., Frateur, I., & Musiani, M. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2009.10.065 · Cited by 2,566
Principles and prevention of corrosion
Walker, R. (1993) · Materials & Design · doi:10.1016/0261-3069(93)90066-5 · Cited by 2,427
Measurement of the quantum capacitance of graphene
Xia, J., Chen, F., Li, J., & Tao, N. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2009.177 · Cited by 1,752
Oxidation Resistance of Graphene-Coated Cu and Cu/Ni Alloy
Chen, S., Brown, L., Levendorf, M., Cai, W., Ju, S.-Y., Edgeworth, J., Li, X., Magnuson, C. W., Velamakanni, A., Piner, R. D., et al. (2011) · ACS Nano · doi:10.1021/nn103028d · Cited by 1,374
Ultrastrong adhesion of graphene membranes
Koenig, S. P., Boddeti, N. G., Dunn, M. L., & Bunch, J. S. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.123 · Cited by 1,107
Graphene Oxidation: Thickness-Dependent Etching and Strong Chemical Doping
Liu, L., Ryu, S., Tomasik, M. R., Stolyarova, E., Jung, N., Hybertsen, M. S., Steigerwald, M. L., Brus, L. E., & Flynn, G. W. (2008) · Nano Letters · doi:10.1021/nl0808684 · Cited by 867
Amirudin, A., & Thieny, D. (1995) · Progress in Organic Coatings · doi:10.1016/0300-9440(95)00581-1 · Cited by 740
Tallman, D. E., Spinks, G., Dominis, A., & Wallace, G. G. (2002) · Journal of Solid State Electrochemistry · doi:10.1007/s100080100212 · Cited by 571
Effect of Chain Length on the Protection of Copper by n-Alkanethiols
Jennings, G. K., Munro, J. C., Yong, T., & Laibinis, P. E. (1998) · Langmuir · doi:10.1021/la980333y · Cited by 280
Self-citationCorrosion Science and Technology
Talbot, D. E. J., & Talbot, J. D. R. (2007) · CRC Press eBooks · doi:10.1201/b13606 · Cited by 85
Cited by
Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems
Ferrari, A. C., Bonaccorso, F., Fal'ko, V., Novoselov, K. S., Roche, S., Bøggild, P., Borini, S., Koppens, F. H. L., Palermo, V., Pugno, N., et al. (2015) · Nanoscale · doi:10.1039/c4nr01600a · Cited by 3,027
Environmental applications of graphene-based nanomaterials
Perreault, F., Fonseca de Faria, A., & Elimelech, M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00021a · Cited by 1,528
Electrochemistry of Graphene and Related Materials
Ambrosi, A., Chua, C. K., Bonanni, A., & Pumera, M. (2014) · Chemical Reviews · doi:10.1021/cr500023c · Cited by 1,208
Tjong, S. C. (2013) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2013.08.001 · Cited by 1,155
Deng, S., & Berry, V. (2016) · Materials Today · doi:10.1016/j.mattod.2015.10.002 · Cited by 1,034
Metadata
- Authors
- Prasai, D., Tuberquia, J. C., Harl, R. R., Jennings, G. K., & Bolotin, K. I.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-02-10
- Volume
- 6
- Issue
- 2
- Pages
- 1102-1108
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2052746811
- Cited by
- 1,291
- References
- 16
- FWCI
- 34.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.