The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Photothermally Reduced Graphene as High-Power Anodes for Lithium-Ion Batteries
Abstract
Conventional graphitic anodes in lithium-ion batteries cannot provide high-power densities due to slow diffusivity of lithium ions in the bulk electrode material. Here we report photoflash and laser-reduced free-standing graphene paper as high-rate capable anodes for lithium-ion batteries. Photothermal reduction of graphene oxide yields an expanded structure with micrometer-scale pores, cracks, and intersheet voids. This open-pore structure enables access to the underlying sheets of graphene for lithium ions and facilitates efficient intercalation kinetics even at ultrafast charge/discharge rates of >100 C. Importantly, photothermally reduced graphene anodes are structurally robust and display outstanding stability and cycling ability. At charge/discharge rates of ~40 C, photoreduced graphene anodes delivered a steady capacity of ~156 mAh/g(anode) continuously over 1000 charge/discharge cycles, providing a stable power density of ~10 kW/kg(anode). Such electrodes are envisioned to be mass scalable with relatively simple and low-cost fabrication procedures, thereby providing a clear pathway toward commercialization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Chemical methods for the production of graphenes
Park, S., & Ruoff, R. S. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2009.58 · Cited by 6,663
Preparation and characterization of graphene oxide paper
Dikin, D. A., Stankovich, S., Zimney, E. J., Piner, R. D., Dommett, G. H. B., Evmenenko, G., Nguyen, S. T., & Ruoff, R. S. (2007) · Nature · doi:10.1038/nature06016 · Cited by 5,594
Laser Scribing of High-Performance and Flexible Graphene-Based Electrochemical Capacitors
El-Kady, M. F., Strong, V., Dubin, S., & Kaner, R. B. (2012) · Science · doi:10.1126/science.1216744 · Cited by 4,008
Single Sheet Functionalized Graphene by Oxidation and Thermal Expansion of Graphite
McAllister, M. J., Li, J.-L., Adamson, D. H., Schniepp, H. C., Abdala, A. A., Liu, J., Herrera-Alonso, M., Milius, D. L., Car, R., Prud'homme, R. K., et al. (2007) · Chemistry of Materials · doi:10.1021/cm0630800 · Cited by 3,569
Battery materials for ultrafast charging and discharging
Kang, B., & Ceder, G. (2009) · Nature · doi:10.1038/nature07853 · Cited by 3,480
Functionalized Single Graphene Sheets Derived from Splitting Graphite Oxide
Schniepp, H. C., Li, J.-L., McAllister, M. J., Sai, H., Herrera-Alonso, M., Adamson, D. H., Prud'homme, R. K., Car, R., Saville, D. A., & Aksay, I. A. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp060936f · Cited by 3,476
Yoo, E., Kim, J., Hosono, E., Zhou, H.-S., Kudo, T., & Honma, I. (2008) · Nano Letters · doi:10.1021/nl800957b · Cited by 2,921
Cited by
Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems
Ferrari, A. C., Bonaccorso, F., Fal'ko, V., Novoselov, K. S., Roche, S., Bøggild, P., Borini, S., Koppens, F. H. L., Palermo, V., Pugno, N., et al. (2015) · Nanoscale · doi:10.1039/c4nr01600a · Cited by 3,027
Progress in flexible lithium batteries and future prospects
Zhou, G., Li, F., & Cheng, H.-M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43182g · Cited by 1,498
Graphene for batteries, supercapacitors and beyond
El-Kady, M. F., Shao, Y., & Kaner, R. B. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.33 · Cited by 1,262
Electrochemistry of Graphene and Related Materials
Ambrosi, A., Chua, C. K., Bonanni, A., & Pumera, M. (2014) · Chemical Reviews · doi:10.1021/cr500023c · Cited by 1,208
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn502045y · Cited by 907
Fibrous Hybrid of Graphene and Sulfur Nanocrystals for High-Performance Lithium–Sulfur Batteries
Zhou, G., Yin, L.-C., Wang, D.-W., Li, L., Pei, S., Gentle, I. R., Li, F., & Cheng, H.-M. (2013) · ACS Nano · doi:10.1021/nn401228t · Cited by 761
Kumar, R., Sahoo, S., Joanni, E., Singh, R. K., Tan, W. K., Kar, K. K., & Matsuda, A. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100786 · Cited by 554
Defect-induced plating of lithium metal within porous graphene networks
Mukherjee, R., Thomas, A. V., Datta, D., Singh, E., Li, J., Eksik, O., Shenoy, V. B., & Koratkar, N. (2014) · Nature Communications · doi:10.1038/ncomms4710 · Cited by 436
Self-citationGraphene-based materials for electrochemical energy storage devices: Opportunities and challenges
Lv, W., Li, Z., Deng, Y., Yang, Q.-H., & Kang, F. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.10.002 · Cited by 433
Recent Advances in Carbon‐Based Electrodes for Energy Storage and Conversion
Kothandam, G., Singh, G., Guan, X., Lee, J. M., Ramadass, K., Joseph, S., Benzigar, M., Karakoti, A., Yi, J., Kumar, P., et al. (2023) · Advanced Science · doi:10.1002/advs.202301045 · Cited by 424
Tian, Y., Cao, Y., Wang, Y., Yang, W., & Feng, J. (2013) · Advanced Materials · doi:10.1002/adma.201300118 · Cited by 390
Graphene‐Based Nanocomposites for Energy Storage
Ji, L., Meduri, P., Agubra, V., Xiao, X., & Alcoutlabi, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502159 · Cited by 385
Flexible graphene devices related to energy conversion and storage
Wang, X., & Shi, G. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03685a · Cited by 373
Carbon science in 2016: Status, challenges and perspectives
Zhang, J., Terrones, M., Park, C. R., Mukherjee, R., Monthioux, M., Koratkar, N., Kim, Y. S., Hurt, R., Frackowiak, E., Enoki, T., et al. (2016) · Carbon · doi:10.1016/j.carbon.2015.11.060 · Cited by 351
Self-citationDesign Considerations for Unconventional Electrochemical Energy Storage Architectures
Vlad, A., Singh, N., Galande, C., & Ajayan, P. M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402115 · Cited by 346
Graphene‐Encapsulated Si on Ultrathin‐Graphite Foam as Anode for High Capacity Lithium‐Ion Batteries
Ji, J., Ji, H., Zhang, L. L., Zhao, X., Bai, X., Fan, X., Zhang, F., & Ruoff, R. S. (2013) · Advanced Materials · doi:10.1002/adma.201301530 · Cited by 338
Photoreduction of Graphene Oxides: Methods, Properties, and Applications
Zhang, Y., Guo, L., Xia, H., Chen, Q., Feng, J., & Sun, H. (2014) · Advanced Optical Materials · doi:10.1002/adom.201300317 · Cited by 307
3D Graphene‐Based H2‐Production Photocatalyst and Electrocatalyst
Kuang, P., Sayed, M., Fan, J., Cheng, B., & Yu, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903802 · Cited by 302
Wearable energy sources based on 2D materials
Yi, F., Ren, H., Shan, J., Sun, X., Wei, D., & Liu, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00849j · Cited by 285
Chen, Y., Song, B., Tang, X., Lu, L., & Xue, J. (2014) · Small · doi:10.1002/smll.201302879 · Cited by 271
A Bottom‐Up Approach to Build 3D Architectures from Nanosheets for Superior Lithium Storage
Gong, Y., Yang, S., Zhan, L., Ma, L., Vajtai, R., & Ajayan, P. M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201300844 · Cited by 258
Graphene and its composites with nanoparticles for electrochemical energy applications
Li, Q., Mahmood, N., Zhu, J., Hou, Y., & Sun, S. (2014) · Nano Today · doi:10.1016/j.nantod.2014.09.002 · Cited by 256
Metadata
- Authors
- Mukherjee, R., Thomas, A. V., Krishnamurthy, A., & Koratkar, N.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-08-16
- Volume
- 6
- Issue
- 9
- Pages
- 7867-7878
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2072624389
- Cited by
- 340
- References
- 33
- FWCI
- 27.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.