ZnO1–x Nanorod Arrays/ZnO Thin Film Bilayer Structure: From Homojunction Diode and High-Performance Memristor to Complementary 1D1R Application
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
We present a ZnO(1-x) nanorod array (NR)/ZnO thin film (TF) bilayer structure synthesized at a low temperature, exhibiting a uniquely rectifying characteristic as a homojunction diode and a resistive switching behavior as memory at different biases. The homojunction diode is due to asymmetric Schottky barriers at interfaces of the Pt/ZnO NRs and the ZnO TF/Pt, respectively. The ZnO(1-x) NRs/ZnO TF bilayer structure also shows an excellent resistive switching behavior, including a reduced operation power and enhanced performances resulting from supplements of confined oxygen vacancies by the ZnO(1-x) NRs for rupture and recovery of conducting filaments inside the ZnO TF layer. A hydrophobic behavior with a contact angle of ~125° can be found on the ZnO(1-x) NRs/ZnO TF bilayer structure, demonstrating a self-cleaning effect. Finally, a successful demonstration of complementary 1D1R configurations can be achieved by simply connecting two identical devices back to back in series, realizing the possibility of a low-temperature all-ZnO-based memory system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Memristive switching mechanism for metal/oxide/metal nanodevices
Yang, J. J., Pickett, M. D., Li, X., Ohlberg, D. A. A., Stewart, D. R., & Williams, R. S. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.160 · Cited by 2,987
Lee, M.-J., Lee, C. B., Lee, D., Lee, S. R., Chang, M., Hur, J. H., Kim, Y.-B., Kim, C.-J., Seo, D. H., Seo, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3070 · Cited by 2,228
Yang, Y. C., Pan, F., Liu, Q., Liu, M., & Zeng, F. (2009) · Nano Letters · doi:10.1021/nl900006g · Cited by 876
Cited by
A comprehensive review on emerging artificial neuromorphic devices
Zhu, J., Zhang, T., Yang, Y., & Huang, R. (2020) · Applied Physics Reviews · doi:10.1063/1.5118217 · Cited by 758
Resistive switching phenomena: A review of statistical physics approaches
Lee, J. S., Lee, S., & Noh, T. W. (2015) · Applied Physics Reviews · doi:10.1063/1.4929512 · Cited by 463
Dynamic Evolution of Conducting Nanofilament in Resistive Switching Memories
Chen, J.-Y., Hsin, C.-L., Huang, C.-W., Chiu, C.-H., Huang, Y.-T., Lin, S.-J., Wu, W.-W., & Chen, L.-J. (2013) · Nano Letters · doi:10.1021/nl4015638 · Cited by 388
Self-citationStatus and prospects of ZnO-based resistive switching memory devices
Simanjuntak, F. M., Panda, D., Wei, K.-H., & Tseng, T.-Y. (2016) · Nanoscale Research Letters · doi:10.1186/s11671-016-1570-y · Cited by 244
Gül, F. (2019) · Results in Physics · doi:10.1016/j.rinp.2018.12.092 · Cited by 127
Chiolerio, A., Roppolo, I., Bejtka, K., Asvarov, A., & Pirri, C. F. (2016) · RSC Advances · doi:10.1039/c6ra10503c · Cited by 57
Emulator Circuits and Resistive Switching Parameters of Memristor
Yesil, A., Gül, F., & Babacan, Y. (2018) · Memristor and Memristive Neural Networks · doi:10.5772/intechopen.71903 · Cited by 10
“In one diode-one resistor (1D1R)type memory cell memristor device, one of the electrodes must be a Schottky contact [17].”
Metadata
- Authors
- Huang, C.-H., Huang, J.-S., Lin, S.-M., Chang, W.-Y., He, J.-H., & Chueh, Y.-L.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-09-06
- Volume
- 6
- Issue
- 9
- Pages
- 8407-8414
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2331880520
- Cited by
- 151
- References
- 6
- FWCI
- 6.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.