The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Formation of the Spinel Phase in the Layered Composite Cathode Used in Li-Ion Batteries
Abstract
Pristine Li-rich layered cathodes, such as Li(1.2)Ni(0.2)Mn(0.6)O(2) and Li(1.2)Ni(0.1)Mn(0.525)Co(0.175)O(2), were identified to exist in two different structures: LiMO(2)R3[overline]m and Li(2)MO(3)C2/m phases. Upon 300 cycles of charge/discharge, both phases gradually transform to the spinel structure. The transition from LiMO(2)R3[overline]m to spinel is accomplished through the migration of transition metal ions to the Li site without breaking down the lattice, leading to the formation of mosaic structured spinel grains within the parent particle. In contrast, transition from Li(2)MO(3)C2/m to spinel involves removal of Li(+) and O(2-), which produces large lattice strain and leads to the breakdown of the parent lattice. The newly formed spinel grains show random orientation within the same particle. Cracks and pores were also noticed within some layered nanoparticles after cycling, which is believed to be the consequence of the lattice breakdown and vacancy condensation upon removal of lithium ions. The AlF(3)-coating can partially relieve the spinel formation in the layered structure during cycling, resulting in a slower capacity decay. However, the AlF(3)-coating on the layered structure cannot ultimately stop the spinel formation. The observation of structure transition characteristics discussed in this paper provides direct explanation for the observed gradual capacity loss and poor rate performance of the layered composite. It also provides clues about how to improve the materials structure in order to improve electrochemical performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Self-citationSynthesis of layered LiMnO2 as an electrode for rechargeable lithium batteries
Armstrong, A. R., & Bruce, P. G. (1996) · Nature · doi:10.1038/381499a0 · Cited by 1,438
Lu, Z., & Dahn, J. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1480014 · Cited by 1,016
Lu, Z., Beaulieu, L. Y., Donaberger, R. A., Thomas, C. L., & Dahn, J. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1471541 · Cited by 906
Identification of cathode materials for lithium batteries guided by first-principles calculations
Ceder, G., Chiang, Y.-M., Sadoway, D. R., Aydinol, M. K., Jang, Y.-I., & Huang, B. (1998) · Nature · doi:10.1038/33647 · Cited by 841
Xu, B., Fell, C. R., Chi, M., & Meng, Y. S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01131f · Cited by 825
Chiang, Y.-M. (2010) · Science · doi:10.1126/science.1198591 · Cited by 504
Gu, M., Li, Y., Li, X., Hu, S., Zhang, X., Xu, W., Thevuthasan, S., Baer, D. R., Zhang, J.-G., Liu, J., et al. (2012) · ACS Nano · doi:10.1021/nn303312m · Cited by 361
Self-citationZheng, J. M., Zhang, Z. R., Wu, X. B., Dong, Z. X., Zhu, Z., & Yang, Y. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2966694 · Cited by 295
Self-citation
Cited by
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Lithium-ion batteries: outlook on present, future, and hybridized technologies
Kim, T., Song, W., Son, D.-Y., Ono, L. K., & Qi, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10513h · Cited by 2,479
Reversible anionic redox chemistry in high-capacity layered-oxide electrodes
Sathiya, M., Rousse, G., Ramesha, K., Laisa, C. P., Vezin, H., Sougrati, M. T., Doublet, M.-L., Foix, D., Gonbeau, D., Walker, W., et al. (2013) · Nature Materials · doi:10.1038/nmat3699 · Cited by 1,539
Lin, F., Markus, I. M., Nordlund, D., Weng, T.-C., Asta, M. D., Xin, H. L., & Doeff, M. M. (2014) · Nature Communications · doi:10.1038/ncomms4529 · Cited by 1,481
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Yan, P., Zheng, J., Gu, M., Xiao, J., Zhang, J.-G., & Wang, C.-M. (2017) · Nature Communications · doi:10.1038/ncomms14101 · Cited by 1,010
Self-citationHigh-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Self-citationOrigin of voltage decay in high-capacity layered oxide electrodes
Sathiya, M., Abakumov, A. M., Foix, D., Rousse, G., Ramesha, K., Saubanère, M., Doublet, M. L., Vezin, H., Laisa, C. P., Prakash, A. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4137 · Cited by 922
Graphene aerogels for efficient energy storage and conversion
Mao, J., Iocozzia, J., Huang, J., Meng, K., Lai, Y., & Lin, Z. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03031b · Cited by 868
He, W., Guo, W., Wu, H., Lin, L., Liu, Q., Han, X., Xie, Q., Liu, P., Zheng, H., Wang, L., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005937 · Cited by 626
Self-citationEum, D., Kim, B., Kim, S. J., Park, H., Wu, J., Cho, S.-P., Yoon, G., Lee, M. H., Jung, S.-K., Yang, W., et al. (2020) · Nature Materials · doi:10.1038/s41563-019-0572-4 · Cited by 590
Lin, F., Liu, Y., Yu, X., Cheng, L., Singer, A., Shpyrko, O. G., Xin, H. L., Tamura, N., Tian, C., Weng, T.-C., et al. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00007 · Cited by 582
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
Clément, R. J., Lun, Z., & Ceder, G. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02803j · Cited by 560
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Self-citationKim, H., Kim, M. G., Jeong, H. Y., Nam, H., & Cho, J. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00045 · Cited by 526
Study of the Failure Mechanisms of LiNi0.8Mn0.1Co0.1O2Cathode Material for Lithium Ion Batteries
Li, J., Downie, L. E., Ma, L., Qiu, W., & Dahn, J. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1011507jes · Cited by 516
Li‐ and Mn‐Rich Cathode Materials: Challenges to Commercialization
Zheng, J., Myeong, S., Cho, W., Yan, P., Xiao, J., Wang, C., Cho, J., & Zhang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601284 · Cited by 513
Self-citationSodium transition metal oxides: the preferred cathode choice for future sodium-ion batteries?
Liu, Q., Hu, Z., Li, W., Zou, C., Jin, H., Wang, S., Chou, S., & Dou, S.-X. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02997a · Cited by 468
Boulineau, A., Simonin, L., Colin, J.-F., Bourbon, C., & Patoux, S. (2013) · Nano Letters · doi:10.1021/nl4019275 · Cited by 467
Yabuuchi, N., Hara, R., Kajiyama, M., Kubota, K., Ishigaki, T., Hoshikawa, A., & Komaba, S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301453 · Cited by 432
Zuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
Sathiya, M., Ramesha, K., Rousse, G., Foix, D., Gonbeau, D., Prakash, A. S., Doublet, M. L., Hemalatha, K., & Tarascon, J.-M. (2013) · Chemistry of Materials · doi:10.1021/cm400193m · Cited by 405
Structural and Chemical Evolution of Li- and Mn-Rich Layered Cathode Material
Zheng, J., Xu, P., Gu, M., Xiao, J., Browning, N. D., Yan, P., Wang, C., & Zhang, J.-G. (2015) · Chemistry of Materials · doi:10.1021/cm5045978 · Cited by 405
Self-citationMaleki Kheimeh Sari, H., & Li, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901597 · Cited by 403
Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries
Huang, Y., Dong, Y., Li, S., Lee, J., Wang, C., Zhu, Z., Xue, W., Li, Y., & Li, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000997 · Cited by 374
Self-citationLiu, J., Wang, J., Ni, Y., Zhang, K., Cheng, F., & Chen, J. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.028 · Cited by 349
Self-citationLi, B., Yan, H., Ma, J., Yu, P., Xia, D., Huang, W., Chu, W., & Wu, Z. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400436 · Cited by 347
Hy, S., Liu, H., Zhang, M., Qian, D., Hwang, B.-J., & Meng, Y. S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03573b · Cited by 347
Anionic Redox in Rechargeable Lithium Batteries
Li, B., & Xia, D. (2017) · Advanced Materials · doi:10.1002/adma.201701054 · Cited by 338
Zhao, S., Guo, Z., Yan, K., Wan, S., He, F., Sun, B., & Wang, G. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.008 · Cited by 325
Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Wang, J., He, X., Paillard, E., Laszczynski, N., Li, J., & Passerini, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600906 · Cited by 309
Advanced Electrode Materials in Lithium Batteries: Retrospect and Prospect
Shen, X., Zhang, X.-Q., Ding, F., Huang, J.-Q., Xu, R., Chen, X., Yan, C., Su, F.-Y., Chen, C.-M., Liu, X., et al. (2021) · Energy Material Advances · doi:10.34133/2021/1205324 · Cited by 306
Rechargeable lithium batteries and beyond: Progress, challenges, and future directions
Amine, K., Kanno, R., & Tzeng, Y. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.62 · Cited by 262
Self-citationRoadmap for a sustainable circular economy in lithium-ion and future battery technologies
Harper, G. D. J., Kendrick, E., Anderson, P. A., Mrozik, W., Christensen, P., Lambert, S., Greenwood, D., Das, P. K., Ahmeid, M., Milojevic, Z., et al. (2023) · Journal of Physics: Energy · doi:10.1088/2515-7655/acaa57 · Cited by 137
Self-citationLuo, G., Li, X., Chen, L., Chao, Y., & Zhu, W. (2023) · Desalination · doi:10.1016/j.desal.2022.116228 · Cited by 69
Metadata
- Authors
- Gu, M., Belharouak, I., Zheng, J., Wu, H., Xiao, J., Genc, A., Amine, K., Thevuthasan, S., Baer, D. R., Zhang, J.-G., Browning, N. D., Liu, J., & Wang, C.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-12-18
- Volume
- 7
- Issue
- 1
- Pages
- 760-767
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2022822173
- Cited by
- 918
- References
- 15
- FWCI
- 41.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.