The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Low-Temperature Solution-Processed Perovskite Solar Cells with High Efficiency and Flexibility
Abstract
Perovskite compounds have attracted recently great attention in photovoltaic research. The devices are typically fabricated using condensed or mesoporous TiO2 as the electron transport layer and 2,2'7,7'-tetrakis-(N,N-dip-methoxyphenylamine)9,9'-spirobifluorene as the hole transport layer. However, the high-temperature processing (450 °C) requirement of the TiO2 layer could hinder the widespread adoption of the technology. In this report, we adopted a low-temperature processing technique to attain high-efficiency devices in both rigid and flexible substrates, using device structure substrate/ITO/PEDOT:PSS/CH(3)NH(3)PbI(3-x)Cl(x)/PCBM/Al, where PEDOT:PSS and PCBM are used as hole and electron transport layers, respectively. Mixed halide perovskite, CH(3)NH(3)PbI(3-x)Cl(x), was used due to its long carrier lifetime and good electrical properties. All of these layers are solution-processed under 120 °C. Based on the proposed device structure, power conversion efficiency (PCE) of 11.5% is obtained in rigid substrates (glass/ITO), and a 9.2% PCE is achieved for a polyethylene terephthalate/ITO flexible substrate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Plasmonics for improved photovoltaic devices
Atwater, H. A., & Polman, A. (2010) · Nature Materials · doi:10.1038/nmat2629 · Cited by 8,337
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Self-citationNoh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Cited by
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
Solution-processed hybrid perovskite photodetectors with high detectivity
Dou, L., Yang, Y., You, J., Hong, Z., Chang, W.-H., Li, G., & Yang, Y. (2014) · Nature Communications · doi:10.1038/ncomms6404 · Cited by 2,765
Self-citationImpact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
Excitons versus free charges in organo-lead tri-halide perovskites
D’Innocenzo, V., Grancini, G., Alcocer, M. J. P., Kandada, A. R. S., Stranks, S. D., Lee, M. M., Lanzani, G., Snaith, H. J., & Petrozza, A. (2014) · Nature Communications · doi:10.1038/ncomms4586 · Cited by 1,767
Chen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Self-citationA Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Self-citationUnderstanding the physical properties of hybrid perovskites for photovoltaic applications
Huang, J., Yuan, Y., Shao, Y., & Yan, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.42 · Cited by 1,252
Kim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833
Flexible and Semitransparent Organic Solar Cells
Li, Y., Xu, G., Cui, C., & Li, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701791 · Cited by 788
Moisture assisted perovskite film growth for high performance solar cells
You, J., Yang, Y. (., Hong, Z., Song, T.-B., Meng, L., Liu, Y., Jiang, C., Zhou, H., Chang, W.-H., Li, G., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4901510 · Cited by 786
Self-citationCauses and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Jeng, J., Chen, K., Chiang, T., Lin, P., Tsai, T., Chang, Y., Guo, T., Chen, P., Wen, T., & Hsu, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306217 · Cited by 710
Highly efficient and bending durable perovskite solar cells: toward a wearable power source
Kim, B. J., Kim, D. H., Lee, Y.-Y., Shin, H.-W., Han, G. S., Hong, J. S., Mahmood, K., Ahn, T. K., Joo, Y.-C., Hong, K. S., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02441a · Cited by 679
Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells
Seo, J., Park, S., Chan Kim, Y., Jeon, N. J., Noh, J. H., Yoon, S. C., & Seok, S. I. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01216j · Cited by 677
Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells
Meng, L., You, J., Guo, T.-F., & Yang, Y. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00404 · Cited by 659
Self-citationBulk heterojunction perovskite–PCBM solar cells with high fill factor
Chiang, C.-H., & Wu, C.-G. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.3 · Cited by 624
Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
Ono, L. K., Juarez-Perez, E. J., & Qi, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06001 · Cited by 593
Recent progress in electron transport layers for efficient perovskite solar cells
Yang, G., Tao, H., Qin, P., Ke, W., & Fang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09011c · Cited by 579
Zhang, H., Cheng, J., Lin, F., He, H., Mao, J., Wong, K. S., Jen, A. K.-Y., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b07043 · Cited by 560
Recent progress in flexible–wearable solar cells for self-powered electronic devices
Hashemi, S. A., Ramakrishna, S., & Aberle, A. G. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03046h · Cited by 527
Tress, W., Marinova, N., Inganäs, O., Nazeeruddin, M. K., Zakeeruddin, S. M., & Graetzel, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400812 · Cited by 522
Bag, M., Renna, L. A., Adhikari, R. Y., Karak, S., Liu, F., Lahti, P. M., Russell, T. P., Tuominen, M. T., & Venkataraman, D. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08535 · Cited by 499
New-generation integrated devices based on dye-sensitized and perovskite solar cells
Yun, S., Qin, Y., Uhl, A. R., Vlachopoulos, N., Yin, M., Li, D., Han, X., & Hagfeldt, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03165c · Cited by 478
Philippe, B., Park, B.-W., Lindblad, R., Oscarsson, J., Ahmadi, S., Johansson, E. M. J., & Rensmo, H. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00348 · Cited by 462
Advances in hole transport materials engineering for stable and efficient perovskite solar cells
Bakr, Z. H., Wali, Q., Fakharuddin, A., Schmidt-Mende, L., Brown, T. M., & Jose, R. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.025 · Cited by 455
Influence of Solvent Coordination on Hybrid Organic–Inorganic Perovskite Formation
Hamill, J. C., Schwartz, J., & Loo, Y.-L. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01057 · Cited by 451
Flexible Perovskite Solar Cells
Jung, H. S., Han, G. S., Park, N.-G., & Ko, M. J. (2019) · Joule · doi:10.1016/j.joule.2019.07.023 · Cited by 449
p-type Mesoscopic Nickel Oxide/Organometallic Perovskite Heterojunction Solar Cells
Wang, K.-C., Jeng, J.-Y., Shen, P.-S., Chang, Y.-C., Diau, E. W.-G., Tsai, C.-H., Chao, T.-Y., Hsu, H.-C., Lin, P.-Y., Chen, P., et al. (2014) · Scientific Reports · doi:10.1038/srep04756 · Cited by 444
Roldán-Carmona, C., Gratia, P., Zimmermann, I., Grancini, G., Gao, P., Graetzel, M., & Nazeeruddin, M. K. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02555a · Cited by 431
Pu, X., Hu, W., & Wang, Z. L. (2018) · Small · doi:10.1002/smll.201702817 · Cited by 378
Organic–inorganic halide perovskite/crystalline silicon four-terminal tandem solar cells
Löper, P., Moon, S.-J., Martín de Nicolas, S., Niesen, B., Ledinsky, M., Nicolay, S., Bailat, J., Yum, J.-H., De Wolf, S., & Ballif, C. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp03788j · Cited by 367
Liang, P., Chueh, C., Williams, S. T., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402321 · Cited by 353
Magnetic field effects in hybrid perovskite devices
Zhang, C., Sun, D., Sheng, C.-X., Zhai, Y. X., Mielczarek, K., Zakhidov, A., & Vardeny, Z. V. (2015) · Nature Physics · doi:10.1038/nphys3277 · Cited by 301
Ru, P., Bi, E., Zhang, Y., Wang, Y., Kong, W., Sha, Y., Tang, W., Zhang, P., Wu, Y., Chen, W., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903487 · Cited by 298
Tan, K. W., Moore, D. T., Saliba, M., Sai, H., Estroff, L. A., Hanrath, T., Snaith, H. J., & Wiesner, U. (2014) · ACS Nano · doi:10.1021/nn500526t · Cited by 293
Sepalage, G. A., Meyer, S., Pascoe, A., Scully, A. D., Huang, F., Bach, U., Cheng, Y., & Spiccia, L. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502541 · Cited by 290
Chen, W.-Y., Deng, L.-L., Dai, S.-M., Wang, X., Tian, C.-B., Zhan, X.-X., Xie, S.-Y., Huang, R.-B., & Zheng, L.-S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05286f · Cited by 290
Encapsulation for improving the lifetime of flexible perovskite solar cells
Weerasinghe, H. C., Dkhissi, Y., Scully, A. D., Caruso, R. A., & Cheng, Y.-B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.10.006 · Cited by 284
Halide Perovskites: A New Era of Solution‐Processed Electronics
Younis, A., Lin, C., Guan, X., Shahrokhi, S., Huang, C., Wang, Y., He, T., Singh, S., Hu, L., Retamal, J. R. D., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005000 · Cited by 282
Metadata
- Authors
- You, J., Hong, Z., Yang, Y. (., Chen, Q., Cai, M., Song, T.-B., Chen, C.-C., Lu, S., Liu, Y., Zhou, H., & Yang, Y.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-07
- Volume
- 8
- Issue
- 2
- Pages
- 1674-1680
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2102969048
- Cited by
- 1,448
- References
- 34
- FWCI
- 133.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
