The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
High-Performance Chemical Sensing Using Schottky-Contacted Chemical Vapor Deposition Grown Monolayer MoS2 Transistors
Abstract
Trace chemical detection is important for a wide range of practical applications. Recently emerged two-dimensional (2D) crystals offer unique advantages as potential sensing materials with high sensitivity, owing to their very high surface-to-bulk atom ratios and semiconducting properties. Here, we report the first use of Schottky-contacted chemical vapor deposition grown monolayer MoS2 as high-performance room temperature chemical sensors. The Schottky-contacted MoS2 transistors show current changes by 2-3 orders of magnitude upon exposure to very low concentrations of NO2 and NH3. Specifically, the MoS2 sensors show clear detection of NO2 and NH3 down to 20 ppb and 1 ppm, respectively. We attribute the observed high sensitivity to both well-known charger transfer mechanism and, more importantly, the Schottky barrier modulation upon analyte molecule adsorption, the latter of which is made possible by the Schottky contacts in the transistors and is not reported previously for MoS2 sensors. This study shows the potential of 2D semiconductors as high-performance sensors and also benefits the fundamental studies of interfacial phenomena and interactions between chemical species and monolayer 2D semiconductors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physics of Semiconductor Devices
Sze, S. M., & Ng, K. K. (2006) · doi:10.1002/0470068329 · Cited by 14,627
Synthesis of MoS 2 and MoSe 2 Films with Vertically Aligned Layers
Kong, D., Wang, H., Cha, J. J., Pasta, M., Koski, K. J., Yao, J., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl400258t · Cited by 2,250
Controlled Synthesis of Highly Crystalline MoS 2 Flakes by Chemical Vapor Deposition
Wang, X., Feng, H., Wu, Y., & Jiao, L. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4013485 · Cited by 748
Subthreshold Regime has the Optimal Sensitivity for Nanowire FET Biosensors
Gao, X. P. A., Zheng, G., & Lieber, C. M. (2010) · Nano Letters · doi:10.1021/nl9034219 · Cited by 571
Cited by
Environmental Applications of 2D Molybdenum Disulfide (MoS2) Nanosheets
Wang, Z., & Mi, B. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b01466 · Cited by 914
Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials
Meng, Z., Stolz, R. M., Mendecki, L., & Mirica, K. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00311 · Cited by 773
Interface-Assisted Synthesis of 2D Materials: Trend and Challenges
Dong, R., Zhang, T., & Feng, X. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00056 · Cited by 710
Schmidt, H., Giustiniano, F., & Eda, G. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00275c · Cited by 466
Surface Modification of 2D Photocatalysts for Solar Energy Conversion
Feng, C., Wu, Z., Huang, K., Ye, J., & Zhang, H. (2022) · Advanced Materials · doi:10.1002/adma.202200180 · Cited by 456
Metadata
- Authors
- Liu, B., Chen, L., Liu, G., Abbas, A. N., Fathi, M., & Zhou, C.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-04-21
- Volume
- 8
- Issue
- 5
- Pages
- 5304-5314
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2156162873
- Cited by
- 728
- References
- 4
- FWCI
- 32.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.