The DOI matches its Crossref record.
Atomic Resolution Study of Reversible Conversion Reaction in Metal Oxide Electrodes for Lithium-Ion Battery
Abstract
Electrode materials based on conversion reactions with lithium ions have shown much higher energy density than those based on intercalation reactions. Here, nanocubes of a typical metal oxide (Co3O4) were grown on few-layer graphene, and their electrochemical lithiation and delithiation were investigated at atomic resolution by in situ transmission electron microscopy to reveal the mechanism of the reversible conversion reaction. During lithiation, a lithium-inserted Co3O4 phase and a phase consisting of nanosized Co-Li-O clusters are identified as the intermediate products prior to the subsequent formation of Li2O crystals. In delithiation, the reduced metal nanoparticles form a network and breakdown into even smaller clusters that act as catalysts to prompt reduction of Li2O, and CoO nanoparticles are identified as the product of the deconversion reaction. Such direct real-space, real-time atomic-scale observations shed light on the phenomena and mechanisms in reaction-based electrochemical energy conversion and provide impetus for further development in electrochemical charge storage devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nanostructured Conversion-type Anode Materials for Advanced Lithium-Ion Batteries
Lu, Y., Yu, L., & Lou, X. W. (. (2018) · Chem · doi:10.1016/j.chempr.2018.01.003 · Cited by 783
Conversion Reaction‐Based Oxide Nanomaterials for Lithium Ion Battery Anodes
Yu, S., Lee, S. H., Lee, D. J., Sung, Y., & Hyeon, T. (2016) · Small · doi:10.1002/smll.201502299 · Cited by 499
Yuan, Y., Amine, K., Lu, J., & Shahbazian-Yassar, R. (2017) · Nature Communications · doi:10.1038/ncomms15806 · Cited by 404
Atomic Layer‐by‐Layer Co3O4/Graphene Composite for High Performance Lithium‐Ion Batteries
Dou, Y., Xu, J., Ruan, B., Liu, Q., Pan, Y., Sun, Z., & Dou, S. X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501835 · Cited by 348
Self-citationRecent progress in conversion reaction metal oxide anodes for Li-ion batteries
Cao, K., Jin, T., Yang, L., & Jiao, L. (2017) · Materials Chemistry Frontiers · doi:10.1039/c7qm00175d · Cited by 343
Maduraiveeran, G., Sasidharan, M., & Jin, W. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100574 · Cited by 321
Palanisamy, M., Perumal, R., Zhang, D., Wang, H., Maximova, O., Rokhinson, L., & Pol, V. G. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta01354a · Cited by 5
Metadata
- Authors
- Luo, L., Wu, J., Xu, J., & Dravid, V. P.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-10-28
- Volume
- 8
- Issue
- 11
- Pages
- 11560-11566
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2319589097
- Cited by
- 161
- References
- 0
- FWCI
- 9.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.