The DOI matches its Crossref record.
Layer-by-Layer Dielectric Breakdown of Hexagonal Boron Nitride
Abstract
Hexagonal boron nitride (BN) is widely used as a substrate and gate insulator for two-dimensional (2D) electronic devices. The studies on insulating properties and electrical reliability of BN itself, however, are quite limited. Here, we report a systematic investigation of the dielectric breakdown characteristics of BN using conductive atomic force microscopy. The electric field strength was found to be ∼ 12 MV/cm, which is comparable to that of conventional SiO2 oxides because of the covalent bonding nature of BN. After the hard dielectric breakdown, the BN fractured like a flower into equilateral triangle fragments. However, when the applied voltage was terminated precisely in the middle of the dielectric breakdown, the formation of a hole that did not penetrate to the bottom metal electrode was clearly observed. Subsequent I-V measurements of the hole indicated that the BN layer remaining in the hole was still electrically inactive. On the basis of these observations, layer-by-layer breakdown was confirmed for BN with regard to both physical fracture and electrical breakdown. Moreover, statistical analysis of the breakdown voltages using a Weibull plot suggested the anisotropic formation of defects. These results are unique to layered materials and unlike the behavior observed for conventional 3D amorphous oxides.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Two dimensional hexagonal boron nitride (2D-hBN): synthesis, properties and applications
Zhang, K., Feng, Y., Wang, F., Yang, Z., & Wang, J. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc04300g · Cited by 1,218
Transistors based on two-dimensional materials for future integrated circuits
Das, S., Sebastian, A., Pop, E., McClellan, C. J., Franklin, A. D., Grasser, T., Knobloch, T., Illarionov, Y., Penumatcha, A. V., Appenzeller, J., et al. (2021) · Nature Electronics · doi:10.1038/s41928-021-00670-1 · Cited by 983
Structure, Properties and Applications of Two‐Dimensional Hexagonal Boron Nitride
Roy, S., Zhang, X., Puthirath, A. B., Meiyazhagan, A., Bhattacharyya, S., Rahman, M. M., Babu, G., Susarla, S., Saju, S. K., Tran, M. K., et al. (2021) · Advanced Materials · doi:10.1002/adma.202101589 · Cited by 871
Insulators for 2D nanoelectronics: the gap to bridge
Illarionov, Y. Y., Knobloch, T., Jech, M., Lanza, M., Akinwande, D., Vexler, M. I., Mueller, T., Lemme, M. C., Fiori, G., Schwierz, F., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16640-8 · Cited by 552
High-κ perovskite membranes as insulators for two-dimensional transistors
Huang, J.-K., Wan, Y., Shi, J., Zhang, J., Wang, Z., Wang, W., Yang, N., Liu, Y., Lin, C.-H., Guan, X., et al. (2022) · Nature · doi:10.1038/s41586-022-04588-2 · Cited by 373
Metadata
- Authors
- Hattori, Y., Taniguchi, T., Watanabe, K., & Nagashio, K.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-12-31
- Volume
- 9
- Issue
- 1
- Pages
- 916-921
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2963597307
- Cited by
- 242
- References
- 0
- FWCI
- 3.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Layer-by-Layer Dielectric Breakdown of Hexagonal Boron Nitride. https://app.cochat.ai/papers/10.1021/nn506645q
- The paper
- Hattori, Y., Taniguchi, T., Watanabe, K., & Nagashio, K. (2015). Layer-by-Layer Dielectric Breakdown of Hexagonal Boron Nitride. ACS Nano. https://doi.org/10.1021/nn506645q
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.