The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Rapid Determination of Reaction Kinetics with an Automated Microfluidic System
Abstract
Kinetic information is used to determine the optimal reaction conditions, to successfully scale up a reaction from the laboratory to the pilot plant, and to improve process control. Obtaining accurate kinetics using conventional benchtop equipment and techniques, however, requires numerous experiments and can be complicated by sluggish mixing and heat-transfer rates. To improve the speed and efficiency in gathering reaction kinetics, we present an automated, silicon microreactor system that uses a sequential experimentation framework driven by model-based optimization feedback for online reaction rate parameter determination. The method, based on Information Theory and Bayesian Statistics, first selects the appropriate global reaction rate expression. After determining the correct rate law, a D-optimal strategy precisely estimates the pre-exponential and activation energy of the rate constant. The approaches are validated experimentally with a model system, the Diels−Alder reaction of isoprene and maleic anhydride in DMF. The benefits of quickly obtaining this information with an automated microreactor system are further demonstrated by successfully scaling the Diels−Alder reaction by a factor of 500 from a microreactor to a Corning flow reactor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Statistical tools for optimal dynamic model building
Asprey, S. P., & Macchietto, S. (2000) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(00)00328-8 · Cited by 244
Cited by
The Hitchhiker’s Guide to Flow Chemistry
Plutschack, M. B., Pieber, B., Gilmore, K., & Seeberger, P. H. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00183 · Cited by 1,995
Deciding Whether To Go with the Flow: Evaluating the Merits of Flow Reactors for Synthesis
Hartman, R. L., McMullen, J. P., & Jensen, K. F. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201004637 · Cited by 999
Self-citationShen, S., Li, X.-F., Cullen, W. R., Weinfeld, M., & Le, X. C. (2013) · Chemical Reviews · doi:10.1021/cr300015c · Cited by 818
Self-Driving Laboratories for Chemistry and Materials Science
Tom, G., Schmid, S. P., Baird, S. G., Cao, Y., Darvish, K., Hao, H., Lo, S., Pablo-García, S., Rajaonson, E. M., Skreta, M., et al. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00055 · Cited by 707
Novel Process Windows for Enabling, Accelerating, and Uplifting Flow Chemistry
Hessel, V., Kralisch, D., Kockmann, N., Noël, T., & Wang, Q. (2013) · ChemSusChem · doi:10.1002/cssc.201200766 · Cited by 596
Metadata
- Authors
- McMullen, J. P., & Jensen, K. F.
- Venue
- Organic Process Research & Development
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-03-04
- Volume
- 15
- Issue
- 2
- Pages
- 398-407
- ISSN
- 1083-6160 (ISSN-L)
- 1520-586X
- OpenAlex
- W2067508454
- Cited by
- 171
- References
- 1
- FWCI
- 6.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.