Influence of Si/Al Ratio of ZSM-5 Zeolite on the Properties of Lignin Pyrolysis Products
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The pyrolysis of softwood (SW) kraft lignin in the presence of various H-ZSM-5 zeolites with different SiO 2 /Al 2 O 3 mole ratios from 23/1–280/1 as additives were examined at 600 °C. Nuclear magnetic resonance (NMR), including quantitative 13 C, 31 P NMR, and heteronuclear single-quantum correlation (HSQC)-NMR, and gel permeation chromatography (GPC) were used to characterize various pyrolysis oils. On the basis of the results of the 13 C and 31 P NMR for pyrolysis oils, the use of H-ZSM-5 zeolites during the pyrolysis process caused the near complete decomposition of aliphatic hydroxyl and carboxyl groups. With the exception of carboxylic acid, the H-ZSM-5 zeolite with a relatively higher SiO 2 /Al 2 O 3 mole ratio was more effective at the elimination of methoxyl groups, ether bonds, and aliphatic C–C bonds, and dehydration of aliphatic hydroxyl groups during pyrolysis. However, the H-ZSM-5 zeolite with a very large SiO 2 /Al 2 O 3 mole ratio, such as 280, has only limited effects on the properties of upgraded pyrolysis oil. After the use of zeolite, the pyrolysis oils contain some polyaromatic hydrocarbons, the content of which decreased with an increasing SiO 2 /Al 2 O 3 mole ratio of zeolite. GPC results show that the molecular weight decreased by 8–16% after the use of H-ZSM-5 zeolites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Screening acidic zeolites for catalytic fast pyrolysis of biomass and its components
Mihalcik, D. J., Mullen, C. A., & Boateng, A. A. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.06.001 · Cited by 513
Screening heterogeneous catalysts for the pyrolysis of lignin
Jackson, M. A., Compton, D. L., & Boateng, A. A. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.09.016 · Cited by 187
Cited by
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading
Schutyser, W., Renders, T., Van den Bosch, S., Koelewijn, S.-F., Beckham, G. T., & Sels, B. F. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00566k · Cited by 2,552
Potential and challenges of zeolite chemistry in the catalytic conversion of biomass
Ennaert, T., Van Aelst, J., Dijkmans, J., De Clercq, R., Schutyser, W., Dusselier, M., Verboekend, D., & Sels, B. F. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00859j · Cited by 806
Catalytic fast pyrolysis of biomass over zeolites for high quality bio-oil – A review
Rahman, M. M., Liu, R., & Cai, J. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.08.002 · Cited by 383
Nishu, Liu, R., Rahman, M. M., Sarker, M., Chai, M., Li, C., & Cai, J. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106301 · Cited by 319
Metadata
- Authors
- Ben, H., & Ragauskas, A. J.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-01-31
- Volume
- 1
- Issue
- 3
- Pages
- 316-324
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2330573573
- Cited by
- 133
- References
- 2
- FWCI
- 5.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of Si/Al Ratio of ZSM-5 Zeolite on the Properties of Lignin Pyrolysis Products. https://app.cochat.ai/papers/10.1021/sc300074n
- The paper
- Ben, H., & Ragauskas, A. J. (2013). Influence of Si/Al Ratio of ZSM-5 Zeolite on the Properties of Lignin Pyrolysis Products. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/sc300074n
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.