The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Nanocellulose Life Cycle Assessment
Abstract
Nanocellulose is a nascent and promising material with many exceptional properties and a broad spectrum of potential applications. Because of the unique and functional materials that can be created using nanocellulose, pilot-scale development for commercialization has begun. Thus a thorough understanding of its environmental impact, covering the whole life cycle of nanocellulose, becomes the foundation for its long-term sustainable success. In this current study, four comparable lab scale nanocellulose fabrication routes were evaluated through a cradle-to-gate life cycle assessment (LCA) adopting the Eco-Indicator 99 method. The results indicated that, for the chemical–mechanical fabrication routes, the majority of the environmental impact of nanocellulose fabrication is dependent upon both the chemical modification and mechanical treatment route chosen. For sonication, the mechanical treatment overshadows that from the chemical modifications. Adapting the best practice based on unit mass production was 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) oxidation followed by homogenization, as TEMPO oxidation resulted in a lower impact than carboxymethylation. Even though the fabrication process of nanocellulose presents a large environmental footprint markup relative to its raw material extraction process (kraft pulping), it still exhibits prominent environmental advantages over other nanomaterials like carbon nanotubes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
US Environmental Protection Agency
(1998) · Choice Reviews Online · doi:10.5860/choice.35-4455 · Cited by 5,897
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
TEMPO-oxidized cellulose nanofibers
Isogai, A., Saito, T., & Fukuzumi, H. (2011) · Nanoscale · doi:10.1039/c0nr00583e · Cited by 3,179
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis
Bondeson, D., Mathew, A., & Oksman, K. (2006) · Cellulose · doi:10.1007/s10570-006-9061-4 · Cited by 1,372
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Cited by
Nanofibrils in nature and materials engineering
Ling, S., Kaplan, D. L., & Buehler, M. J. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.16 · Cited by 730
Cellulose Nanomaterials in Water Treatment Technologies
Carpenter, A. W., de Lannoy, C.-F., & Wiesner, M. R. (2015) · Environmental Science & Technology · doi:10.1021/es506351r · Cited by 674
Environmental Assessment of Emerging Technologies: Recommendations for Prospective LCA
Arvidsson, R., Tillman, A., Sandén, B. A., Janssen, M., Nordelöf, A., Kushnir, D., & Molander, S. (2018) · Journal of Industrial Ecology · doi:10.1111/jiec.12690 · Cited by 539
Advances in cellulose nanomaterials
Kargarzadeh, H., Mariano, M., Gopakumar, D., Ahmad, I., Thomas, S., Dufresne, A., Huang, J., & Lin, N. (2018) · Cellulose · doi:10.1007/s10570-018-1723-5 · Cited by 508
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
Biopolymer nanofibrils: Structure, modeling, preparation, and applications
Ling, S., Chen, W., Fan, Y., Zheng, K., Jin, K., Yu, H., Buehler, M. J., & Kaplan, D. L. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.004 · Cited by 463
Production routes to tailor the performance of cellulose nanocrystals
Vanderfleet, O. M., & Cranston, E. D. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00239-y · Cited by 456
Mori, R. (2023) · RSC Sustainability · doi:10.1039/d2su00014h · Cited by 335
Nanocellulose nanocomposite hydrogels: technological and environmental issues
Nascimento, D. M., Nunes, Y. L., Figueirêdo, M. C. B., de Azeredo, H. M. C., Aouada, F. A., Feitosa, J. P. A., Rosa, M. F., & Dufresne, A. (2018) · Green Chemistry · doi:10.1039/c8gc00205c · Cited by 332
Protein nanofibrils for next generation sustainable water purification
Peydayesh, M., & Mezzenga, R. (2021) · Nature Communications · doi:10.1038/s41467-021-23388-2 · Cited by 317
Hoo, D. Y., Low, Z. L., Low, D. Y. S., Tang, S. Y., Manickam, S., Tan, K. W., & Ban, Z. H. (2022) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2022.106176 · Cited by 309
Mohammed, N., Grishkewich, N., & Tam, K. C. (2018) · Environmental Science: Nano · doi:10.1039/c7en01029j · Cited by 303
Environmental science and engineering applications of nanocellulose-based nanocomposites
Wei, H., Rodriguez, K., Renneckar, S., & Vikesland, P. J. (2014) · Environ. Sci.: Nano · doi:10.1039/c4en00059e · Cited by 277
Self-citationOverview of Cellulose Nanomaterials, Their Capabilities and Applications
Moon, R. J., Schueneman, G. T., & Simonsen, J. (2016) · JOM · doi:10.1007/s11837-016-2018-7 · Cited by 263
Nanocellulose for Sustainable Water Purification
Das, R., Lindström, T., Sharma, P. R., Chi, K., & Hsiao, B. S. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00683 · Cited by 261
Shanmugam, K., Doosthosseini, H., Varanasi, S., Garnier, G., & Batchelor, W. (2019) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2019.e00115 · Cited by 78
Metadata
- Authors
- Li, Q., McGinnis, S., Sydnor, C., Wong, A., & Renneckar, S.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-05-31
- Volume
- 1
- Issue
- 8
- Pages
- 919-928
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2327099720
- Cited by
- 262
- References
- 35
- FWCI
- 3.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.