Adsorption Removal of Dyes from Single and Binary Solutions Using a Cellulose-based Bioadsorbent
The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Abstract
A high efficiency and eco-friendly porous cellulose-based bioadsorbent was synthesized by grafting acrylic acid and acrylamide to remove anionic dye acid blue 93 (AB93) and cationic dye methylene blue (MB) from single and binary dye solutions. The effects of initial dye concentration, bioadsorbent dosage, contact time, solution pH value, temperature, ionic strength and surfactant content on the adsorption capacity of the bioadsorbent were investigated. The maximum adsorption capacities of the bioadsorbent for both AB93 and MB were 1372 mg g –1 at an initial concentration of 2500 mg L –1 . The conditions-dependent adsorption characteristics of the bioadsorbent indicated a high efficiency of dyes removal. The appropriate isotherm model for the equilibrium process was the Freundlich, and the kinetic studies revealed that the adsorption of AB93 and MB followed the pseudo-second-order kinetic models. The adsorbent behaviors were dominated by the electrostatic interactions between the bioadsorbents and the dye molecules. Moreover, the recyclability experiments showed that the bioadsorbent could be reused for at least three cycles with stable adsorption capacity even in complex systems containing binary-dyes, salt, and surfactant. Thus, the cellulose-based bioadsorbent can be effectively used for the removal of dyes from industrial textile wastewater.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Three-Dimensional Graphene Oxide Nanostructure for Fast and Efficient Water-Soluble Dye Removal
Liu, F., Chung, S., Oh, G., & Seo, T. S. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201590z · Cited by 671
Cellulose whiskers extracted from mulberry: A novel biomass production
Li, R., Fei, J., Cai, Y., Li, Y., Feng, J., & Yao, J. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.09.034 · Cited by 533
Self-citationGhorai, S., Sarkar, A., Raoufi, M., Panda, A. B., Schönherr, H., & Pal, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4055657 · Cited by 529
Xie, Y., Yan, B., Xu, H., Chen, J., Liu, Q., Deng, Y., & Zeng, H. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501632f · Cited by 429
Pei, A., Butchosa, N., Berglund, L. A., & Zhou, Q. (2013) · Soft Matter · doi:10.1039/c2sm27344f · Cited by 368
Structure and Mechanical Properties of Wet-Spun Fibers Made from Natural Cellulose Nanofibers
Iwamoto, S., Isogai, A., & Iwata, T. (2011) · Biomacromolecules · doi:10.1021/bm101510r · Cited by 337
One-step synthesis of magnetic composites of cellulose@iron oxide nanoparticles for arsenic removal
Yu, X., Tong, S., Ge, M., Zuo, J., Cao, C., & Song, W. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00315e · Cited by 336
Gong, R., Ye, J., Dai, W., Yan, X., Hu, J., Hu, X., Li, S., & Huang, H. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie402138w · Cited by 323
Zhang, S., Zhang, Y., Bi, G., Liu, J., Wang, Z., Xu, Q., Xu, H., & Li, X. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.01.039 · Cited by 269
Recycling Rare Earth Elements from Industrial Wastewater with Flowerlike Nano-Mg(OH)2
Li, C., Zhuang, Z., Huang, F., Wu, Z., Hong, Y., & Lin, Z. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4027967 · Cited by 199
Research works printed but not linked: 1
- Liang X. Y., 2013, BioResources, 8, 130
Cited by
Items 101–200 of 587
A pH- and Temperature-Responsive Magnetic Composite Adsorbent for Targeted Removal of Nonylphenol
Yang, Z., Ning, Z., Shaopeng, Z., Dong, Y., Zhang, X., Shen, J., Weiben, Y., Yuping, W., & Jianqiang, C. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b08709 · Cited by 84
Ma, J., Ma, Y., Yu, F., & Dai, X. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b05409 · Cited by 84
Dashtian, K., Porhemmat, S., Rezvani, A. R., Ghaedi, M., & Sabzehmeidani, M. M. (2017) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.11.026 · Cited by 81
Tahazadeh, S., Mohammadi, T., Tofighy, M. A., Khanlari, S., Karimi, H., & Emrooz, H. B. M. (2021) · Journal of Membrane Science · doi:10.1016/j.memsci.2021.119692 · Cited by 81
Muslim, M., Ali, A., Neogi, I., Dege, N., Shahid, M., & Ahmad, M. (2021) · Polyhedron · doi:10.1016/j.poly.2021.115519 · Cited by 81
Evaluating role of immobilized periphyton in bioremediation of azo dye amaranth
Shabbir, S., Faheem, M., Ali, N., Kerr, P. G., & Wu, Y. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.11.115 · Cited by 81
“Many methods have been employed for the treatment of azo dyes, including; 45 physico-chemical such as adsorption (Liu et al., 2015), ozonation (Dan et al., 2013), catalytic 46 degradation (Wang et al., 2014), Fenton’s reaction (Li et al., 2016), chlorination (Osugi et al., 47 2009) and biological…”
MethodChen, S., Lü, W., Han, J., Zhong, H., Xu, T., Wang, G., & Chen, W. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.110 · Cited by 81
Polyfunctional cotton fabrics with catalytic activity and antibacterial capacity
Bouazizi, N., Ahmida, E. A., Campagne, C., Vieillard, J., & Azzouz, A. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.06.050 · Cited by 79
Karimi, R., Yousefi, F., Ghaedi, M., & Dashtian, K. (2016) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2016.10.012 · Cited by 78
“Water pollutions consist of highly toxic organic dyes is an important environmental issue, and receives major worldwide concerns [1,2].”
BackgroundParshi, N., Pan, D., Dhavle, V., Jana, B., Maity, S., & Ganguly, J. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.09.025 · Cited by 78
Wang, Y., Wang, H., Peng, H., Wang, Z., Wu, J., & Liu, Z. (2018) · Fibers and Polymers · doi:10.1007/s12221-018-7520-9 · Cited by 77
Molavi, H., Neshastehgar, M., Shojaei, A., & Ghashghaeinejad, H. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.125882 · Cited by 77
Halysh, V., Sevastyanova, O., Pikus, S., Dobele, G., Pasalskiy, B., Гунько, В. М., & Картель, М. Т. (2020) · Cellulose · doi:10.1007/s10570-020-03339-8 · Cited by 77
Yousefzadeh, Y., Izadkhah, V., Sobhanardakani, S., Lorestani, B., & Alavinia, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127391 · Cited by 80
Zheng, Y., Liu, J., Cheng, B., You, W., Ho, W., & Tang, H. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.106 · Cited by 76
Crosslinked cellulose dialdehyde for Congo red removal from its aqueous solutions
Kumari, S., Mankotia, D., & Chauhan, G. S. (2016) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2016.01.008 · Cited by 76
Yadav, M., Thakore, S. I., & Jadeja, R. N. (2021) · Environmental Chemistry and Ecotoxicology · doi:10.1016/j.enceco.2021.12.003 · Cited by 75
Dhanavel, S., Nivethaa, E. A. K., Dhanapal, K., Gupta, V. K., Narayanan, V., & Stephen, A. (2016) · RSC Advances · doi:10.1039/c6ra02576e · Cited by 75
Sriram, G., Uthappa, U. T., Rego, R. M., Kigga, M., Kumeria, T., Jung, H., & Kurkuri, M. D. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.124692 · Cited by 74
The improved photocatalytic activity of highly expanded MoS 2 under visible light emitting diodes
Lai, M. T. L., Lee, K. M., Yang, T. C. ‐., Pan, G., Lai, C. W., Chen, C., Johan, M. R., & Juan, J. C. (2020) · Nanoscale Advances · doi:10.1039/d0na00936a · Cited by 74
Bazzazan, S., Moeinabadi‐Bidgoli, K., Lalami, Z. A., Bazzazan, S., Mehrarya, M., Yeganeh, F. E., Hejabi, F., Akbarzadeh, I., Noorbazargan, H., Jahanbakhshi, M., et al. (2022) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2022.104009 · Cited by 74
Saleh, H. A. M., Mantasha, I., Qasem, K. M. A., Shahid, M., Akhtar, M. N., AlDamen, M. A., & Ahmad, M. (2020) · Inorganica Chimica Acta · doi:10.1016/j.ica.2020.119900 · Cited by 73
Highly efficient selective adsorption of anionic dyes by modified β-cyclodextrin polymers
Xu, M., Jiang, H., Xie, Z.-W., Li, Z.-T., Xu, D., & He, F. (2020) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2020.01.005 · Cited by 73
Emerging 2D MXene -based adsorbents for hazardous pollutants removal
Solangi, N. H., Karri, R. R., Mubarak, N. M., Mazari, S. A., Jatoi, A. S., & Koduru, J. R. (2023) · Desalination · doi:10.1016/j.desal.2022.116314 · Cited by 73
Recent Advances in Nanocellulose Aerogels for Efficient Heavy Metal and Dye Removal
Azfaralariff, A., Kamaruddin, M. A., Khalil, H. P. S. A., Yahya, E. B., Muhammad, S., Rizal, S., Ahmad, M. I., Surya, I., & Abdullah, C. K. (2023) · Gels · doi:10.3390/gels9050416 · Cited by 75
“Cellulose aerogel modified with acrylamide and acrylic acid Acid blue and methylene blue 1372 [100]”
BackgroundMethodInfluentialUma, B., Anantharaju, K. S., Renuka, L., Nagabhushana, H., Malini, S., More, S. S., Vidya, Y. S., & Meena, S. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.09.223 · Cited by 71
Kumar, R., Rai, B., Gahlyan, S., & Kumar, G. (2020) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2021.11 · Cited by 71
“…fibers possessed high surface area, hydrophilicity, non-toxicity, nano-size, and bio-adsorp-tion ability, etc. Nanocellulose can be a suitable material used to remove organic pollutants ( e.g ., dyes, oils, pesticides, and heavy metal ions, etc.) from contaminated water (Figure 6) [84, 106].”
Grafted cellulose: a bio-based polymer for durable applications
Kumar, R., Sharma, R. K., & Singh, A. P. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-2136-6 · Cited by 71
Patra, S., Roy, E., Madhuri, R., & Sharma, P. K. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2015.10.008 · Cited by 68
Bouazizi, N., Vieillard, J., Thébault, P., Desriac, F., Clamens, T., Bargougui, R., Couvrat, N., Thoumire, O., Brun, N., Ladam, G. D., et al. (2018) · Dalton Transactions · doi:10.1039/c8dt02154f · Cited by 70
Dye contaminated wastewater treatment through metal–organic framework (MOF) based materials
Maru, K., Kalla, S., & Jangir, R. (2021) · New Journal of Chemistry · doi:10.1039/d1nj05015j · Cited by 67
Mu, Y., Du, H., He, W., & Ma, H. (2021) · Diamond and Related Materials · doi:10.1016/j.diamond.2021.108795 · Cited by 68
Su, X., Liao, Q., Liu, L., Meng, R., Qian, Z., Gao, H., & Yao, J. (2016) · Cellulose · doi:10.1007/s10570-016-1154-0 · Cited by 67
“In the spectrum for cellulose, the characteristic peaks at 3427, 2912, 1440, 1378, 1123, 1067, and 895 cm are typical bands of cellulose molecules (Liu et al. 2015).”
BackgroundMethodSelf-citationDesigning Multifunctional Coatings for Cost-Effectively Sustainable Water Remediation
Cheng, X., Wang, Z., Guo, J., Ma, J., & Shao, L. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03296 · Cited by 67
Network of Polyaniline Nanotubes for Wastewater Treatment and Oil/Water Separation
Mondal, S., Rana, U., Das, P. K., & Malik, S. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00199 · Cited by 69
Goswami, B., & Mahanta, D. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.103919 · Cited by 67
Tang, Y., Zhao, J., Zhang, Y., Zhou, J., & Shi, B. Q. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.127987 · Cited by 68
Ao, C., Zhao, J., Xia, T. D., Huang, B., Wang, Q., Gai, J., Chen, Z., Zhang, W., & Lu, C. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.117603 · Cited by 66
Kumar, M., Gehlot, P. S., Parihar, D., Surolia, P. K., & Prasad, G. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110448 · Cited by 66
Chen, Z., Pan, Y., & Cai, P. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.02.035 · Cited by 66
Removal of synthetic dyes from multicomponent industrial wastewaters
Sharma, K., Dalai, A. K., & Vyas, R. K. (2017) · Reviews in Chemical Engineering · doi:10.1515/revce-2016-0042 · Cited by 69
Bio-sourced porous cellulose microfibrils from coffee pulp for wastewater treatment
Achaby, M. E., Ruesgas‐Ramón, M., Fayoud, N.-E., Figueroa‐Espinoza, M., Trabadelo, V., Draoui, K., & Youcef, H. B. (2019) · Cellulose · doi:10.1007/s10570-019-02344-w · Cited by 67
“These specific features of the extracted CMFs can be considered as an exception, because as far as we know, only bacterial native cellulose or modified cellulose exhibit these characteristics (Gea et al. 2011; Lopez-Sanchez et al. 2014).”
BackgroundZhu, S., Xu, J., Kuang, Y., Cheng, Z., Wu, Q., Xie, J., Wang, B., Gao, W., Zeng, J., Li, J., et al. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.113071 · Cited by 66
Pan, X., Zhang, M., Liu, H., Ouyang, S., Ding, N., & Zhang, P. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.146370 · Cited by 65
Huang, L.-Y., Li, W., Du, N., Lu, H., Meng, L.-D., Huang, K.-Y., & Li, K. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119995 · Cited by 64
Hao, L., Wang, P., & Valiyaveettil, S. (2017) · Scientific Reports · doi:10.1038/srep42881 · Cited by 63
“(2) yields a continuous equation valid in determining the variation of mass transfer factor.”
BackgroundAnusuyadevi, P. R., Riazanova, A. V., Hedenqvist, M. S., & Svagan, A. J. (2020) · ACS Omega · doi:10.1021/acsomega.0c02872 · Cited by 63
Somnath, Ahmad, M., & Siddiqui, K. A. (2022) · ACS Omega · doi:10.1021/acsomega.2c04669 · Cited by 62
Sahmoune, M. N., & Yeddou, A. R. (2016) · Desalination and Water Treatment · doi:10.1080/19443994.2015.1135824 · Cited by 65
Liu, L., Xie, J. P., Li, Y. J., Zhang, Q., & Ju, Y. (2015) · Cellulose · doi:10.1007/s10570-015-0837-2 · Cited by 62
“The cellulose-based bioadsorbents was synthesized by grafting AA and AM via free-radical copolymerization according to our previous reports with amplified input mass of raw materials (Wu et al. 2012; Liu et al. 2015).”
MethodSelf-citationAdvanced fabrication and application of pineapple aerogels from agricultural waste
N., N. H., Luu, T. P., Thai, Q. B., Le, D. K., Chau, N. D. Q., Nguyen, S. T., Le, P. K., Phan-Thien, N., & Duong, H. M. (2019) · Materials Technology · doi:10.1080/10667857.2019.1688537 · Cited by 63
Tang, M., Jia, R., Kan, H., Liu, Z., Yang, S., Sun, L., & Yang, Y. (2020) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2020.125009 · Cited by 60
Hernandes, P. R. T., Oliveira, M. L. S., Georgin, J., Franco, D. S. P., Allasia, D., & Dotto, G. L. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-06353-x · Cited by 61
Wu, Y., Chen, L., Long, X., Zhang, X., Pan, B., & Qian, J. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.12.037 · Cited by 61
Thakur, A. K., Lin, B., Nowrin, F. H., & Malmali, M. (2021) · ACS ES&T Water · doi:10.1021/acsestwater.1c00259 · Cited by 58
Fornari, A., Rossi, M., Rocco, D., & Mattiello, L. (2022) · Applied Sciences · doi:10.3390/app122412846 · Cited by 58
Abbasi, A., Khatoon, F., & Ikram, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123240 · Cited by 60
Liu, Q., Liu, Q., Wu, Z., Wu, Y. J., Gao, T., & Yao, J. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02593 · Cited by 58
Self-citationGouthaman, A., Azarudeen, R. S., Gnanaprakasam, A. J., Sivakumar, V. M., & Thirumarimurugan, M. (2018) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2018.05.011 · Cited by 58
Modification of cyclodextrin and use in environmental applications
Köse, K., Tüysüz, M., Aksüt, D., & Uzun, L. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-15005-y · Cited by 59
“…molecules to the structure provides improvement of physical properties such as specific surface area, volume, and porosity, which positively affect adsorption performance (Li et al. 2018a; Liu et al. 2015; Liu et al. 2020b; Liu et al. 2018b; Orelma et al. 2018; Yue et al. 2017; Zhao et al. 2015c).”
BackgroundPorhemmat, S., Ghaedi, M., Rezvani, A. R., Azqhandi, M. H. A., & Bazrafshan, A. A. (2017) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2017.03.053 · Cited by 57
Durán-Jiménez, G., Stevens, L. A., Hodgins, G. R., Uguna, J. O., Ryan, J., Binner, E. R., & Robinson, J. P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.135 · Cited by 57
An, Y., Zheng, H., Sun, Q., Zheng, X., Liu, W., Tang, X., & Xiong, Z. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121262 · Cited by 57
Ain, Q. U., Rasheed, U., Muhammad, Y., Zhang, H., He, R., & Tong, Z. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.145929 · Cited by 57
Chen, X., Liu, L., Luo, Z., Shen, J., Ni, Q., & Yao, J. (2018) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2018.02.009 · Cited by 56
Self-citationZhai, R., Hu, J., Chen, X., Xu, Z., Wen, Z., & Jin, M. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123846 · Cited by 57
Self-citationSmart and regeneratable Xanthan gum hydrogel adsorbents for selective removal of cationic dyes
Njuguna, D. G., & Schönherr, H. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.107620 · Cited by 56
Yu, Y., Shi, X., Liu, L., & Yao, J. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05441-5 · Cited by 55
Self-citationSelective adsorption of anionic dyes by a macropore magnetic lignin-chitosan adsorbent
Wang, H., Chen, C., Dai, K., Xiang, H., Kou, J., Guo, H. J., Ying, H., Chen, X., & Wu, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131955 · Cited by 62
Self-citationYadav, M., Das, M., Savani, C., Thakore, S. I., & Jadeja, R. N. (2019) · ACS Omega · doi:10.1021/acsomega.9b00881 · Cited by 55
Liu, A., Liu, J., He, S., Zhang, J., & Shao, W. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.11.321 · Cited by 54
He, J., Dai, J., Zhang, T., Sun, J., Xie, A., Tian, S., Yan, Y., & Huo, P. (2016) · RSC Advances · doi:10.1039/c6ra00277c · Cited by 53
Lin, F., You, Y., Yang, X., Jiang, X. Y., Lu, Q., Wang, T., Huang, B., & Lu, B. (2017) · Cellulose · doi:10.1007/s10570-017-1473-9 · Cited by 54
“8c) (Liu et al. 2015).”
BackgroundMethodInfluentialLiu, Z., Chen, G., Hu, F., & Li, X. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.110377 · Cited by 53
Flower-Shaped Ni/Co MOF with the Highest Adsorption Capacity for Reactive Dyes
Si, J., Zhang, S., Liu, X., & Fang, K. (2022) · Langmuir · doi:10.1021/acs.langmuir.2c00184 · Cited by 54
Cheng, J., Gu, J. J., Wei, T., Wang, P., Liu, L., Wang, C., Li, Y.-K., Feng, X., Qiu, G., & Cao, F. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.122149 · Cited by 52
Self-citationJia, S., Tang, D., Peng, J., Yang, X., & Sun, Z. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124472 · Cited by 52
Fabrication of N, P-codoped reduced graphene oxide and its application for organic dye removal
Wu, Y., Yang, F., Liu, X., Tan, G., & Xiao, D. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.10.118 · Cited by 51
Effective removal of cation dyes from aqueous solution using robust cellulose sponge
Ma, M., Chen, Y., Zhao, X. X., Tan, F., Wang, Y., Cao, Y., & Cai, W. (2020) · Journal of Saudi Chemical Society · doi:10.1016/j.jscs.2020.09.008 · Cited by 51
“It is well known that the adsorption efficiency was usually determined by various factors, including surface structure of the adsorbent, adsorption conditions and electrostatic attraction [31,44].”
Esmaeili, Z., Izadyar, S., Hamzeh, Y., & Abdulkhani, A. (2021) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.0c00872 · Cited by 51
Pal, A., Giri, A., & Bandyopadhyay, A. (2016) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2016.02.034 · Cited by 50
Wang, Y., Zhang, C., Zhao, L., Meng, G., Wu, J., & Liu, Z. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-6956-7 · Cited by 50
Abbaz, A., Arris, S., Viscusi, G., Ayat, A., Aissaoui, H., & Boumezough, Y. (2023) · Gels · doi:10.3390/gels9110916 · Cited by 54
“…Waals forces and Non-covalent, weak interactions such as van der Waals forces and π - π interaction are established between aromatic rings of safranin O dyes and hemicellulose, lignin, cellulose [103]. established between aromatic rings of safranin O dyes and hemicellulose, lignin, cellulose [103].”
BackgroundKumari, S., Chowdhry, J., Choudhury, A., Agarwal, S., Narad, P., & Garg, M. C. (2024) · Environmental Science and Pollution Research · doi:10.1007/s11356-024-31826-z · Cited by 53
“Extended author information available on the last page of the article ecosystems (Grassi et al. 2020; Liu et al. 2015), the triphenyl-methane crystal violet (CV) (C 25 N 3 H 30 Cl) is more poisonous than negative dyes (Essandoh et al. 2021).”
Hoang, M. T., Pham, T. D., Pham, T. T., Nguyen, T. H., Nu, D. T. T., Nguyen, T. H., Bartling, S., & der Bruggen, B. V. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-07623-9 · Cited by 49
Hegazy, S., Ibrahim, H. H., Weckman, T., Hu, T., Tuomikoski, S., Lassi, U., Honkala, K., & Srivastava, V. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.158654 · Cited by 48
Al-Labadi, I. G., Horváth, M., Zaidalkilani, A. T., Al-Ma’abreh, A. M., Bashir, M. J. K., Keshta, B. E., Hanbali, G., Zoubi, W. A., Abukhadra, M. R., Alqhtani, H. A., et al. (2025) · Frontiers in Water · doi:10.3389/frwa.2025.1612232 · Cited by 48
“LC is also ranked as the third largest energy source globally (Liu et al., 2015; Abi Bianasari et al., 2024; Uddin et al., 2024).”
Zheng, Y., Wang, H., Cheng, B., You, W., & Yu, J. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.04.050 · Cited by 48
Efficient and Enhanced Adsorption of Methylene Blue on Triethanolamine-Modified Graphene Oxide
Xu, J., Li, S., Wang, F., Yang, Z., & Liu, H. (2019) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.9b00022 · Cited by 49
Tahazadeh, S., Karimi, H., Mohammadi, T., Emrooz, H. B. M., & Tofighy, M. A. (2021) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2021.122180 · Cited by 48
Ren, P., Ren, X., Xu, J., Li, H., Zheng, Y., Hong, Y., Lin, Y. P., Zhou, Y., Chen, Y., & Zhang, W. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.153699 · Cited by 50
Zhang, M., Mao, Y., Wang, W., Yang, S., Song, Z., & Zhao, X. (2016) · RSC Advances · doi:10.1039/c6ra08939a · Cited by 48
Zhang, P., He, T., Chen, H., Li, P., Xiang, M., Ding, N., & Deng, S. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.04.122 · Cited by 47
Yang, F., & Yang, P. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100669 · Cited by 48
Zhang, Y., Li, Y., Wang, M., Chen, B., Sun, Y., Chen, K., Du, Q., Pi, X., & Wang, Y. (2022) · Nanomaterials · doi:10.3390/nano12152533 · Cited by 46
“The degree of ionization of the dye and the surface charge of the adsorbent will change with the pH value [44].”
BackgroundQiu, J., Fan, P., Feng, Y., Liu, F., Ling, C., & Li, A. (2019) · Environmental Pollution · doi:10.1016/j.envpol.2019.113117 · Cited by 46
Bai, W., Yang, X., Du, X., Qian, Z., Zhang, Y., Liu, L., & Yao, J. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.144179 · Cited by 46
Self-citationGao, B., Chang, Q., Cai, J., Xi, Z., Li, A., & Yang, H. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123603 · Cited by 46
A Review on Nanocellulose and Superhydrophobic Features for Advanced Water Treatment
Iqbal, D., Zhao, Y., Zhao, R., Russell, S. J., & Ning, X. (2022) · Polymers · doi:10.3390/polym14122343 · Cited by 47
Boukind, S., Bouaouina, J., Bouras, H., Benhamou, A. A., Ablouh, E., Kassab, Z., Khouloud, M., Achaby, M. E., & Sehaqui, H. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.08.009 · Cited by 45
Metadata
- Authors
- Liu, L., Gao, Z. Y., Su, X. P., Chen, X., Jiang, L., & Yao, J. M.
- Affiliations
- Zhejiang Sci-Tech University (CN)
- The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou 310018, China
- ORCID
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-02-16
- Volume
- 3
- Issue
- 3
- Pages
- 432-442
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2312192317
- Cited by
- 580
- References
- 55
- Citations by year
- 2026: 30 · 2025: 35 · 2024: 37 · 2023: 62 · 2022: 77 · 2021: 86 · 2020: 62 · 2019: 56 · 2018: 53 · 2017: 42 · 2016: 33 · 2015: 7
- FWCI
- 29.80
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Sustainable Chemistry & Engineering (publishedVersion)
- Funders
- Zhejiang Province (2013YXQN06)
- National Natural Science Foundation of China (51303159)
- Natural Science Foundation of Zhejiang Province (LQ13E030008)
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Materials Science › Polymers and Plastics › Dyeing and Modifying Textile Fibers
- Physical Sciences › Environmental Science › Water Science and Technology › Coagulation and Flocculation Studies
- Keywords
- dye adsorption, methylene blue, binary dye solutions, acrylic acid grafting, acrylamide grafting, textile wastewater treatment, adsorption isotherms, adsorption kinetics, electrostatic interactions, adsorbent reusability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.