CoChat

Adsorption Removal of Dyes from Single and Binary Solutions Using a Cellulose-based Bioadsorbent

Liu, Lin, Gao, Zhang Yun, Su, Xiu Ping, Chen, Xing, Jiang, Li, Yao, Ju Ming · 2015 · ACS Sustainable Chemistry & Engineering

The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.

Abstract

A high efficiency and eco-friendly porous cellulose-based bioadsorbent was synthesized by grafting acrylic acid and acrylamide to remove anionic dye acid blue 93 (AB93) and cationic dye methylene blue (MB) from single and binary dye solutions. The effects of initial dye concentration, bioadsorbent dosage, contact time, solution pH value, temperature, ionic strength and surfactant content on the adsorption capacity of the bioadsorbent were investigated. The maximum adsorption capacities of the bioadsorbent for both AB93 and MB were 1372 mg g –1 at an initial concentration of 2500 mg L –1 . The conditions-dependent adsorption characteristics of the bioadsorbent indicated a high efficiency of dyes removal. The appropriate isotherm model for the equilibrium process was the Freundlich, and the kinetic studies revealed that the adsorption of AB93 and MB followed the pseudo-second-order kinetic models. The adsorbent behaviors were dominated by the electrostatic interactions between the bioadsorbents and the dye molecules. Moreover, the recyclability experiments showed that the bioadsorbent could be reused for at least three cycles with stable adsorption capacity even in complex systems containing binary-dyes, salt, and surfactant. Thus, the cellulose-based bioadsorbent can be effectively used for the removal of dyes from industrial textile wastewater.

Overview

Integrity signals

Registry

Crossref · 10.1021/sc500848m

Cites

55 of 55 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 55 references

Research works printed but not linked: 1

  1. Liang X. Y., 2013, BioResources, 8, 130

Cited by

Items 501–587 of 587

Metadata

Authors
Liu, L., Gao, Z. Y., Su, X. P., Chen, X., Jiang, L., & Yao, J. M.
Affiliations
  • Zhejiang Sci-Tech University (CN)
  • The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou 310018, China
Venue
ACS Sustainable Chemistry & Engineering
Published
2015-02-16
Volume
3
Issue
3
Pages
432-442
ISSN
2168-0485 (ISSN-L)
OpenAlex
W2312192317
Cited by
580
References
55
Citations by year
2026: 30 · 2025: 35 · 2024: 37 · 2023: 62 · 2022: 77 · 2021: 86 · 2020: 62 · 2019: 56 · 2018: 53 · 2017: 42 · 2016: 33 · 2015: 7
FWCI
29.80
Type
journal article
Language
en
Open access
closed
Locations
ACS Sustainable Chemistry & Engineering (publishedVersion)
Funders
  • Zhejiang Province (2013YXQN06)
  • National Natural Science Foundation of China (51303159)
  • Natural Science Foundation of Zhejiang Province (LQ13E030008)
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Materials Science › Polymers and Plastics › Dyeing and Modifying Textile Fibers
  • Physical Sciences › Environmental Science › Water Science and Technology › Coagulation and Flocculation Studies
Keywords
dye adsorption, methylene blue, binary dye solutions, acrylic acid grafting, acrylamide grafting, textile wastewater treatment, adsorption isotherms, adsorption kinetics, electrostatic interactions, adsorbent reusability

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.