The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Modeling mountain building and the seismic cycle in the Himalaya of Nepal
Open accessAbstract
A host of information is now available regarding the geological and thermal structure as well as deformation rate across the Himalaya of central Nepal. These data are reconciled in a two‐dimensional mechanical model that incorporates the rheological layering of the crust which depends on the local temperature and surface processes. Over geological timescale (5 Ma) the ∼20 mm/yr estimated shortening rate across the range is accommodated by localized thrust faulting along the Main Himalayan Thrust fault (MHT). The MHT reaches the surface along the foothills, where it is called the Main Frontal Thrust fault (MFT). The MHT flattens beneath the Lesser Himalaya and forms a midcrustal ramp at the front of the Higher Himalaya, consistent with the river incision and the anticlinal structure of the Lesser Himalaya. Farther northward the MHT roots into a subhorizontal shear zone that coincides with a midcrustal seismic reflector. Aseismic slip along this shear zone is accommodated in the interseismic period by elastic straining of the upper crust, increasing the Coulomb stress beneath the front of the Higher Himalaya, where most of the microseismic activity clusters. Negligible deformation of the hanging wall requires a low apparent friction coefficient (μ) less than ∼0.3 on the flat portion of the MHT. On the ramp, μ might be as high as 0.6. Sensitivity tests show that a rather compliant, quartz‐rich rheology and a high radioactive heat production in the upper crust of ∼2.5 μW/m 3 is required. Erosion affects the thermal structure and interplays with crustal deformation. A dynamic equilibrium is obtained in which erosion balances tectonic uplift maintaining steady state thermal structure, topography, and deformation field. Using a linear diffusion model of erosion, we constrain the value of the mass diffusivity coefficient to 0.5–1.6×l0 4 m 2/yr. This study demonstrates that the data are internally consistent and compatible with current understanding of the mechanics of crustal deformation and highlight the role of viscous flow in the lower crust and of surface erosion in orogeny processes on the long term as well as during interseismic period.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The effective elastic thickness (Te) of continental lithosphere: What does it really mean?
Burov, E. B., & Diament, M. (1995) · Journal of Geophysical Research: Solid Earth · doi:10.1029/94jb02770 · Cited by 805
Rheology of the lithosphere: Selected topics
Kirby, S. H., & Kronenberg, A. K. (1987) · Reviews of Geophysics · doi:10.1029/rg025i006p01219 · Cited by 695
Kinematics of the India‐Eurasia collision zone from GPS measurements
Larson, K. M., Bürgmann, R., Bilham, R., & Freymueller, J. T. (1999) · Journal of Geophysical Research: Solid Earth · doi:10.1029/1998jb900043 · Cited by 381
Study of plate deformation and stress in subduction processes using two-dimensional numerical models
Hassani, R., Jongmans, D., & Chéry, J. (1997) · Journal of Geophysical Research: Solid Earth · doi:10.1029/97jb01354 · Cited by 196
The steady state thermal structure of eroding orogenic belts and accretionary prisms
Royden, L. H. (1993) · Journal of Geophysical Research: Solid Earth · doi:10.1029/92jb01954 · Cited by 162
Cited by
Expression of active tectonics in erosional landscapes
Kirby, E., & Whipple, K. X. (2012) · Journal of Structural Geology · doi:10.1016/j.jsg.2012.07.009 · Cited by 1,093
Fluvial incision and tectonic uplift across the Himalayas of central Nepal
Lavé, J., & Avouac, J. P. (2001) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2001jb000359 · Cited by 835
Self-citationKapp, P., & DeCelles, P. G. (2019) · American Journal of Science · doi:10.2475/03.2019.01 · Cited by 755
Perfettini, H., & Avouac, J. ‐. (2004) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2003jb002488 · Cited by 488
Self-citationFrom Geodetic Imaging of Seismic and Aseismic Fault Slip to Dynamic Modeling of the Seismic Cycle
Avouac, J.-P. (2015) · Annual Review of Earth and Planetary Sciences · doi:10.1146/annurev-earth-060614-105302 · Cited by 419
Self-citation
Metadata
- Authors
- Cattin, R., & Avouac, J. P.
- Venue
- Journal of Geophysical Research: Solid Earth
- Publisher
- American Geophysical Union (AGU)
- Published
- 2000-06-10
- Volume
- 105
- Issue
- B6
- Pages
- 13389-13407
- ISSN
- 0148-0227 (ISSN-L)
- OpenAlex
- W2028235617
- Cited by
- 363
- References
- 5
- FWCI
- 5.00
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling mountain building and the seismic cycle in the Himalaya of Nepal. https://app.cochat.ai/papers/10.1029/2000jb900032
- The paper
- Cattin, R., & Avouac, J. P. (2000). Modeling mountain building and the seismic cycle in the Himalaya of Nepal. Journal of Geophysical Research: Solid Earth. https://doi.org/10.1029/2000jb900032
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.