Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 172

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Heat flow from a scientific research well at Cajon Pass, California

Sass, J. H., Lachenbruch, Arthur H., Moses, T. H., Morgan, Paul · 1992 · Journal of Geophysical Research: Solid Earth

Abstract

The long‐standing “stress/heat flow paradox” was the primary scientific motivation for the Cajon Pass borehole. For nearly two decades, the absence of a fault‐centered heat flow anomaly from measurements to relatively shallow (∼200 m) depths had indicated low average shear stresses (≤20 MPa) on the San Andreas fault, while laboratory data on rock strength and in situ stress determinations to about a kilometer had indicated high stress (∼100 MPa). Initial results from an unsuccessful 1.7‐km‐deep oil well at the site gave a high heat flow (∼90 mW m−2) consistent with a strong San Andreas fault; however, the late Cenozoic geologic history of the Cajon Pass area suggested that the anomalous heat flow was the transient effect of rapid erosion. Theoretical studies predicted that the ∼30% surface anomaly would be substantially reduced at depths of 3–5 km. The research borehole reached a total depth of 3.5 km. Below a superficial covering of Tertiary sedimentary rocks, it penetrated gneissic rocks with composition ranging from gabbroic to granodioritic. Core recovery amounted to only about 3% of the total depth, necessitating the use of drill cuttings to characterize thermal conductivity. This, in turn, resulted in much higher uncertainties in average conductivity (±10–15%) than would have occurred with a continuously cored hole (±3–5%). From a time series of temperature logs, equilibrium temperature gradients were established over selected intervals of 250–500 m to within 95% confidence limits of 2%. These gradients were combined with harmonic mean thermal conductivities having larger uncertainties to give interval heat flows, which vary systematically from 100 ± 5 mW m−2 in the uppermost 400 m to 75 ± 3 mW m−2 in the lowermost 300 m. Thus, at the Cajon Pass site, heat flow is decreasing with depth at a mean rate of more than 7 mW m−2 per kilometer, consistent with a frictionless fault and with theoretical predictions based on local erosional history.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1029/91jb01504

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 172

Metadata

Authors
Sass, J. H., Lachenbruch, A. H., Moses, T. H., & Morgan, P.
Venue
Journal of Geophysical Research: Solid Earth
Published
1992-04-10
Volume
97
Issue
B4
Pages
5017-5030
ISSN
0148-0227 (ISSN-L)
OpenAlex
W1976870970
Cited by
172
References
1
FWCI
4.42
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.