The DOI matches its Crossref record.
Preparation and deformation of synthetic aggregates of quartz
Abstract
Synthetic quartz aggregates of low porosity have been fabricated from natural quartz powder, impure silica gel, and high‐purity silicic acid by hydrothermal isostatic pressing at 300 MPa. The resulting specimens have water contents comparable to those of natural quartzites and have been used for deformation tests. The flow stress at 1200–1300 K was found to vary in an inverse relationship to the water pressure estimated under the assumption that the measured water content homogeneously filled the measured porosity. It is questionable that the natural‐quartz‐origin specimens were fully equilibrated in respect to the activity of the water, but equilibration has probably been achieved in the amorphous‐silica‐origin specimens, which crystallized under the experimental conditions. In the deformation of the latter materials, the experimental activation energy at water pressures approaching the confining pressure was found to be about 150 kJ mol−1 for both. However, the impure gel‐origin material gave a stress exponent of about 2.3, whereas the high‐purity silicic‐acid‐origin material gave a stress exponent of about 4, in spite of the grain sizes being about 90μm and 20 μm, respectively. It is concluded that while the impure specimens have higher intragranular strengths, there is also a significant contribution of grain boundary processes to the strain in them which is absent in the high‐purity specimens.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Strength of the lithosphere: Constraints imposed by laboratory experiments
Kohlstedt, D. L., Evans, B., & Mackwell, S. J. (1995) · Journal of Geophysical Research: Solid Earth · doi:10.1029/95jb01460 · Cited by 1,603
Bürgmann, R., & Dresen, G. (2008) · Annual Review of Earth and Planetary Sciences · doi:10.1146/annurev.earth.36.031207.124326 · Cited by 1,150
A flow law for dislocation creep of quartz aggregates determined with the molten salt cell
Gleason, G. C., & Tullis, J. (1995) · Tectonophysics · doi:10.1016/0040-1951(95)00011-b · Cited by 575
Dynamic recrystallization of quartz: correlation between natural and experimental conditions
Stipp, M., Stünitz, H., Heilbronner, R., & Schmid, S. M. (2002) · Geological Society, London, Special Publications · doi:10.1144/gsl.sp.2001.200.01.11 · Cited by 527
Law, R. D. (2014) · Journal of Structural Geology · doi:10.1016/j.jsg.2014.05.023 · Cited by 420
Dynamics of the India‐Eurasia collision zone
Flesch, L. M., Haines, A. J., & Holt, W. E. (2001) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2001jb000208 · Cited by 328
Bos, B., & Spiers, C. J. (2002) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2001jb000301 · Cited by 306
Metadata
- Authors
- Luan, F. C., & Paterson, M. S.
- Venue
- Journal of Geophysical Research: Solid Earth
- Publisher
- American Geophysical Union (AGU)
- Published
- 1992-01-10
- Volume
- 97
- Issue
- B1
- Pages
- 301-320
- ISSN
- 0148-0227 (ISSN-L)
- OpenAlex
- W2089827603
- Cited by
- 175
- References
- 0
- FWCI
- 2.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.