The DOI matches its Crossref record.
Monte Carlo studies of sampling strategies for estimating tributary loads
Abstract
Monte Carlo techniques were used to evaluate the accuracy and precision of tributary load estimates, as these are affected by sampling frequency and pattern, calculation method, watershed size, and parameter behavior during storm runoff events. Simulated years consisting of 1460 observations were chosen at random with replacement from data sets of more than 4000 samples. Patterned subsampling of these simulated years produced data appropriate to each sampling frequency and pattern, from which load estimates were calculated. Thus results for all sampling strategies were based on the same series of simulated years. Sampling frequencies ranged from 12 to roughly 600 samples per year. Unstratified and flow‐stratified sampling were examined, and loads were calculated with and without the use of the Beale Ratio Estimator. All loads were evaluated by comparison with loads calculated from all 1460 samples in the simulated year. Studies consisting of 1000 iterations were repeated twice for each of five parameters in each of three watersheds. The results show that bias and precision of loading estimates are affected not only by the frequency and pattern of sampling and the calculation approach used, but also by the watershed size and the behavior of the chemical species being monitored. Furthermore, considerable interaction exists between these factors. In every case, loads based on flow‐stratified sampling and calculated using the Beale ratio estimator provided the best results among the strategies examined. Differences in bias and precision among watersheds and among transported materials are related to the variability of instantaneous fluxes in the systems being monitored. These differences are qualitatively predictable from knowledge of the time behavior of the material and hydrological systems involved. Attempts to derive quantitative relationships to predict the sampling effort required to achieve a specified level of precision have not been successful.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wildfire effects on water quality in forest catchments: A review with implications for water supply
Smith, H. G., Sheridan, G. J., Lane, P. N. J., Nyman, P., & Haydon, S. (2011) · Journal of Hydrology · doi:10.1016/j.jhydrol.2010.10.043 · Cited by 752
Cohn, T. A., Delong, L. L., Gilroy, E. J., Hirsch, R. M., & Wells, D. K. (1989) · Water Resources Research · doi:10.1029/wr025i005p00937 · Cited by 501
Mayer, B., Boyer, E. W., Goodale, C., Jaworski, N. A., van Breemen, N., Howarth, R. W., Seitzinger, S., Billen, G., Lajtha, K., Nadelhoffer, K., et al. (2002) · Biogeochemistry · doi:10.1023/a:1015744002496 · Cited by 479
Cohn, T. A., Caulder, D. L., Gilroy, E. J., Zynjuk, L. D., & Summers, R. M. (1992) · Water Resources Research · doi:10.1029/92wr01008 · Cited by 435
Performance and uncertainties of TSS stormwater sampling strategies from online time series
Sandoval, S., Bertrand-Krajewski, J.-L., Caradot, N., Hofer, T., & Gruber, G. (2018) · Water Science and Technology · doi:10.2166/wst.2018.415 · Cited by 10
Metadata
- Authors
- Richards, R. P., & Holloway, J.
- Venue
- Water Resources Research
- Publisher
- American Geophysical Union (AGU)
- Published
- 1987-10
- Volume
- 23
- Issue
- 10
- Pages
- 1939-1948
- ISSN
- 0043-1397 (ISSN-L)
- 1944-7973
- OpenAlex
- W2116304421
- Cited by
- 170
- References
- 0
- FWCI
- 10.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Monte Carlo studies of sampling strategies for estimating tributary loads. https://app.cochat.ai/papers/10.1029/wr023i010p01939
- The paper
- Richards, R. P., & Holloway, J. (1987). Monte Carlo studies of sampling strategies for estimating tributary loads. Water Resources Research. https://doi.org/10.1029/wr023i010p01939
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.