The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
The design and applications of superomniphobic surfaces
Open accessAbstract
Surfaces that display contact angles >150° along with low contact angle hysteresis with essentially all high and low surface tension liquids, including water, oils and alcohols, are known as superomniphobic surfaces. Such surfaces have a range of commercial applications, including self-cleaning, non-fouling, stain-free clothing, drag reduction, corrosion prevention and separation of liquids. Such surfaces have thus generated immense academic and industrial interest in recent years. In this review, we discuss the systematic design of superomniphobic surfaces. In particular, we discuss the significance of surface energy, roughness and the critical role of re-entrant texture in obtaining the so-called Cassie–Baxter state with low surface tension liquids. We also discuss how hierarchical scales of texture can yield high contact angles and decrease the contact angle hysteresis of superomniphobic surfaces by reducing the solid–liquid contact area. On the basis of this understanding, we discuss dimensionless design parameters that allow for the systematic design of superomniphobic surfaces. We also review the current literature on superomniphobic surfaces, paying particular attention to surfaces that demonstrate good mechanical, chemical and radiation durability—traits that are essential for any commercial application of superomniphobic surfaces. Finally, we conclude by identifying the unresolved challenges in the fabrication of durable superomniphobic surfaces and highlight the future needs in the field. Surfaces that display contact angles >150° along with a low contact angle hysteresis for both low and high surface tension liquids are known as superomniphobic surfaces. Such surfaces have several applications, including self-cleaning, non-fouling, stain-free clothing, drag reduction, corrosion prevention and separation of liquids. In this review, we discuss the design criteria, recent studies, applications, challenges and potential of superomniphobic surfaces. Surfaces that strongly repel low surface tension liquids (e.g. oils and alcohols) are classified as superoleophobic and those that strongly repel high surface tension liquids (e.g. water) are classified as superhydrophobic. However, if a surface shows both these characteristics, it can be considered superomniphobic. Liquid droplets on superomniphobic surfaces roll off very easily and, as a result, these surfaces are attractive as non-fouling coatings, self-cleaning surfaces and liquid-separation techniques. Anish Tuteja at the University of Michigan, United States, and colleagues review the design principles required to fabricate superomniphobic surfaces. They discuss surface energy, roughness and hierarchical scales of surface texture, and recognize the importance of re-entrant textures (i.e. convex topography) to achieve superomniphobicity. Several examples of superomniphobic surfaces are presented with particular focus on the need to improve chemical and mechanical durability, to realize their full potential in commercial and industrial applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Purity of the sacred lotus, or escape from contamination in biological surfaces
Barthlott, W., & Neinhuis, C. (1997) · Planta · doi:10.1007/s004250050096 · Cited by 6,860
III. An essay on the cohesion of fluids
Young, T. (1805) · Philosophical Transactions of the Royal Society of London · doi:10.1098/rstl.1805.0005 · Cited by 6,643
White, F. M. (1974) · Cited by 5,899
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity
Wong, T.-S., Kang, S. H., Tang, S. K. Y., Smythe, E. J., Hatton, B. D., Grinthal, A., & Aizenberg, J. (2011) · Nature · doi:10.1038/nature10447 · Cited by 4,134
Lafuma, A., & Quéré, D. (2003) · Nature Materials · doi:10.1038/nmat924 · Cited by 3,315
Designing Superoleophobic Surfaces
Tuteja, A., Choi, W., Ma, M., Mabry, J. M., Mazzella, S. A., Rutledge, G. C., McKinley, G. H., & Cohen, R. E. (2007) · Science · doi:10.1126/science.1148326 · Cited by 3,006
Self-citationCharacterization and Distribution of Water-repellent, Self-cleaning Plant Surfaces
NEINHUIS, C. (1997) · Annals of Botany · doi:10.1006/anbo.1997.0400 · Cited by 2,848
Adhesive force of a single gecko foot-hair
Autumn, K., Liang, Y. A., Hsieh, S. T., Zesch, W., Chan, W. P., Kenny, T. W., Fearing, R., & Full, R. J. (2000) · Nature · doi:10.1038/35015073 · Cited by 2,758
Cited by
Bioinspired Interfaces with Superwettability: From Materials to Chemistry
Su, B., Tian, Y., & Jiang, L. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b12728 · Cited by 1,159
Yong, J., Chen, F., Yang, Q., Huo, J., & Hou, X. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00751a · Cited by 810
Robust superhydrophobicity: mechanisms and strategies
Zhang, W., Wang, D., Sun, Z., Song, J., & Deng, X. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00751j · Cited by 686
Superhydrophobic nanocoatings: from materials to fabrications and to applications
Si, Y., & Guo, Z. (2015) · Nanoscale · doi:10.1039/c4nr07554d · Cited by 380
Robust and durable liquid-repellent surfaces
Chen, F., Wang, Y., Tian, Y., Zhang, D., Song, J., Crick, C. R., Carmalt, C. J., Parkin, I. P., & Lu, Y. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01033b · Cited by 378
Environmental Applications of Interfacial Materials with Special Wettability
Wang, Z., Elimelech, M., & Lin, S. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b04351 · Cited by 352
Wang, Z., & Lin, S. (2017) · Water Research · doi:10.1016/j.watres.2017.01.022 · Cited by 323
Specially Wettable Membranes for Oil–Water Separation
Wei, Y., Qi, H., Gong, X., & Zhao, S. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800576 · Cited by 304
Design of omniphobic interfaces for membrane distillation – A review
Lu, K. J., Chen, Y., & Chung, T.-S. (2019) · Water Research · doi:10.1016/j.watres.2019.06.056 · Cited by 304
Durable superhydrophobic and superamphiphobic polymeric surfaces and their applications: A review
Ellinas, K., Tserepi, A., & Gogolides, E. (2017) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.09.003 · Cited by 295
Novel Janus Membrane for Membrane Distillation with Simultaneous Fouling and Wetting Resistance
Huang, Y.-X., Wang, Z., Jin, J., & Lin, S. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b02848 · Cited by 295
Directional liquid dynamics of interfaces with superwettability
Dai, H., Dong, Z., & Jiang, L. (2020) · Science Advances · doi:10.1126/sciadv.abb5528 · Cited by 273
The springtail cuticle as a blueprint for omniphobic surfaces
Hensel, R., Neinhuis, C., & Werner, C. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00438a · Cited by 259
Arzt, E., Quan, H., McMeeking, R. M., & Hensel, R. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100823 · Cited by 253
Metadata
- Authors
- Kota, A. K., Kwon, G., & Tuteja, A.
- Venue
- NPG Asia Materials
- Published
- 2014-07
- Volume
- 6
- Issue
- 7
- Pages
- e109-e109
- ISSN
- 1884-4049 (ISSN-L)
- 1884-4057
- OpenAlex
- W2012540519
- Cited by
- 426
- References
- 81
- FWCI
- 11.37
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.