CoChat

Superaerophobic graphene nano-hills for direct hydrazine fuel cells

Open access
Akbar, Kamran, Kim, Jung Hwa, Lee, Zonghoon, Kim, Minsoo, Yi, Yeonjin, Chun, Seung-Hyun · 2017 · NPG Asia Materials
Cited by 74

The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.

Abstract

Hydrazine fuel-cell technology holds great promise for clean energy, not only because of the greater energy density of hydrazine compared to hydrogen but also due to its safer handling owing to its liquid state. However, current technologies involve the use of precious metals (such as platinum) for hydrazine oxidation, which hinders the further application of hydrazine fuel-cell technologies. In addition, little attention has been devoted to the management of gas, which tends to become stuck on the surface of the electrode, producing overall poor electrode efficiencies. In this study, we utilized a nano-hill morphology of vertical graphene, which efficiently resolves the issue of the accumulation of gas bubbles on the electrode surface by providing a nano-rough-edged surface that acts as a superaerophobic electrode. The growth of the vertical graphene nano-hills was achieved and optimized by a scalable plasma-enhanced chemical vapor deposition method. The resulting metal-free graphene-based electrode showed the lowest onset potential (−0.42 V vs saturated calomel electrode) and the highest current density of all the carbon-based materials reported previously for hydrazine oxidation. Graphene electrodes can eliminate bubbles and hence boost the performance of high-energy-density fuel cells based on hydrazine. Conventional fuel cells generate electricity by oxidizing hydrogen, but the inorganic alkaline liquid hydrazine (N2H4) promises higher energy densities and is thus being considered for new types of fuel cells. However, oxidization of hydrazine creates nitrogen which builds up as bubbles on the electrode and reduces the reaction efficiency. Now, Seung-Hyun Chun of Sejong University in Korea and co-workers have shown that the nanostructured surface of a vertical graphene electrode prevents these reaction-blocking bubbles from forming due to its ‘superaerophobic’ nature. By exploiting this effect, they created a hydrazine fuel cell that has the highest current density yet attained using a carbon-based material. The researchers anticipate that nanorough surfaces could be used in other electrocatalytic applications. Nano-rough surface offered by vertical graphene with nano-hill type morphology of corresponding peaks and valleys. These nano-hills result in the formation of smaller sized nitrogen bubbles when utilized for the oxidation of hydrazine. Due to their low adhesion force on the electrode surface, these bubbles leave the surface quickly and hence render the superaerophobic property to vertical graphene nano-hills.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/am.2017.55

Cites

5 of 5 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 74

Metadata

Authors
Akbar, K., Kim, J. H., Lee, Z., Kim, M., Yi, Y., & Chun, S.-H.
Venue
NPG Asia Materials
Published
2017-05
Volume
9
Issue
5
Pages
e378-e378
ISSN
  • 1884-4049 (ISSN-L)
  • 1884-4057
OpenAlex
W2614434665
Cited by
74
References
5
FWCI
2.06
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.