The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Simultaneous additive and subtractive three-dimensional nanofabrication using integrated two-photon polymerization and multiphoton ablation
Open accessAbstract
Modern three-dimensional nanofabrication requires both additive and subtractive processes. However, both processes are largely isolated and generally regarded as incompatible with each other. In this study, we developed simultaneous additive and subtractive fabrication processes using two-photon polymerization followed by femtosecond (fs) laser multiphoton ablation. To demonstrate the new capability, submicrometer polymer fibers containing periodic holes of 500-nm diameter and microfluidic channels of 1-µm diameter were successfully fabricated. This method combining both two-photon polymerization and fs laser ablation improves the nanofabrication efficiency and enables the fabrication of complex three-dimensional micro-/nanostructures, promising for a wide range of applications in integrated optics, microfluidics and microelectromechanical systems. An international team of researchers has combined two well-known fabrication techniques to produce intricate three-dimensional nanostructures. Yong Fen Lu and co-workers say that their novel approach could be used to make nanosized devices that are difficult to produce through either technique alone. Both techniques employ a femtosecond laser. The first — two-photon polymerization—is used to ‘draw’ 3D structures in a photocurable polymer. The second—femtosecond laser multiphoton ablation—is used to cut voids, such as channels, in the polymer. Combining these two techniques enables the efficient fabrication of complex three-dimensional nanostructures, such as integrated optical circuits and lab-on-a-chip devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Three-dimensional optical storage inside transparent materials
Glezer, E. N., Milosavljevic, M., Huang, L., Finlay, R. J., Her, T.-H., Callan, J. P., & Mazur, E. (1996) · Optics Letters · doi:10.1364/ol.21.002023 · Cited by 985
Complex micromachines produced and driven by light
Galajda, P., & Ormos, P. (2001) · Applied Physics Letters · doi:10.1063/1.1339258 · Cited by 565
Recent progress in multiphoton microfabrication
Maruo, S., & Fourkas, J. T. (2008) · Laser & Photonics Reviews · doi:10.1002/lpor.200710039 · Cited by 390
Cited by
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Femtosecond laser three-dimensional micro- and nanofabrication
Sugioka, K., & Cheng, Y. (2014) · Applied Physics Reviews · doi:10.1063/1.4904320 · Cited by 490
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Triplet fusion upconversion nanocapsules for volumetric 3D printing
Sanders, S. N., Schloemer, T. H., Gangishetty, M. K., Anderson, D., Seitz, M., Gallegos, A. O., Stokes, R. C., & Congreve, D. N. (2022) · Nature · doi:10.1038/s41586-022-04485-8 · Cited by 269
Nanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
Metadata
- Authors
- Xiong, W., Zhou, Y. S., He, X. N., Gao, Y., Mahjouri-Samani, M., Jiang, L., Baldacchini, T., & Lu, Y. F.
- Venue
- Light: Science & Applications
- Published
- 2012-04-13
- Volume
- 1
- Issue
- 4
- Pages
- e6-e6
- ISSN
- 2047-7538 (ISSN-L)
- OpenAlex
- W2055199567
- Cited by
- 182
- References
- 3
- FWCI
- 21.29
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Simultaneous additive and subtractive three-dimensional nanofabrication using integrated two-photon polymerization and multiphoton ablation. https://app.cochat.ai/papers/10.1038/lsa.2012.6
- The paper
- Xiong, W., Zhou, Y. S., He, X. N., Gao, Y., Mahjouri-Samani, M., Jiang, L., Baldacchini, T., & Lu, Y. F. (2012). Simultaneous additive and subtractive three-dimensional nanofabrication using integrated two-photon polymerization and multiphoton ablation. Light: Science & Applications. https://doi.org/10.1038/lsa.2012.6
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.