Rapid synthesis of transition metal dichalcogenide–carbon aerogel composites for supercapacitor electrodes
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Transition metal dichalcogenide (TMD) materials have recently demonstrated exceptional supercapacitor properties after conversion to a metallic phase, which increases the conductivity of the network. However, freestanding, exfoliated transition metal dichalcogenide films exhibit surface areas far below their theoretical maximum (1.2 %), can fail during electrochemical operation due to poor mechanical properties, and often require pyrophoric chemicals to process. On the other hand, pyrolyzed carbon aerogels exhibit extraordinary specific surface areas for double layer capacitance, high conductivity, and a strong mechanical network of covalent chemical bonds. In this paper, we demonstrate the scalable, rapid nanomanufacturing of TMD (MoS 2 and WS 2) and carbon aerogel composites, favoring liquid-phase exfoliation to avoid pyrophoric chemicals. The aerogel matrix support enhances conductivity of the composite and the synthesis can complete in 30 min. We find that the addition of transition metal dichalcogenides does not impact the structure of the aerogel, which maintains a high specific surface area up to 620 m 2 g−1 with peak pore radii of 10 nm. While supercapacitor tests of the aerogels yield capacitances around 80 F g−1 at the lowest applied currents, the aerogels loaded with TMD’s exhibit volumetric capacitances up to 127% greater than the unloaded aerogels. In addition, the WS 2 aerogels show excellent cycling stability with no capacitance loss over 2000 cycles, as well as markedly better rate capability and lower charge transfer resistance compared to their MoS 2-loaded counterparts. We hypothesize that these differences in performance stem from differences in contact resistance and in the favorability of ion adsorption on the chalcogenides.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of Graphene Aerogel with High Electrical Conductivity
Worsley, M. A., Pauzauskie, P. J., Olson, T. Y., Biener, J., Satcher, J. H., & Baumann, T. F. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1072299 · Cited by 1,216 · cited 3×
“To improve their performance, research groups have attempted to load them with high-conductivity or high-capacitance materials 16,17 .”
Self-citationHigh yield exfoliation of two-dimensional chalcogenides using sodium naphthalenide
Zheng, J., Zhang, H., Dong, S., Liu, Y., Tai Nai, C., Suk Shin, H., Young Jeong, H., Liu, B., & Ping Loh, K. (2014) · Nature Communications · doi:10.1038/ncomms3995 · Cited by 787 · cited 1×
“In addition, while we employ sonication 28,29 to disperse the TMDs, there are a range of other potentially scalable exfoliation methods including shear mixing 30 , direct synthesis 31 , and intercalation 32,33 to name a few.”
Direct Laser‐Patterned Micro‐Supercapacitors from Paintable MoS2 Films
Cao, L., Yang, S., Gao, W., Liu, Z., Gong, Y., Ma, L., Shi, G., Lei, S., Zhang, Y., Zhang, S., et al. (2013) · Small · doi:10.1002/smll.201203164 · Cited by 513
Catalytic Graphitization of Carbon Aerogels by Transition Metals
Maldonado-Hódar, F. J., Moreno-Castilla, C., Rivera-Utrilla, J., Hanzawa, Y., & Yamada, Y. (2000) · Langmuir · doi:10.1021/la991080r · Cited by 494
Ultralow Density, Monolithic WS2, MoS2, and MoS2/Graphene Aerogels
Worsley, M. A., Shin, S. J., Merrill, M. D., Lenhardt, J., Nelson, A. J., Woo, L. Y., Gash, A. E., Baumann, T. F., & Orme, C. A. (2015) · ACS Nano · doi:10.1021/acsnano.5b00087 · Cited by 182 · cited 1×
“In addition, freestanding TMD fi lms do not exhibit mechanical stability in electrochemical environments, which sets a limit to the maximum size of unsupported fi lms and inhibits high surface area applications 26 .”
Cited by
Applications of 2D MXenes in energy conversion and storage systems
Pang, J., Mendes, R. G., Bachmatiuk, A., Zhao, L., Ta, H. Q., Gemming, T., Liu, H., Liu, Z., & Rummeli, M. H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00324f · Cited by 1,951
Recent advances in preparations and applications of carbon aerogels: A review
Lee, J.-H., & Park, S.-J. (2020) · Carbon · doi:10.1016/j.carbon.2020.02.073 · Cited by 471
Recent trends in transition metal dichalcogenide based supercapacitor electrodes
Cherusseri, J., Choudhary, N., Sambath Kumar, K., Jung, Y., & Thomas, J. (2019) · Nanoscale Horizons · doi:10.1039/c9nh00152b · Cited by 338
Carbon-Based Polymer Nanocomposite for High-Performance Energy Storage Applications
Siwal, S. S., Zhang, Q., Devi, N., & Thakur, V. K. (2020) · Polymers · doi:10.3390/polym12030505 · Cited by 289
Caccavo, D., Cascone, S., Lamberti, G., & Barba, A. A. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00638a · Cited by 262
Metadata
- Authors
- Crane, M. J., Lim, M. B., Zhou, X., & Pauzauskie, P. J.
- Venue
- Microsystems & Nanoengineering
- Published
- 2017-07-17
- Volume
- 3
- Issue
- 1
- Pages
- 17032-17032
- ISSN
- 2055-7434 (ISSN-L)
- OpenAlex
- W2735372353
- Cited by
- 64
- References
- 5
- FWCI
- 2.46
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rapid synthesis of transition metal dichalcogenide–carbon aerogel composites for supercapacitor electrodes. https://app.cochat.ai/papers/10.1038/micronano.2017.32
- The paper
- Crane, M. J., Lim, M. B., Zhou, X., & Pauzauskie, P. J. (2017). Rapid synthesis of transition metal dichalcogenide–carbon aerogel composites for supercapacitor electrodes. Microsystems & Nanoengineering. https://doi.org/10.1038/micronano.2017.32
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.