The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Ablation-cooled material removal with ultrafast bursts of pulses
Open accessAbstract
The use of femtosecond laser pulses allows precise and thermal-damage-free removal of material (ablation) with wide-ranging scientific, medical and industrial applications. However, its potential is limited by the low speeds at which material can be removed and the complexity of the associated laser technology. The complexity of the laser design arises from the need to overcome the high pulse energy threshold for efficient ablation. However, the use of more powerful lasers to increase the ablation rate results in unwanted effects such as shielding, saturation and collateral damage from heat accumulation at higher laser powers. Here we circumvent this limitation by exploiting ablation cooling, in analogy to a technique routinely used in aerospace engineering. We apply ultrafast successions (bursts) of laser pulses to ablate the target material before the residual heat deposited by previous pulses diffuses away from the processing region. Proof-of-principle experiments on various substrates demonstrate that extremely high repetition rates, which make ablation cooling possible, reduce the laser pulse energies needed for ablation and increase the efficiency of the removal process by an order of magnitude over previously used laser parameters. We also demonstrate the removal of brain tissue at two cubic millimetres per minute and dentine at three cubic millimetres per minute without any thermal damage to the bulk.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Femtosecond laser micromachining in transparent materials
Gattass, R. R., & Mazur, E. (2008) · Nature Photonics · doi:10.1038/nphoton.2008.47 · Cited by 3,247
Femtosecond, picosecond and nanosecond laser ablation of solids
Chichkov, B. N., Momma, C., Nolte, S., Alvensleben, F., & Tünnermann, A. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567637 · Cited by 3,066
Mechanisms of femtosecond laser nanosurgery of cells and tissues
Vogel, A., Noack, J., Hüttman, G., & Paltauf, G. (2005) · Applied Physics B · doi:10.1007/s00340-005-2036-6 · Cited by 1,408
Non-thermal melting in semiconductors measured at femtosecond resolution
Rousse, A., Rischel, C., Fourmaux, S., Uschmann, I., Sebban, S., Grillon, G., Balcou, P., Förster, E., Geindre, J. P., Audebert, P., et al. (2001) · Nature · doi:10.1038/35065045 · Cited by 729
Laser-plasma acceleration of quasi-monoenergetic protons from microstructured targets
Schwoerer, H., Pfotenhauer, S., Jäckel, O., Amthor, K.-U., Liesfeld, B., Ziegler, W., Sauerbrey, R., Ledingham, K. W. D., & Esirkepov, T. (2006) · Nature · doi:10.1038/nature04492 · Cited by 721
Coherent quantum control of two-photon transitions by a femtosecond laser pulse
Meshulach, D., & Silberberg, Y. (1998) · Nature · doi:10.1038/24329 · Cited by 717
Functional regeneration after laser axotomy
Yanik, M. F., Cinar, H., Cinar, H. N., Chisholm, A. D., Jin, Y., & Ben-Yakar, A. (2004) · Nature · doi:10.1038/432822a · Cited by 598
Surgical applications of femtosecond lasers
Chung, S. H., & Mazur, E. (2009) · Journal of Biophotonics · doi:10.1002/jbio.200910053 · Cited by 281
Heat accumulation in ultra-short pulsed scanning laser ablation of metals
Bauer, F., Michalowski, A., Kiedrowski, T., & Nolte, S. (2015) · Optics Express · doi:10.1364/oe.23.001035 · Cited by 273
Femtosecond laser near-field ablation from gold nanoparticles
Plech, A., Kotaidis, V., Lorenc, M., & Boneberg, J. (2006) · Nature Physics · doi:10.1038/nphys191 · Cited by 258
Cited by
Laser Synthesis and Processing of Colloids: Fundamentals and Applications
Zhang, D., Gökce, B., & Barcikowski, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00468 · Cited by 1,344
Jiang, L., Wang, A.-D., Li, B., Cui, T.-H., & Lu, Y.-F. (2017) · Light: Science & Applications · doi:10.1038/lsa.2017.134 · Cited by 513
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Smart fire-warning materials and sensors: Design principle, performances, and applications
Lv, L.-Y., Cao, C.-F., Qu, Y.-X., Zhang, G.-D., Zhao, L., Cao, K., Song, P., & Tang, L.-C. (2022) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2022.100690 · Cited by 266
Lei, Y., Sakakura, M., Wang, L., Yu, Y., Wang, H., Shayeganrad, G., & Kazansky, P. G. (2021) · Optica · doi:10.1364/optica.433765 · Cited by 95
Metadata
- Authors
- Kerse, C., Kalaycıoğlu, H., Elahi, P., Çetin, B., Kesim, D. K., Akçaalan, Ö., Yavaş, S., Aşık, M. D., Öktem, B., Hoogland, H., Holzwarth, R., & Ilday, F. Ö.
- Venue
- Nature
- Published
- 2016-07-13
- Volume
- 537
- Issue
- 7618
- Pages
- 84-88
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2472449917
- Cited by
- 978
- References
- 19
- FWCI
- 52.10
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ablation-cooled material removal with ultrafast bursts of pulses. https://app.cochat.ai/papers/10.1038/nature18619
- The paper
- Kerse, C., Kalaycıoğlu, H., Elahi, P., Çetin, B., Kesim, D. K., Akçaalan, Ö., Yavaş, S., Aşık, M. D., Öktem, B., Hoogland, H., Holzwarth, R., & Ilday, F. Ö. (2016). Ablation-cooled material removal with ultrafast bursts of pulses. Nature. https://doi.org/10.1038/nature18619
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.