The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells
Open accessAbstract
Perovskite solar cells are one of the most promising photovoltaic technologies with their extraordinary progress in efficiency and the simple processes required to produce them. However, the frequent presence of a pronounced hysteresis in the current voltage characteristic of these devices arises concerns on the intrinsic stability of organo-metal halides, challenging the reliability of technology itself. Here, we show that n-doping of mesoporous TiO 2 is accomplished by facile post treatment of the films with lithium salts. We demonstrate that the Li-doped TiO 2 electrodes exhibit superior electronic properties, by reducing electronic trap states enabling faster electron transport. Perovskite solar cells prepared using the Li-doped films as scaffold to host the CH 3 NH 3 PbI 3 light harvester produce substantially higher performances compared with undoped electrodes, improving the power conversion efficiency from 17 to over 19% with negligible hysteretic behaviour (lower than 0.3%).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Self-citationOrganometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Self-citationEfficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Cited by
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Self-citationIncorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Self-citationEfficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Imperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Mesoporous materials for energy conversion and storage devices
Li, W., Liu, J., & Zhao, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.23 · Cited by 1,388
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells
Domanski, K., Correa-Baena, J.-P., Mine, N., Nazeeruddin, M. K., Abate, A., Saliba, M., Tress, W., Hagfeldt, A., & Grätzel, M. (2016) · ACS Nano · doi:10.1021/acsnano.6b02613 · Cited by 1,245
Self-citationUnreacted PbI2 as a Double-Edged Sword for Enhancing the Performance of Perovskite Solar Cells
Jacobsson, T. J., Correa-Baena, J.-P., Halvani Anaraki, E., Philippe, B., Stranks, S. D., Bouduban, M. E. F., Tress, W., Schenk, K., Teuscher, J., Moser, J.-E., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06320 · Cited by 901
Self-citationImproving efficiency and stability of perovskite solar cells with photocurable fluoropolymers
Bella, F., Griffini, G., Correa-Baena, J.-P., Saracco, G., Grätzel, M., Hagfeldt, A., Turri, S., & Gerbaldi, C. (2016) · Science · doi:10.1126/science.aah4046 · Cited by 870
Self-citationJesper Jacobsson, T., Correa-Baena, J.-P., Pazoki, M., Saliba, M., Schenk, K., Grätzel, M., & Hagfeldt, A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00030d · Cited by 753
Self-citationTuning defects in oxides at room temperature by lithium reduction
Ou, G., Xu, Y., Wen, B., Lin, R., Ge, B., Tang, Y., Liang, Y., Yang, C., Huang, K., Zu, D., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03765-0 · Cited by 722
Defect and Contact Passivation for Perovskite Solar Cells
Aydin, E., De Bastiani, M., & De Wolf, S. (2019) · Advanced Materials · doi:10.1002/adma.201900428 · Cited by 681
Li, M., Liu, M., Qi, F., Lin, F. R., & Jen, A. K.-Y. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00396 · Cited by 642
Extrinsic ion migration in perovskite solar cells
Li, Z., Xiao, C., Yang, Y., Harvey, S. P., Kim, D. H., Christians, J. A., Yang, M., Schulz, P., Nanayakkara, S. U., Jiang, C.-S., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00358g · Cited by 631
Saliba, M., Correa-Baena, J.-P., Wolff, C. M., Stolterfoht, M., Phung, N., Albrecht, S., Neher, D., & Abate, A. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00136 · Cited by 618
Self-citationDefects engineering for high-performance perovskite solar cells
Wang, F., Bai, S., Tress, W., Hagfeldt, A., & Gao, F. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0035-z · Cited by 568
Self-citationRoy, P., Kumar Sinha, N., Tiwari, S., & Khare, A. (2020) · Solar Energy · doi:10.1016/j.solener.2020.01.080 · Cited by 541
Modeling of Experimental Adsorption Isotherm Data
Chen, X. (2015) · Information · doi:10.3390/info6010014 · Cited by 533
Bu, T., Liu, X., Zhou, Y., Yi, J., Huang, X., Luo, L., Xiao, J., Ku, Z., Peng, Y., Huang, F., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02634j · Cited by 516
Kang, D., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201805214 · Cited by 498
Gao, J., Zhang, H., Guo, X., Luo, J., Zakeeruddin, S. M., Ren, D., & Grätzel, M. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b07415 · Cited by 495
Self-citationPhosphorene and Phosphorene‐Based Materials – Prospects for Future Applications
Batmunkh, M., Bat‐Erdene, M., & Shapter, J. G. (2016) · Advanced Materials · doi:10.1002/adma.201602254 · Cited by 494
The Role of the Interfaces in Perovskite Solar Cells
Shao, S., & Loi, M. A. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.201901469 · Cited by 477
Recent Advances in Flexible Perovskite Solar Cells: Fabrication and Applications
Yang, D., Yang, R., Priya, S., & Liu, S. (. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201809781 · Cited by 461
Thermally stable, planar hybrid perovskite solar cells with high efficiency
Choi, K., Lee, J., Kim, H. I., Park, C. W., Kim, G.-W., Choi, H., Park, S., Park, S. A., & Park, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02242a · Cited by 458
Song, Z., Abate, A., Watthage, S. C., Liyanage, G. K., Phillips, A. B., Steiner, U., Graetzel, M., & Heben, M. J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600846 · Cited by 439
Self-citationRajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Leng, J., Wang, Z., Wang, J., Wu, H.-H., Yan, G., Li, X., Guo, H., Liu, Y., Zhang, Q., & Guo, Z. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00904j · Cited by 425
Chen, H., & Yang, S. (2017) · Advanced Materials · doi:10.1002/adma.201603994 · Cited by 384
A review of aspects of additive engineering in perovskite solar cells
Mahapatra, A., Prochowicz, D., Tavakoli, M. M., Trivedi, S., Kumar, P., & Yadav, P. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07657c · Cited by 369
Interfacial Assembly and Applications of Functional Mesoporous Materials
Duan, L., Wang, C., Zhang, W., Ma, B., Deng, Y., Li, W., & Zhao, D. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00236 · Cited by 368
Xie, J., Huang, K., Yu, X., Yang, Z., Xiao, K., Qiang, Y., Zhu, X., Xu, L., Wang, P., Cui, C., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b04070 · Cited by 365
Cho, Y., Soufiani, A. M., Yun, J. S., Kim, J., Lee, D. S., Seidel, J., Deng, X., Green, M. A., Huang, S., & Ho‐Baillie, A. W. Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703392 · Cited by 334
Hadadian, M., Correa‐Baena, J., Goharshadi, E. K., Ummadisingu, A., Seo, J., Luo, J., Gholipour, S., Zakeeruddin, S. M., Saliba, M., Abate, A., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602785 · Cited by 327
Self-citationFundamental Understanding of Photocurrent Hysteresis in Perovskite Solar Cells
Liu, P., Wang, W., Liu, S., Yang, H., & Shao, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803017 · Cited by 321
Unbroken Perovskite: Interplay of Morphology, Electro‐optical Properties, and Ionic Movement
Correa‐Baena, J., Anaya, M., Lozano, G., Tress, W., Domanski, K., Saliba, M., Matsui, T., Jacobsson, T. J., Calvo, M. E., Abate, A., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600624 · Cited by 301
Self-citationZhang, Y., Foster, C. W., Banks, C. E., Shao, L., Hou, H., Zou, G., Chen, J., Huang, Z., & Ji, X. (2016) · Advanced Materials · doi:10.1002/adma.201601621 · Cited by 291
Efficient planar heterojunction perovskite solar cells with Li-doped compact TiO2 layer
Liu, D., Li, S., Zhang, P., Wang, Y., Zhang, R., Sarvari, H., Wang, F., Wu, J., Wang, Z., & Chen, Z. D. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.11.028 · Cited by 279
Ionic Liquid Control Crystal Growth to Enhance Planar Perovskite Solar Cells Efficiency
Seo, J., Matsui, T., Luo, J., Correa‐Baena, J., Giordano, F., Saliba, M., Schenk, K., Ummadisingu, A., Domanski, K., Hadadian, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600767 · Cited by 274
Self-citationRubidium Fluoride Modified SnO2 for Planar n‐i‐p Perovskite Solar Cells
Zhuang, J., Mao, P., Luan, Y., Chen, N., Cao, X., Niu, G., Jia, F., Wang, F., Cao, S., & Wang, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010385 · Cited by 272
Luo, J., Xia, J., Yang, H., Chen, L., Wan, Z., Han, F., Malik, H. A., Zhu, X., & Jia, C. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00036k · Cited by 271
Rao, H., Ye, S., Sun, W., Yan, W., Li, Y., Peng, H., Liu, Z., Bian, Z., Li, Y., & Huang, C. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.044 · Cited by 261
Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules
Troughton, J., Hooper, K., & Watson, T. M. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.06.039 · Cited by 258
Charge‐Carrier Balance for Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells
Chen, K., Hu, Q., Liu, T., Zhao, L., Luo, D., Wu, J., Zhang, Y., Zhang, W., Liu, F., Russell, T. P., et al. (2016) · Advanced Materials · doi:10.1002/adma.201604048 · Cited by 256
Trends in Aluminium‐Based Intercalation Batteries
Ambroz, F., Macdonald, T. J., & Nann, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602093 · Cited by 253
Deterioration mechanism of perovskite solar cells by operando observation of spin states
Watanabe, T., Yamanari, T., & Marumoto, K. (2020) · Communications Materials · doi:10.1038/s43246-020-00099-7 · Cited by 36
Metadata
- Authors
- Giordano, F., Abate, A., Correa Baena, J. P., Saliba, M., Matsui, T., Im, S. H., Zakeeruddin, S. M., Nazeeruddin, M. K., Hagfeldt, A., & Graetzel, M.
- Venue
- Nature Communications
- Published
- 2016-01-13
- Volume
- 7
- Issue
- 1
- Pages
- 10379-10379
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2260885620
- Cited by
- 869
- References
- 46
- FWCI
- 67.54
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.