The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules
Open accessAbstract
A humidity resistant and versatile fabrication method for the production of very high quality, organic-inorganic perovskite films, solar cells and solar modules is presented. By using ethyl acetate as an anti-solvent during deposition, perovskite solar cells with power conversion efficiencies (PCEs) up to 15% were fabricated in a 75% relative humidity (RH) environment. Ethyl acetate acts as a moisture absorber during spin-coating, protecting sensitive perovskite intermediate phases from airborne water during film formation and annealing. We have demonstrated the manufacture of 50 mm × 50 mm series interconnected modules with PCEs in excess of 10% for 13.5 cm2 devices processed in air at 75%RH and 11.8% at 50%RH. To the best of our knowledge, these results represent the highest efficiency for perovskite solar modules processed under high humidity ambient conditions. This new deposition protocol allows for low-cost, efficient and consistent device fabrication in humid climates and uncontrolled laboratories.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Retraction Note: Carbon enters silica forming a cristobalite-type CO2–SiO2 solid solution
Santoro, M., Gorelli, F. A., Bini, R., Salamat, A., Leonel, G. G., Levelut, C., Cambon, O., & Haines, J. P. (2016) · Nature Communications · doi:10.1038/ncomms13417 · Cited by 143
RetractedOrganometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Metadata
- Authors
- Troughton, J., Hooper, K., & Watson, T. M.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2017-09
- Volume
- 39
- Pages
- 60-68
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2652363653
- Cited by
- 258
- References
- 33
- FWCI
- 12.64
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules. https://app.cochat.ai/papers/10.1016/j.nanoen.2017.06.039
- The paper
- Troughton, J., Hooper, K., & Watson, T. M. (2017). Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules. Nano Energy. https://doi.org/10.1016/j.nanoen.2017.06.039
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
