CoChat

The limits of precision monomer placement in chain growth polymerization

Open access

The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.

Abstract

Precise control over the location of monomers in a polymer chain has been described as the ‘Holy Grail’ of polymer synthesis. Controlled chain growth polymerization techniques have brought this goal closer, allowing the preparation of multiblock copolymers with ordered sequences of functional monomers. Such structures have promising applications ranging from medicine to materials engineering. Here we show, however, that the statistical nature of chain growth polymerization places strong limits on the control that can be obtained. We demonstrate that monomer locations are distributed according to surprisingly simple laws related to the Poisson or beta distributions. The degree of control is quantified in terms of the yield of the desired structure and the standard deviation of the appropriate distribution, allowing comparison between different synthetic techniques. This analysis establishes experimental requirements for the design of polymeric chains with controlled sequence of functionalities, which balance precise control of structure with simplicity of synthesis.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/ncomms10514

Cites

49 of 49 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Some aims of precision polymer synthesis. (a) Absolute control of monomer position and/or separation in a sequence-defined copolymer. (b) Relative control of monomer position and/or separation in a multisite copolymer. (c) Control of number and order of blocks in a multiblock copolymer. Throughout this paper, the letters A, B, C and D refer to different types of monomer. A collection of polymer chains containing on average n units of A followed by m units of B is represented as {AnBm}, whereas a single polymer chain containing exactly N units of A followed by M units of B is represented as ANBM.
Figure 1 Some aims of precision polymer synthesis. (a) Absolute control of monomer position and/or separation in a sequence-defined copolymer. (b) Relative control of monomer position and/or separation in a multisite copolymer. (c) Control of number and order of blocks in a multiblock copolymer. Throughout this paper, the letters A, B, C and D refer to different types of monomer. A collection of polymer chains containing on average n units of A followed by m units of B is represented as {AnBm}, whereas a single polymer chain containing exactly N units of A followed by M units of B is represented as ANBM.CC BY · PubMed Central
Figure 2 Monomer distributions. Probability of finding monomers from each block of an {A5B5A5C5A5D5A5C5A5B5} (a,b) or {A20B20A20C20A20D20A20C20A20B20} (c,d) decablock copolymer as a function of absolute position (a,c) and relative position (b,d) along the polymer chain.
Figure 2 Monomer distributions. Probability of finding monomers from each block of an {A5B5A5C5A5D5A5C5A5B5} (a,b) or {A20B20A20C20A20D20A20C20A20B20} (c,d) decablock copolymer as a function of absolute position (a,c) and relative position (b,d) along the polymer chain.CC BY · PubMed Central
Figure 3 Comparison of multisite copolymers. (a) containing benzyl maleimide (Bz-MI), propyl maleimide (Pr-MI) and pentafluorophenyl maleimide (PFP-MI) insertions, prepared using maleimide additions only (b–d) or by alternating additions of maleimide and styrene (e–g) to an SET-LRP polymerization of styrene21. The expected structures of each copolymer (a,b,e) consist of short regions containing a single maleimide unit, dispersed along a polystyrene chain. The distribution of each type of maleimide is shown in terms of absolute position (c,f) and position relative to the total chain length (d,g).
Figure 3 Comparison of multisite copolymers. (a) containing benzyl maleimide (Bz-MI), propyl maleimide (Pr-MI) and pentafluorophenyl maleimide (PFP-MI) insertions, prepared using maleimide additions only (b–d) or by alternating additions of maleimide and styrene (e–g) to an SET-LRP polymerization of styrene21. The expected structures of each copolymer (a,b,e) consist of short regions containing a single maleimide unit, dispersed along a polystyrene chain. The distribution of each type of maleimide is shown in terms of absolute position (c,f) and position relative to the total chain length (d,g).CC BY · PubMed Central
Figure 4 Addition of bismaleimide to a RAFT polymerization of styrene (St). (a) After addition of the bismaleimide (0.5 equiv), polymerization was allowed to continue for 1 h, during which time the conversion of St increased from 17 to 21% and the bismaleimide was completely consumed. The resulting copolymer contained, on average, 1 maleimide unit per polystyrene chain (with an estimated standard deviation of 1). The distribution of maleimide units resulted in the formation of a mixture of linear chains (L), double chains (H) and multiply linked structures (M). (b) Distribution of chain lengths obtained after addition of 0.5 equiv. of bismaleimide. Linear chains and multiply linked structures are present in addition to H. The distribution immediately before bismaleimide addition is also shown. Deconvolution (c) of the low molar mass portion of the peak using Gaussian components (thick grey line represents best fit) allows estimation of the relative mass fractions of each structure (e), which are in good agreement with the predicted distribution assuming that the maleimide content of each chain follows a Poisson distribution (d).
Figure 4 Addition of bismaleimide to a RAFT polymerization of styrene (St). (a) After addition of the bismaleimide (0.5 equiv), polymerization was allowed to continue for 1 h, during which time the conversion of St increased from 17 to 21% and the bismaleimide was completely consumed. The resulting copolymer contained, on average, 1 maleimide unit per polystyrene chain (with an estimated standard deviation of 1). The distribution of maleimide units resulted in the formation of a mixture of linear chains (L), double chains (H) and multiply linked structures (M). (b) Distribution of chain lengths obtained after addition of 0.5 equiv. of bismaleimide. Linear chains and multiply linked structures are present in addition to H. The distribution immediately before bismaleimide addition is also shown. Deconvolution (c) of the low molar mass portion of the peak using Gaussian components (thick grey line represents best fit) allows estimation of the relative mass fractions of each structure (e), which are in good agreement with the predicted distribution assuming that the maleimide content of each chain follows a Poisson distribution (d).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 49 references

Cited by

Items 101–170 of 170

Metadata

Authors
Gody, G., Zetterlund, P. B., Perrier, S., & Harrisson, S.
Affiliations
  • University of Warwick (GB)
  • UNSW Sydney (AU)
  • Centre National de la Recherche Scientifique (FR)
Corresponding author
Harrisson, Simon
Venue
Nature Communications
Published
2016-02-01
Volume
7
Issue
1
Pages
10514-10514
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2343055596
Cited by
170
References
49
Citations by year
2026: 3 · 2025: 11 · 2024: 9 · 2023: 11 · 2022: 24 · 2021: 18 · 2020: 20 · 2019: 18 · 2018: 23 · 2017: 21 · 2016: 12
FWCI
11.33
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Warwick Research Archive Portal (University of Warwick) (acceptedVersion)
  • HAL (submittedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Royal Society (WM130055)
  • University of Warwick
  • Australian Research Council
Topics
  • Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
Keywords
multiblock copolymers, sequence control, Poisson distribution, beta distribution, functional monomers

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.