CoChat

A rhodium/silicon co-electrocatalyst design concept to surpass platinum hydrogen evolution activity at high overpotentials

Open access

The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.

Abstract

Currently, platinum-based electrocatalysts show the best performance for hydrogen evolution. All hydrogen evolution reaction catalysts should however obey Sabatier’s principle, that is, the adsorption energy of hydrogen to the catalyst surface should be neither too high nor too low to balance between hydrogen adsorption and desorption. To overcome the limitation of this principle, here we choose a composite (rhodium/silicon nanowire) catalyst, in which hydrogen adsorption occurs on rhodium with a large adsorption energy while hydrogen evolution occurs on silicon with a small adsorption energy. We show that the composite is stable with better hydrogen evolution activity than rhodium nanoparticles and even exceeding those of commercial platinum/carbon at high overpotentials. The results reveal that silicon plays a key role in the electrocatalysis. This work may thus open the door for the design and fabrication of electrocatalysts for high-efficiency electric energy to hydrogen energy conversion.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/ncomms12272

Cites

22 of 22 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 TEM characterization. (a) TEM image of a Rh/SiNW. Scale bar, 100 nm. (b) Enlarged HRTEM image of the red square in a showing a Rh crystallite. The 0.22 nm spacing corresponds to Rh (111). Scale bar, 5 nm. (c) HAADF-STEM image of a Rh/SiNW. Scale bar, 50 nm. (d) Its corresponding EDS mapping showing the O, Si and Rh distributions. EDS, energy dispersive spectroscopy; HAADF-STEM, high-angle annular dark field scanning TEM; HRTEM, high-resolution TEM.
Figure 1 TEM characterization. (a) TEM image of a Rh/SiNW. Scale bar, 100 nm. (b) Enlarged HRTEM image of the red square in a showing a Rh crystallite. The 0.22 nm spacing corresponds to Rh (111). Scale bar, 5 nm. (c) HAADF-STEM image of a Rh/SiNW. Scale bar, 50 nm. (d) Its corresponding EDS mapping showing the O, Si and Rh distributions. EDS, energy dispersive spectroscopy; HAADF-STEM, high-angle annular dark field scanning TEM; HRTEM, high-resolution TEM.CC BY · PubMed Central
Figure 2 The electrochemical activity of different electrocatalysts in oxygen-free 0.5 M H2SO4. (a) LSV plots of metal/SiNW catalysts containing about 30 wt% metal. The metal type is indicated. The LSV of 40 wt% Pt/C is also shown. 29.1 wt% Rh/SiNW has the best HER activity of all metal/SiNW catalysts. (b) LSV plots of Rh/SiNW catalysts with different Rh wt% with the 59.9 wt% the best one. (c) LSV plots of SiNWs, pure Rh, 29.1 wt% Rh/SiNW, and 20 and 40 wt% Pt/C. The HER activity of 40 wt% Pt/C is better than that of 20 wt% Pt/C, so only the 40 wt% Pt/C data was used as a reference to the Rh/SiNW data. The HER activity of 29.1 wt% Rh/SiNW is worse than that of 40 wt% Pt/C for V>−160 mV but is better for V<−160 mV. (d) Tafel plots and Tafel slopes derived from c. The Tafel slopes are 145, 40, 30 and 24 mV dec−1 for SiNWs, pure Rh, 40 wt% Pt/C and 29.1 wt% Rh/SiNW, respectively. The Tafel slope of 29.1 wt% Rh/SiNW is smaller than that of 40 wt% Pt/C indicating the better HER performance of 29.1 wt% Rh/SiNW.
Figure 2 The electrochemical activity of different electrocatalysts in oxygen-free 0.5 M H2SO4. (a) LSV plots of metal/SiNW catalysts containing about 30 wt% metal. The metal type is indicated. The LSV of 40 wt% Pt/C is also shown. 29.1 wt% Rh/SiNW has the best HER activity of all metal/SiNW catalysts. (b) LSV plots of Rh/SiNW catalysts with different Rh wt% with the 59.9 wt% the best one. (c) LSV plots of SiNWs, pure Rh, 29.1 wt% Rh/SiNW, and 20 and 40 wt% Pt/C. The HER activity of 40 wt% Pt/C is better than that of 20 wt% Pt/C, so only the 40 wt% Pt/C data was used as a reference to the Rh/SiNW data. The HER activity of 29.1 wt% Rh/SiNW is worse than that of 40 wt% Pt/C for V>−160 mV but is better for V<−160 mV. (d) Tafel plots and Tafel slopes derived from c. The Tafel slopes are 145, 40, 30 and 24 mV dec−1 for SiNWs, pure Rh, 40 wt% Pt/C and 29.1 wt% Rh/SiNW, respectively. The Tafel slope of 29.1 wt% Rh/SiNW is smaller than that of 40 wt% Pt/C indicating the better HER performance of 29.1 wt% Rh/SiNW.CC BY · PubMed Central
Figure 3 HER relative efficiency of 29.1 wt% Rh/SiNW and 40 wt% Pt/C in oxygen-free 0.5 M H2SO4. (a) LSV of both catalysts for high current densities. At 1,000 mA cm−2 the electric power to hydrogen energy conversion efficiency of 29.1 wt% Rh/SiNW is larger by 7.8%. Note that the current for 29.1 wt% Rh/SiNW is more stable. (b) Hydrogen evolution by 29.1 wt% Rh/SiNW and 40 wt% Pt/C systems at −0.4 V. The hydrogen evolution using 29.1 wt% Rh/SiNW is larger by 15%.
Figure 3 HER relative efficiency of 29.1 wt% Rh/SiNW and 40 wt% Pt/C in oxygen-free 0.5 M H2SO4. (a) LSV of both catalysts for high current densities. At 1,000 mA cm−2 the electric power to hydrogen energy conversion efficiency of 29.1 wt% Rh/SiNW is larger by 7.8%. Note that the current for 29.1 wt% Rh/SiNW is more stable. (b) Hydrogen evolution by 29.1 wt% Rh/SiNW and 40 wt% Pt/C systems at −0.4 V. The hydrogen evolution using 29.1 wt% Rh/SiNW is larger by 15%.CC BY · PubMed Central
Figure 4 Modelling of the HER reaction on Rh/SiNW. (a) A schematic representation of the HER reaction mechanism: (i) adsorption of hydrogen ions on the Rh surface. (ii) Diffusion of a hydrogen atom from the Rh surface to the Si surface. (iii) The adsorbed hydrogen atom on the Si surface reacts with a proton to form a hydrogen molecule. And the Rh-adsorbed hydrogen may migrate to the surface of Si atoms (marked with a red circle): (b) IS, initial state; (c) TS, transition state; and (d) FS, final state. (e) The activation energy to get to the transition state is 0.24 eV and in the final state the adsorbed hydrogen is 0.33 eV below the transition state and 0.09 eV below the initial state.
Figure 4 Modelling of the HER reaction on Rh/SiNW. (a) A schematic representation of the HER reaction mechanism: (i) adsorption of hydrogen ions on the Rh surface. (ii) Diffusion of a hydrogen atom from the Rh surface to the Si surface. (iii) The adsorbed hydrogen atom on the Si surface reacts with a proton to form a hydrogen molecule. And the Rh-adsorbed hydrogen may migrate to the surface of Si atoms (marked with a red circle): (b) IS, initial state; (c) TS, transition state; and (d) FS, final state. (e) The activation energy to get to the transition state is 0.24 eV and in the final state the adsorbed hydrogen is 0.33 eV below the transition state and 0.09 eV below the initial state.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 22 references

Cited by

See all 351

Metadata

Authors
Zhu, L., Lin, H., Li, Y., Liao, F., Lifshitz, Y., Sheng, M., Lee, S.-T., & Shao, M.
Affiliations
  • Soochow University (CN)
  • Technion – Israel Institute of Technology (IL)
Corresponding author
  • Li, Youyong
  • Lee, Shuit-Tong
  • Shao, Mingwang
Venue
Nature Communications
Published
2016-07-22
Volume
7
Issue
1
Pages
12272-12272
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2494233754
Cited by
351
References
22
Citations by year
2026: 16 · 2025: 28 · 2024: 44 · 2023: 43 · 2022: 34 · 2021: 35 · 2020: 37 · 2019: 47 · 2018: 40 · 2017: 27
FWCI
10.32
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • National Natural Science Foundation of China (973 Program, 91433111)
  • Government of Jiangsu Province
  • Natural Science Foundation of Jiangsu Province (BK20150305)
  • Priority Academic Program Development of Jiangsu Higher Education Institutions
  • Qinglan Project of Jiangsu Province of China
  • Major Research Plan
  • National Key Research and Development Program of China (2012CB932903)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
Keywords
hydrogen evolution reaction, silicon nanowires, platinum-free electrocatalysts, hydrogen adsorption energy, catalyst stability, electrocatalyst design, water splitting

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.