CoChat

Controlling the motion of multiple objects on a Chladni plate

Open access
Zhou, Quan, Sariola, Veikko, Latifi, Kourosh, Liimatainen, Ville · 2016 · Nature Communications

The DOI matches its Crossref record; 41 of the 42 references it cites were found in a registry or an index.

Abstract

The origin of the idea of moving objects by acoustic vibration can be traced back to 1787, when Ernst Chladni reported the first detailed studies on the aggregation of sand onto nodal lines of a vibrating plate. Since then and to this date, the prevailing view has been that the particle motion out of nodal lines is random, implying uncontrollability. But how random really is the out-of-nodal-lines motion on a Chladni plate? Here we show that the motion is sufficiently regular to be statistically modelled, predicted and controlled. By playing carefully selected musical notes, we can control the position of multiple objects simultaneously and independently using a single acoustic actuator. Our method allows independent trajectory following, pattern transformation and sorting of multiple miniature objects in a wide range of materials, including electronic components, water droplets loaded on solid carriers, plant seeds, candy balls and metal parts.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/ncomms12764

Cites

41 of 41 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Concept of the manipulation method. (a) Schematic of the experimental set-up: the set-up consists of a vibrating plate (I) with the manipulated objects on top, mounted on a piezoelectric actuator (II). The plate is imaged by a camera (III), and the locations of the objects are detected by a computer (IV). The computer chooses next note (V) to be played, so the objects move approximately towards their desired directions. (b) Chladni figures and modelled displacement fields for two different frequencies. (c) Simultaneous manipulation of three 600 μm solder balls. (d) Manipulation of a 7 mm washer. Scale bars, 1 cm.
Figure 1 Concept of the manipulation method. (a) Schematic of the experimental set-up: the set-up consists of a vibrating plate (I) with the manipulated objects on top, mounted on a piezoelectric actuator (II). The plate is imaged by a camera (III), and the locations of the objects are detected by a computer (IV). The computer chooses next note (V) to be played, so the objects move approximately towards their desired directions. (b) Chladni figures and modelled displacement fields for two different frequencies. (c) Simultaneous manipulation of three 600 μm solder balls. (d) Manipulation of a 7 mm washer. Scale bars, 1 cm.CC BY · PubMed Central
Figure 2 Multi-particle manipulation demonstrations. (a) Particle sorting. Six 600 μm solder balls are assigned to two groups, three particles each. The device separates the particles into the assigned groups. (b) Particle pattern transformation. A diamond pattern of four objects—a SMT resistor, a mustard seed, a chia seed and a candy ball—is transformed into a square pattern. (c) Droplet merging. Two 8 μl water droplets on carriers are brought together and merged into a single droplet. Scale bars, 1 cm.
Figure 2 Multi-particle manipulation demonstrations. (a) Particle sorting. Six 600 μm solder balls are assigned to two groups, three particles each. The device separates the particles into the assigned groups. (b) Particle pattern transformation. A diamond pattern of four objects—a SMT resistor, a mustard seed, a chia seed and a candy ball—is transformed into a square pattern. (c) Droplet merging. Two 8 μl water droplets on carriers are brought together and merged into a single droplet. Scale bars, 1 cm.CC BY · PubMed Central
Figure 3 Dependence of the particle motion on actuation signal parameters. (a) Median displacement of a 600 μm solder ball when varying duration and amplitude at 3,990 Hz. The error bars show median standard error, where the median is taken over the whole plate. (b) Inverse nominal amplitude, sound pressure level (SPL) and entropy as a function of frequency. The theoretical entropy curve is not expected to be valid at low frequencies (dashed line).
Figure 3 Dependence of the particle motion on actuation signal parameters. (a) Median displacement of a 600 μm solder ball when varying duration and amplitude at 3,990 Hz. The error bars show median standard error, where the median is taken over the whole plate. (b) Inverse nominal amplitude, sound pressure level (SPL) and entropy as a function of frequency. The theoretical entropy curve is not expected to be valid at low frequencies (dashed line).CC BY · PubMed Central
Figure 4 Comparison of theory and experimentally observed displacement fields. The first row shows the theoretically computed Chladni figure29, the second row shows the absolute displacement and the third row shows the residual ξn. Scale bar (top left), 1 cm.
Figure 4 Comparison of theory and experimentally observed displacement fields. The first row shows the theoretically computed Chladni figure29, the second row shows the absolute displacement and the third row shows the residual ξn. Scale bar (top left), 1 cm.CC BY · PubMed Central
Figure 5 Manipulation accuracy and precision. (a) Six repetitions of line tracking following a 25 × 25 mm box; scale bar, 5 mm; (b) An example error histogram against the reference line. (c) Line tracking accuracy versus the number of notes. The error bars represent s.d.
Figure 5 Manipulation accuracy and precision. (a) Six repetitions of line tracking following a 25 × 25 mm box; scale bar, 5 mm; (b) An example error histogram against the reference line. (c) Line tracking accuracy versus the number of notes. The error bars represent s.d.CC BY · PubMed Central
Figure 6 Results of object motion simulation. (a) With varying initial position, the object is transported towards the nearest nodes. (b) Comparison of two simulation results with initial position shifted by 1 nm (solid red and blue lines). In 300 ms, the difference has grown to 100 μm, yet the positions meet again at the node. The shaded green area is the s.d.'s around the mean trajectory (not shown) of 100 simulations, when initial position was varied within a range of ±10 μm.
Figure 6 Results of object motion simulation. (a) With varying initial position, the object is transported towards the nearest nodes. (b) Comparison of two simulation results with initial position shifted by 1 nm (solid red and blue lines). In 300 ms, the difference has grown to 100 μm, yet the positions meet again at the node. The shaded green area is the s.d.'s around the mean trajectory (not shown) of 100 simulations, when initial position was varied within a range of ±10 μm.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 109

Metadata

Authors
Zhou, Q., Sariola, V., Latifi, K., & Liimatainen, V.
Affiliations
  • Aalto University (FI)
  • Tampere University of Technology (FI)
Corresponding author
Zhou, Quan
Venue
Nature Communications
Published
2016-09-09
Volume
7
Issue
1
Pages
12764-12764
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2513276422
Cited by
103
References
42
Citations by year
2026: 10 · 2025: 5 · 2024: 10 · 2023: 9 · 2022: 13 · 2021: 20 · 2020: 13 · 2019: 11 · 2018: 6 · 2017: 6
FWCI
3.70
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Aaltodoc (Aalto University) (submittedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Tampere University Institutional Repository (Tampere University) (submittedVersion, cc-by)
Funders
Jenny ja Antti Wihurin Rahasto
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Microfluidic and Bio-sensing Technologies
  • Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Acoustic Wave Phenomena Research
  • Physical Sciences › Physics and Astronomy › Statistical and Nonlinear Physics › stochastic dynamics and bifurcation
Keywords
Chladni plate, acoustic vibration, acoustic manipulation, nodal lines, acoustic actuators, trajectory tracking, pattern transformation, droplet manipulation, seed sorting

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.