CoChat

CRISPR-Cas9-targeted fragmentation and selective sequencing enable massively parallel microsatellite analysis

Open access
Shin, GiWon, Grimes, Susan M., Lee, HoJoon, Lau, Billy T., Xia, Li C., Ji, Hanlee P. · 2017 · Nature Communications

The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.

Abstract

Microsatellites are multi-allelic and composed of short tandem repeats (STRs) with individual motifs composed of mononucleotides, dinucleotides or higher including hexamers. Next-generation sequencing approaches and other STR assays rely on a limited number of PCR amplicons, typically in the tens. Here, we demonstrate STR-Seq, a next-generation sequencing technology that analyses over 2,000 STRs in parallel, and provides the accurate genotyping of microsatellites. STR-Seq employs in vitro CRISPR-Cas9-targeted fragmentation to produce specific DNA molecules covering the complete microsatellite sequence. Amplification-free library preparation provides single molecule sequences without unique molecular barcodes. STR-selective primers enable massively parallel, targeted sequencing of large STR sets. Overall, STR-Seq has higher throughput, improved accuracy and provides a greater number of informative haplotypes compared with other microsatellite analysis approaches. With these new features, STR-Seq can identify a 0.1% minor genome fraction in a DNA mixture composed of different, unrelated samples.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/ncomms14291

Cites

44 of 44 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Overview of STR-Seq. (a) Guide RNAs and primer probes were designed to target STRs and proximal SNPs. We target both plus and minus strands with only the plus strand targeting illustrated. In the first step, Cas9 enzyme cleaves upstream of STR. The DNA libraries including the STR and SNP are target sequenced. (b) After initial alignment of Read 2 from any given paired-end set, we use the primer probe sequence derived from Read 2 as an index tag to link the Read 1 microsatellite internal motif and flanking sequences. If the primer probe sequence aligns within 2 bp of the expected primer probe start position, the paired Read 1 was assigned to its specific STR index tag. Based on the human genome reference, we identified the flanking genomic sequences that mark the complete STR segment and then determined the composition (that is, mononucleotide, dinucleotide and so on) and overall length of the repeat motif structure. Read 1 sequences that contained both the 5′ and 3′ flanking sequences with the internal microsatellite were used for genotyping. STR genotypes are called from Read 1. SNPs are phased with the STR genotype to generate haplotypes. (c) As an example of STR-Seq haplotyping, paired end alignments to the reference genome are shown for a STR target (trf747130) for sample NA12878. After the STR genotyping process, 114 and 133 read pairs were identified to have 11 and 8 repeats of a tetranucleotide motif (ATGA) in their Read 1s, respectively. Within each read pair group, all the base calls at the SNP position were identical, being either C (reference) or G (alternative). The site where CRISPR–Cas9 targets is indicated with red arrow, and the two haplotypes are illustrated on the bottom.
Figure 1 Overview of STR-Seq. (a) Guide RNAs and primer probes were designed to target STRs and proximal SNPs. We target both plus and minus strands with only the plus strand targeting illustrated. In the first step, Cas9 enzyme cleaves upstream of STR. The DNA libraries including the STR and SNP are target sequenced. (b) After initial alignment of Read 2 from any given paired-end set, we use the primer probe sequence derived from Read 2 as an index tag to link the Read 1 microsatellite internal motif and flanking sequences. If the primer probe sequence aligns within 2 bp of the expected primer probe start position, the paired Read 1 was assigned to its specific STR index tag. Based on the human genome reference, we identified the flanking genomic sequences that mark the complete STR segment and then determined the composition (that is, mononucleotide, dinucleotide and so on) and overall length of the repeat motif structure. Read 1 sequences that contained both the 5′ and 3′ flanking sequences with the internal microsatellite were used for genotyping. STR genotypes are called from Read 1. SNPs are phased with the STR genotype to generate haplotypes. (c) As an example of STR-Seq haplotyping, paired end alignments to the reference genome are shown for a STR target (trf747130) for sample NA12878. After the STR genotyping process, 114 and 133 read pairs were identified to have 11 and 8 repeats of a tetranucleotide motif (ATGA) in their Read 1s, respectively. Within each read pair group, all the base calls at the SNP position were identical, being either C (reference) or G (alternative). The site where CRISPR–Cas9 targets is indicated with red arrow, and the two haplotypes are illustrated on the bottom.CC BY · PubMed Central
Figure 2 Performance of STR-Seq. (a) The STR alleles determined by STR-Seq and CE are compared using a ‘dosage' value that is derived from the number of base pairs remaining after subtracting the reference allele. The R-squared value is shown at the top left in the plot, and the dotted diagonal line indicates 1:1 concordance. (b) BAT26 is an example where the true STR allele was obscured by artificial indels. The bar graphs show read counts for all observed alleles both for PCR-amplified (blue) and PCR-free (red) STR-Seq analyses. PCR-free STR-Seq analysis reduced the fraction of stutter artifact from 64 to 30%. The STR allelotype is indicated by number of motif repeats, and the true allelotype is indicated with the black arrow on the top of the corresponding bar. (c) The distributions of stutter artifact fractions are shown for NA12878's 686 STRs. For each STR, number of non-allelic reads is divided by the total number STR-spanning reads to get the fraction of artificial indels. Box plots for PCR-amplified (left) versus PCR-free (right) are shown top right. The horizontal thickness represents estimated and normalized Kernel density. The median values are indicated as black dots inside the grey boxes and the difference is significant (P<2.2e−16 by Wilcoxon signed-rank test).
Figure 2 Performance of STR-Seq. (a) The STR alleles determined by STR-Seq and CE are compared using a ‘dosage' value that is derived from the number of base pairs remaining after subtracting the reference allele. The R-squared value is shown at the top left in the plot, and the dotted diagonal line indicates 1:1 concordance. (b) BAT26 is an example where the true STR allele was obscured by artificial indels. The bar graphs show read counts for all observed alleles both for PCR-amplified (blue) and PCR-free (red) STR-Seq analyses. PCR-free STR-Seq analysis reduced the fraction of stutter artifact from 64 to 30%. The STR allelotype is indicated by number of motif repeats, and the true allelotype is indicated with the black arrow on the top of the corresponding bar. (c) The distributions of stutter artifact fractions are shown for NA12878's 686 STRs. For each STR, number of non-allelic reads is divided by the total number STR-spanning reads to get the fraction of artificial indels. Box plots for PCR-amplified (left) versus PCR-free (right) are shown top right. The horizontal thickness represents estimated and normalized Kernel density. The median values are indicated as black dots inside the grey boxes and the difference is significant (P<2.2e−16 by Wilcoxon signed-rank test).CC BY · PubMed Central
Figure 3 Performance of targeted CRISPR–Cas9 fragmentation. (a) For the STR target presented here (trf676281; [ATAG]n), two gRNAs were designed with two pairs of primer probes. Read depth and pile-up of Read 1s are compared between negative control and target-specifically fragmented sample DNAs. In the pile-up plots, Read 1s from plus probes (binding downstream of the STR) align to the reference itself (forward reads; blue) while those from minus probe align to the reverse complementary of reference (reverse reads; green). For the two CRISPR–Cas9 target sites, among all reads having an overlap with each, 92 and 67% shared their alignment start positions, respectively (indicated by red dotted arrows). Read depth for the STR region (shaded) was higher than that of other flanking regions when the targeted fragmentation was used. Pink-coloured blocks in read depth and pile-up plots indicate deletion events. In the reference genome, red, yellow, green and blue bars indicate A, C, G and T bases, respectively. (b) The read fraction distribution for 2,625 CRISPR–Cas9 target sites are shown that start or stop within 2 bp of the target cut site. The median values are indicated as white dots inside the black boxes, and the difference was significant (P<2.2e−16 by Wilcoxon signed rank test). The horizontal thickness represents estimated and normalized Kernel density. (c) Estimated Kernel density for observed fraction of heterozygous alleles is separately shown for STRs with (n=56) and without (n=56) gRNA targeting. The distribution is significantly different between negative control and test runs for gRNA-targeted STRs (top; P=3.8e−06 by Levene's test), but similar for non-gRNA-targeted STRs (bottom; P=0.96 by Levene's test).
Figure 3 Performance of targeted CRISPR–Cas9 fragmentation. (a) For the STR target presented here (trf676281; [ATAG]n), two gRNAs were designed with two pairs of primer probes. Read depth and pile-up of Read 1s are compared between negative control and target-specifically fragmented sample DNAs. In the pile-up plots, Read 1s from plus probes (binding downstream of the STR) align to the reference itself (forward reads; blue) while those from minus probe align to the reverse complementary of reference (reverse reads; green). For the two CRISPR–Cas9 target sites, among all reads having an overlap with each, 92 and 67% shared their alignment start positions, respectively (indicated by red dotted arrows). Read depth for the STR region (shaded) was higher than that of other flanking regions when the targeted fragmentation was used. Pink-coloured blocks in read depth and pile-up plots indicate deletion events. In the reference genome, red, yellow, green and blue bars indicate A, C, G and T bases, respectively. (b) The read fraction distribution for 2,625 CRISPR–Cas9 target sites are shown that start or stop within 2 bp of the target cut site. The median values are indicated as white dots inside the black boxes, and the difference was significant (P<2.2e−16 by Wilcoxon signed rank test). The horizontal thickness represents estimated and normalized Kernel density. (c) Estimated Kernel density for observed fraction of heterozygous alleles is separately shown for STRs with (n=56) and without (n=56) gRNA targeting. The distribution is significantly different between negative control and test runs for gRNA-targeted STRs (top; P=3.8e−06 by Levene's test), but similar for non-gRNA-targeted STRs (bottom; P=0.96 by Levene's test).CC BY · PubMed Central
Figure 4 Sensitive detection of minor component's haplotype in mixture DNA. (a) Observed allele fractions of informative haplotypes are plotted against expected ratio based on the minor component fractions (25 to 0.1%) of a two-component mixture (HGDP00924 as minor and HGDP00925 as major). Most of the informative haplotypes are one of the two heterozygous alleles of the minor component, and their allelic fractions are half of the overall component fraction. For example, only one informative allele from the 10% ratio mixture (yellow dots) is expected to be 10% while the expected fraction for every other allele is 5%. The scale of both x- and y-axes are shown in log scale. The R-squared value is shown at the top left in the plot, and the dotted diagonal line indicates 1:1 concordance. (b) A mixture of two individuals (0.1% HGDP00924 and 99.9% HGDP00925) was analysed for a dinucleotide repeat (trf291274). M and N alleles indicate genotypes from the major and minor components, respectively. The bar graph in the right box shows read counts for all observed alleles separately for two SNP alleles found by STR-Seq analysis. A haplotype (11 motif repeats and G allele) specific to minor component was detectable. On the other hand, the bar graph on the bottom left shows collective read counts regardless of linked SNP genotype. Both alleles from minor components are not detectable because they are mixed with artificial indels from the major component.
Figure 4 Sensitive detection of minor component's haplotype in mixture DNA. (a) Observed allele fractions of informative haplotypes are plotted against expected ratio based on the minor component fractions (25 to 0.1%) of a two-component mixture (HGDP00924 as minor and HGDP00925 as major). Most of the informative haplotypes are one of the two heterozygous alleles of the minor component, and their allelic fractions are half of the overall component fraction. For example, only one informative allele from the 10% ratio mixture (yellow dots) is expected to be 10% while the expected fraction for every other allele is 5%. The scale of both x- and y-axes are shown in log scale. The R-squared value is shown at the top left in the plot, and the dotted diagonal line indicates 1:1 concordance. (b) A mixture of two individuals (0.1% HGDP00924 and 99.9% HGDP00925) was analysed for a dinucleotide repeat (trf291274). M and N alleles indicate genotypes from the major and minor components, respectively. The bar graph in the right box shows read counts for all observed alleles separately for two SNP alleles found by STR-Seq analysis. A haplotype (11 motif repeats and G allele) specific to minor component was detectable. On the other hand, the bar graph on the bottom left shows collective read counts regardless of linked SNP genotype. Both alleles from minor components are not detectable because they are mixed with artificial indels from the major component.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 44 references

Cited by

See all 57

Metadata

Authors
Shin, G., Grimes, S. M., Lee, H., Lau, B. T., Xia, L. C., & Ji, H. P.
Affiliations
  • Stanford University (US)
  • Stanford Medicine (US)
Corresponding author
Ji, Hanlee P.
Venue
Nature Communications
Published
2017-02-07
Volume
8
Issue
1
Pages
14291-14291
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2587437507
Cited by
54
References
44
Citations by year
2026: 5 · 2025: 6 · 2024: 3 · 2023: 4 · 2022: 5 · 2021: 5 · 2020: 4 · 2019: 8 · 2018: 8 · 2017: 6
FWCI
2.91
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • National Human Genome Research Institute (P01HG000205, R01HG006137)
  • National Cancer Institute (R33CA174575)
  • National Institute of Justice (2013-DN-BX-K010)
Topics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Genomics and Phylogenetic Studies
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Genetics › Forensic and Genetic Research
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › CRISPR and Genetic Engineering
Keywords
microsatellite markers, next-generation sequencing, microsatellite genotyping, haplotype analysis, DNA mixtures, forensic DNA analysis
MeSH terms
Alleles, Haplotypes, Humans, Genomic Library, Human Genome Project, Sequence Analysis, DNA, Microsatellite Repeats, Polymorphism, Single Nucleotide, High-Throughput Nucleotide Sequencing, CRISPR-Cas Systems

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.