The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy
Open accessAbstract
Combinations of high strength and ductility are hard to attain in metals. Exceptions include materials exhibiting twinning-induced plasticity. To understand how the strength-ductility trade-off can be defeated, we apply in situ, and aberration-corrected scanning, transmission electron microscopy to examine deformation mechanisms in the medium-entropy alloy CrCoNi that exhibits one of the highest combinations of strength, ductility and toughness on record. Ab initio modelling suggests that it has negative stacking-fault energy at 0K and high propensity for twinning. With deformation we find that a three-dimensional (3D) hierarchical twin network forms from the activation of three twinning systems. This serves a dual function: conventional twin-boundary (TB) strengthening from blockage of dislocations impinging on TBs, coupled with the 3D twin network which offers pathways for dislocation glide along, and cross-slip between, intersecting TB-matrix interfaces. The stable twin architecture is not disrupted by interfacial dislocation glide, serving as a continuous source of strength, ductility and toughness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Kresse, G., & Hafner, J. (1994) · Physical Review B · doi:10.1103/physrevb.49.14251 · Cited by 23,019
Perdew, J. P., Chevary, J. A., Vosko, S. H., Jackson, K. A., Pederson, M. R., Singh, D. J., & Fiolhais, C. (1992) · Physical Review B · doi:10.1103/physrevb.46.6671 · Cited by 22,269
Perdew, J. P., Chevary, J. A., Vosko, S. H., Jackson, K. A., Pederson, M. R., Singh, D. J., & Fiolhais, C. (1993) · Physical Review B · doi:10.1103/physrevb.48.4978.2 · Cited by 17,144
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Self-citationMetastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Self-citationSpecial quasirandom structures
Zunger, A., Wei, S.-H., Ferreira, L. G., & Bernard, J. E. (1990) · Physical Review Letters · doi:10.1103/physrevlett.65.353 · Cited by 3,935
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Self-citationWu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Self-citationRevealing the Maximum Strength in Nanotwinned Copper
Lu, L., Chen, X., Huang, X., & Lu, K. (2009) · Science · doi:10.1126/science.1167641 · Cited by 2,110
Kumar, K. S., Swygenhoven, H. V., & Suresh, S. (2003) · Acta Materialia · doi:10.1016/j.actamat.2003.08.032 · Cited by 1,988
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,930
Self-citationRelative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Self-citationTensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Self-citationEvading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins
Wei, Y., Li, Y., Zhu, L., Liu, Y., Lei, X., Wang, G., Wu, Y., Mi, Z., Liu, J., Wang, H., et al. (2014) · Nature Communications · doi:10.1038/ncomms4580 · Cited by 1,109
Wu, Z., Bei, H., Otto, F., Pharr, G. M., & George, E. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2013.10.024 · Cited by 909
Self-citationMechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy
Zaddach, A. J., Niu, C., Koch, C. C., & Irving, D. L. (2013) · JOM · doi:10.1007/s11837-013-0771-4 · Cited by 878
Design of a twinning-induced plasticity high entropy alloy
Deng, Y., Tasan, C. C., Pradeep, K. G., Springer, H., Kostka, A., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.014 · Cited by 861
Mechanical annealing and source-limited deformation in submicrometre-diameter Ni crystals
Shan, Z. W., Mishra, R. K., Syed Asif, S. A., Warren, O. L., & Minor, A. M. (2008) · Nature Materials · doi:10.1038/nmat2085 · Cited by 851
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Self-citationInterfacial plasticity governs strain rate sensitivity and ductility in nanostructured metals
Zhu, T., Li, J., Samanta, A., Kim, H. G., & Suresh, S. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0611097104 · Cited by 591
Ma, D., Grabowski, B., Körmann, F., Neugebauer, J., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.08.050 · Cited by 556
Deformation of single crystal Hadfield steel by twinning and slip
Karaman, I., Sehitoglu, H., Gall, K., Chumlyakov, Y. I., & Maier, H. J. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00383-3 · Cited by 422
Origin of dramatic oxygen solute strengthening effect in titanium
Yu, Q., Qi, L., Tsuru, T., Traylor, R., Rugg, D., Morris, J. W., Asta, M., Chrzan, D. C., & Minor, A. M. (2015) · Science · doi:10.1126/science.1260485 · Cited by 395
Self-citationApplication of the exact muffin-tin orbitals theory: the spherical cell approximation
Vitos, L., Skriver, H. L., Johansson, B., & Kollár, J. (2000) · Computational Materials Science · doi:10.1016/s0927-0256(99)00098-1 · Cited by 369
Quantitative prediction of solute strengthening in aluminium alloys
Leyson, G. P. M., Curtin, W. A., Hector, L. G., & Woodward, C. F. (2010) · Nature Materials · doi:10.1038/nmat2813 · Cited by 326
High‐Strength and High‐Ductility Nanostructured and Amorphous Metallic Materials
Kou, H., Lu, J., & Li, Y. (2014) · Advanced Materials · doi:10.1002/adma.201401595 · Cited by 283
Mechanical properties of nickel silicon carbide nanocomposites
Zimmerman, A., Palumbo, G., Aust, K. T., & Erb, U. (2002) · Materials Science and Engineering A · doi:10.1016/s0921-5093(01)01692-6 · Cited by 262
Atomic-scale characterization and modeling of 60° dislocations in a high-entropy alloy
Smith, T. M., Hooshmand, M. S., Esser, B. D., Otto, F., McComb, D. W., George, E. P., Ghazisaeidi, M., & Mills, M. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.045 · Cited by 226
Self-citationSpin-driven ordering of Cr in the equiatomic high entropy alloy NiFeCrCo
Niu, C., Zaddach, A. J., Oni, A. A., Sang, X., Hurt, J. W., LeBeau, J. M., Koch, C. C., & Irving, D. L. (2015) · Applied Physics Letters · doi:10.1063/1.4918996 · Cited by 225
Wolf, U., Ernst, F., Muschik, T., Finnis, M. W., & Fischmeister, H. F. (1992) · Philosophical Magazine A · doi:10.1080/01418619208248003 · Cited by 205
Strengthening in Gold Nanopillars with Nanoscale Twins
Afanasyev, K. A., & Sansoz, F. (2007) · Nano Letters · doi:10.1021/nl070959l · Cited by 195
Priester, L. (2012) · Springer series in materials science · doi:10.1007/978-94-007-4969-6 · Cited by 145
Tensile behavior of a nanocrystalline Ni–Fe alloy
Li, H., & Ebrahimi, F. (2006) · Acta Materialia · doi:10.1016/j.actamat.2006.02.033 · Cited by 116
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Self-citationHigh entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Self-citationMechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Short-range order and its impact on the CrCoNi medium-entropy alloy
Zhang, R., Zhao, S., Ding, J., Chong, Y., Jia, T., Ophus, C., Asta, M., Ritchie, R. O., & Minor, A. M. (2020) · Nature · doi:10.1038/s41586-020-2275-z · Cited by 1,279
Self-citationMechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Li, Z., Zhao, S., Ritchie, R. O., & Meyers, M. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.003 · Cited by 1,171
Self-citation
Metadata
- Authors
- Zhang, Z., Sheng, H., Wang, Z., Gludovatz, B., Zhang, Z., George, E. P., Yu, Q., Mao, S. X., & Ritchie, R. O.
- Venue
- Nature Communications
- Published
- 2017-02-20
- Volume
- 8
- Issue
- 1
- Pages
- 14390-14390
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2590213398
- Cited by
- 664
- References
- 38
- FWCI
- 35.87
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.