The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Wafer-scale single-crystal perovskite patterned thin films based on geometrically-confined lateral crystal growth
Open accessAbstract
We report a facile roll-printing method, geometrically confined lateral crystal growth, for the fabrication of large-scale, single-crystal CH 3 NH 3 PbI 3 perovskite thin films. Geometrically confined lateral crystal growth is based on transfer of a perovskite ink solution via a patterned rolling mould to a heated substrate, where the solution crystallizes instantly with the immediate evaporation of the solvent. The striking feature of this method is that the instant crystallization of the feeding solution under geometrical confinement leads to the unidirectional lateral growth of single-crystal perovskites. Here, we fabricated single-crystal perovskites in the form of a patterned thin film (3 × 3 inch) with a high carrier mobility of 45.64 cm 2 V−1 s−1. We also used these single-crystal perovskite thin films to construct solar cells with a lateral configuration. Their active-area power conversion efficiency shows a highest value of 4.83%, which exceeds the literature efficiency values of lateral perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Cited by
A fabrication process for flexible single-crystal perovskite devices
Lei, Y., Chen, Y., Zhang, R., Li, Y., Yan, Q., Lee, S., Yu, Y., Tsai, H., Choi, W., Wang, K., et al. (2020) · Nature · doi:10.1038/s41586-020-2526-z · Cited by 430
Quasi-Two-Dimensional Halide Perovskite Single Crystal Photodetector
Wang, K., Wu, C., Yang, D., Jiang, Y., & Priya, S. (2018) · ACS Nano · doi:10.1021/acsnano.8b01999 · Cited by 369
Liu, Y., Yang, Z., & Liu, S. (. (2018) · Advanced Science · doi:10.1002/advs.201700471 · Cited by 305
High‐Performance Single‐Crystalline Perovskite Thin‐Film Photodetector
Yang, Z., Deng, Y., Zhang, X., Wang, S., Chen, H., Yang, S., Khurgin, J., Fang, N. X., Zhang, X., & Ma, R. (2018) · Advanced Materials · doi:10.1002/adma.201704333 · Cited by 301
Wu, C., Wang, Z., Liang, L., Gui, T., Zhong, W., Du, R., Xie, C., Wang, L., & Luo, L. (2019) · Small · doi:10.1002/smll.201900730 · Cited by 72
Metadata
- Authors
- Lee, L., Baek, J., Park, K. S., Lee, Y.-E., Shrestha, N. K., & Sung, M. M.
- Venue
- Nature Communications
- Published
- 2017-07-10
- Volume
- 8
- Issue
- 1
- Pages
- 15882-15882
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2727990094
- Cited by
- 206
- References
- 3
- FWCI
- 9.62
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.