CoChat

Observation of a three-dimensional topological Dirac semimetal phase in high-mobility Cd3As2

Open access

The DOI matches its Crossref record; 47 of the 48 references it cites were found in a registry or an index; 8 of the 16 sources its claims cite were checked for support.

Abstract

Symmetry-broken three-dimensional (3D) topological Dirac semimetal systems with strong spin-orbit coupling can host many exotic Hall-like phenomena and Weyl fermion quantum transport. Here, using high-resolution angle-resolved photoemission spectroscopy, we performed systematic electronic structure studies on Cd3As2, which has been predicted to be the parent material, from which many unusual topological phases can be derived. We observe a highly linear bulk band crossing to form a 3D dispersive Dirac cone projected at the Brillouin zone centre by studying the (001)-cleaved surface. Remarkably, an unusually high in-plane Fermi velocity up to 1.5×10(6) ms(-1) is observed in our samples, where the mobility is known up to 40,000 cm2 V(-1) s(-1), suggesting that Cd3As2 can be a promising candidate as an anisotropic-hypercone (three-dimensional) high spin-orbit analogue of 3D graphene. Our discovery of the Dirac-like bulk topological semimetal phase in Cd3As2 opens the door for exploring higher dimensional spin-orbit Dirac physics in a real material.

Overview

CoChat Summary

TL;DR

Using high-resolution ARPES, the authors identify a gapless three-dimensional topological Dirac semimetal phase in stoichiometric Cd3As2, with a bulk Dirac cone projected at the (001) surface Brillouin zone centre. They report a high in-plane Fermi velocity and out-of-plane Dirac dispersion consistent with a 3D Dirac semimetal.

Key findings

  • A linearly dispersive upper Dirac cone is observed at the surface BZ centre \(\bar{\Gamma}\), with the Dirac node at binding energy \(E_B \simeq 0.2\) eV; at the Fermi level only the upper Dirac band is observed, while the lower Dirac cone coexists with another parabolic bulk valence band.
  • The in-plane Fermi velocity is about \(9.8\) eVÅ (\(\simeq 1.5 \times 10^6\) m s\(^{-1}\)), more than tenfold larger than the theoretical prediction of \(0.15\) eVÅ; the samples have carrier density \(5.2 \times 10^{18}\) cm\(^{-3}\) and mobility \(42{,}850\) cm\(^2\) V\(^{-1}\) s\(^{-1}\) at 130 K.
  • Photon-energy-dependent ARPES shows a gapless in-plane Dirac-like cone at 102 eV and gap opening away from 102 eV, plus an out-of-plane \(E\)–\(k_z\) dispersion; the out-of-plane Fermi velocity is estimated only at order-of-magnitude level as about \(10^5\) m s\(^{-1}\).
  • Spin-resolved ARPES shows no observable net spin polarization within experimental resolution, consistent with a bulk rather than topological-surface origin; compared with Bi2Se3 and critical-composition BiTl(S\(_{1-d}\)Se\(_d\))2 and (Bi\(_{1-d}\)In\(_d\))2Se3, Cd3As2 lacks a full bulk gap and has much higher Fermi velocity.

Methods

  • High-resolution angle-resolved photoemission spectroscopy (ARPES) on (001)-cleaved single-crystalline Cd3As2; Cd 4d and As 3d core levels confirm chemical composition, with measurements at photon energies including 22 eV and 90–114 eV and temperatures around 14–15 K.
  • First-principles band calculations are compared with ARPES dispersion maps, constant-energy contour maps, and photon-energy-dependent \(k_z\) cuts; spin-resolved ARPES is performed on a relatively p-type sample.
  • Different growth batches are used to vary chemical potential; transport characterization gives carrier density and mobility at 130 K.

Limitations

  • Stated: the sample used for \(k_z\) dispersion measurements is relatively p-type (about 80 meV from the Dirac point) compared with the in-plane sample (about 200 meV from the Dirac point), so direct comparison with previous transport data in terms of Fermi-velocity anisotropy is not applicable.
  • Stated: the out-of-plane Fermi velocity is estimated only at the order-of-magnitude level; spin-resolved measurements show no net spin polarization only within experimental resolution; the origin of the filling behaviour in Cd3As2 and related critical-composition BDS phases is not fully understood.
  • Stated: the crystals are nearly stoichiometric by EPMA and X-ray diffraction, but some low-level defects are not ruled out, though the authors say these do not affect the main conclusion. Evident from the text: ARPES is surface-sensitive, and the bulk 3D Dirac interpretation relies on photon-energy-dependent \(k_z\) dispersion and comparison to theory; observed anisotropies in iso-energetic contours are likely due to matrix element effects.

Model-written summary of a shortened version of the paper’s full text (it is longer than we read). Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/ncomms4786

Cites

47 of 47 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Brillouin zone symmetry and 3D Dirac cone. ( a ) Cd3As2 crystalizes in a tetragonal body centre structure with space group of I 41cd, which has 32 number of formula units in the unit cell. The tetragonal structure has lattice constant of a ¼ 12.670 Å, b ¼ 12.670 Å and c ¼ 25.480Å. ( b ) The basic structure unit is a four corner-sharing CdAs3-trigonal pyramid. ( c ) Core-level spectroscopic measurement where Cd 4 d and As 3 d peaks are clearly observed. Inset shows a picture of the Cd3As2 samples used for angle-resolved photoemission spectroscopy (ARPES) measurements. The flat and mirrorlike surface indicate the high quality of our samples. ( d ) The bulk BZ and the projected surface BZ along the (001) direction. The red crossings locate at ( k x , k y , k z) ¼ (0, 0, 0.15(2 p )/( c *)) ( c * ¼ c / a ). They denote the two special k points along the G  Z momentum space cut-direction, where 3D Dirac bandtouchings are protected by the crystalline C 4 symmetry along the k z axis. ( e ) Second derivative image of ARPES dispersion map of Cd3As2 over the wider binding energy range. Various bands are well-resolved up to 3 eV binding energy range. ( f ) ARPES E B  k x cut of Cd3As2 near the Fermi level at around surface BZ centre  G point.
Figure 1 Brillouin zone symmetry and 3D Dirac cone. ( a ) Cd3As2 crystalizes in a tetragonal body centre structure with space group of I 41cd, which has 32 number of formula units in the unit cell. The tetragonal structure has lattice constant of a ¼ 12.670 Å, b ¼ 12.670 Å and c ¼ 25.480Å. ( b ) The basic structure unit is a four corner-sharing CdAs3-trigonal pyramid. ( c ) Core-level spectroscopic measurement where Cd 4 d and As 3 d peaks are clearly observed. Inset shows a picture of the Cd3As2 samples used for angle-resolved photoemission spectroscopy (ARPES) measurements. The flat and mirrorlike surface indicate the high quality of our samples. ( d ) The bulk BZ and the projected surface BZ along the (001) direction. The red crossings locate at ( k x , k y , k z) ¼ (0, 0, 0.15(2 p )/( c *)) ( c * ¼ c / a ). They denote the two special k points along the G Z momentum space cut-direction, where 3D Dirac bandtouchings are protected by the crystalline C 4 symmetry along the k z axis. ( e ) Second derivative image of ARPES dispersion map of Cd3As2 over the wider binding energy range. Various bands are well-resolved up to 3 eV binding energy range. ( f ) ARPES E B k x cut of Cd3As2 near the Fermi level at around surface BZ centre  G point.From the PDF
Image 2
From the PDF
Figure 3 Observation of out-of-plane dispersion in Cd3As2. ( a ) Angle-resolved photoemission spectroscopy (ARPES) dispersion maps at various incident photon energies are shown in the first and third rows. First-principle calculated in-plane electronic dispersion at different kz values near the three-dimensional (3D) Dirac node k 0 is plotted in the second and forth rows. ( b ) ARPES measured out-of-plane linear E  kz dispersion. ( c ) ARPES measured in-plane E  kx dispersion. The white dotted lines are guides to the eye tracking the out-of-plane dispersion. ( d ) Theoretically calculated out-of-plane E  kz dispersion near the 3D Dirac node shown over a wider energy window. ( e ) Schematic (cartoon) of the 3D (anisotropic) Dirac semimetal band structure in Cd3As2. ( f ) Spin-integrated ARPES dispersion cut measured on the sample used for spin-resolved measurements. The dotted lines indicate the momentum locations for the spin-resolved energy-dispersive curve cuts. ( g and h ) Spin-resolved ARPES intensity (black and red circles) and measured net spin polarization (blue dots) for cuts 1 and 2. Error bars represent the experimental uncertainties (standard deviation) in determining the spin polarization.
Figure 3 Observation of out-of-plane dispersion in Cd3As2. ( a ) Angle-resolved photoemission spectroscopy (ARPES) dispersion maps at various incident photon energies are shown in the first and third rows. First-principle calculated in-plane electronic dispersion at different kz values near the three-dimensional (3D) Dirac node k 0 is plotted in the second and forth rows. ( b ) ARPES measured out-of-plane linear E kz dispersion. ( c ) ARPES measured in-plane E kx dispersion. The white dotted lines are guides to the eye tracking the out-of-plane dispersion. ( d ) Theoretically calculated out-of-plane E kz dispersion near the 3D Dirac node shown over a wider energy window. ( e ) Schematic (cartoon) of the 3D (anisotropic) Dirac semimetal band structure in Cd3As2. ( f ) Spin-integrated ARPES dispersion cut measured on the sample used for spin-resolved measurements. The dotted lines indicate the momentum locations for the spin-resolved energy-dispersive curve cuts. ( g and h ) Spin-resolved ARPES intensity (black and red circles) and measured net spin polarization (blue dots) for cuts 1 and 2. Error bars represent the experimental uncertainties (standard deviation) in determining the spin polarization.From the PDF
Figure 4 Two- and three-dimensional topological Dirac fermions. ( a ) Angle-resolved photoemission spectroscopy (ARPES) measured surface electronic structure dispersion map of Cd3As2 and its corresponding momentum distribution curves (MDCs). ( b ) ARPES measured surface dispersion map of the prototype topological insulator (TI) Bi2Se3 and its corresponding MDCs. Both spectra are measured with photon energy of 22 eV and at a sample temperature of 15 K. The black arrows show the ARPES intensity peaks in the MDC plots. ( c and d ) ARPES spectra of two Bi-based 3D Dirac semimetals, which are realized by fine tuning the chemical composition to the critical point of a topological phase transition between a normal insulator and a TI: ( c ) TlBi(S 1  d Se d ) 2 ( d ¼ 0.5; see Xu et al. 20 ), and ( d ) (Bi 1  d In d )2Se3 ( d ¼ 0.04; see Brahlek et al. 29 ). Spectrum in c is measured with photon energy of 16 eV and spectrum in d is measured with photon energy of 41 eV. For the 2D topological surface Dirac cone in Bi2Se3, a distinct in-plane ( E B  kx ) dispersion is observed in ARPES, whereas for the 3D bulk Dirac cones in Cd3As2, TlBi(S0.5Se0.5)2 and (Bi0.96In0.04)2Se3, a Dirac-cone-like intensity continuum is also observed.
Figure 4 Two- and three-dimensional topological Dirac fermions. ( a ) Angle-resolved photoemission spectroscopy (ARPES) measured surface electronic structure dispersion map of Cd3As2 and its corresponding momentum distribution curves (MDCs). ( b ) ARPES measured surface dispersion map of the prototype topological insulator (TI) Bi2Se3 and its corresponding MDCs. Both spectra are measured with photon energy of 22 eV and at a sample temperature of 15 K. The black arrows show the ARPES intensity peaks in the MDC plots. ( c and d ) ARPES spectra of two Bi-based 3D Dirac semimetals, which are realized by fine tuning the chemical composition to the critical point of a topological phase transition between a normal insulator and a TI: ( c ) TlBi(S 1 d Se d ) 2 ( d ¼ 0.5; see Xu et al. 20 ), and ( d ) (Bi 1 d In d )2Se3 ( d ¼ 0.04; see Brahlek et al. 29 ). Spectrum in c is measured with photon energy of 16 eV and spectrum in d is measured with photon energy of 41 eV. For the 2D topological surface Dirac cone in Bi2Se3, a distinct in-plane ( E B kx ) dispersion is observed in ARPES, whereas for the 3D bulk Dirac cones in Cd3As2, TlBi(S0.5Se0.5)2 and (Bi0.96In0.04)2Se3, a Dirac-cone-like intensity continuum is also observed.From the PDF
Figure 5 Three-dimensional Dirac semimetal phase. ( a ) Cartoon view of dispersion of 3D Dirac semimetal. ( b ) Schematic view of the Fermi surface above the Dirac point (left panel), at the Dirac point (middle panel) and below the Dirac point (right panel).
Figure 5 Three-dimensional Dirac semimetal phase. ( a ) Cartoon view of dispersion of 3D Dirac semimetal. ( b ) Schematic view of the Fermi surface above the Dirac point (left panel), at the Dirac point (middle panel) and below the Dirac point (right panel).From the PDF

Verification

Claims the paper makes

6 Valid · 0 Not valid · 6 Not checked · 15 Own results and interpretations

8 more claims

Create a free account to see all 27 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 5
  • It may state two separate claims as one. 10

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 47 references

Cited by

Items 801–900 of 1,423

Metadata

Authors
Neupane, M., Xu, S.-Y., Sankar, R., Alidoust, N., Bian, G., Liu, C., Belopolski, I., Chang, T.-R., Jeng, H.-T., Lin, H., Bansil, A., Chou, F., & Hasan, M. Z.
Affiliations
  • Princeton University (US)
  • National Taiwan University (TW)
  • National Tsing Hua University (TW)
  • National University of Singapore (SG)
  • Northeastern University (US)
Corresponding author
Hasan, M. Zahid
Venue
Nature Communications
Published
2014-05-07
Volume
5
Issue
1
Pages
3786-3786
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2046590964
Cited by
1,399
References
48
Citations by year
2026: 39 · 2025: 71 · 2024: 64 · 2023: 101 · 2022: 102 · 2021: 109 · 2020: 118 · 2019: 132 · 2018: 166 · 2017: 174 · 2016: 159 · 2015: 125 · 2014: 37
FWCI
82.02
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion)
  • arXiv (Cornell University) (publishedVersion)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • arXiv (Cornell University)
  • Bulletin of the American Physical Society
Funders
  • U.S. Department of Energy (DEFG0207ER46352, AC03-76SF00098, DE‐FG02‐, DEFG0205ER46200, FG02-07ER46352)
  • Alfred P. Sloan Foundation
  • Princeton University
  • Basic Energy Sciences (DE-FG-02-07ER46352, AC03-76SF00098, DE-FG-02-05ER46200, DE-FG02)
  • Lawrence Berkeley National Laboratory
Topics
  • Physical Sciences › Physics and Astronomy › Condensed Matter Physics › Topological Materials and Phenomena
  • Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
  • Physical Sciences › Physics and Astronomy › Condensed Matter Physics › Advanced Condensed Matter Physics
Keywords
Cd3As2, topological Dirac semimetal, spin-orbit coupling, Dirac cones, Fermi velocity, electronic band structure, Weyl fermions, quantum Hall effect, three-dimensional Dirac semimetal

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.