The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Selective metal deposition at graphene line defects by atomic layer deposition
Open accessAbstract
One-dimensional defects in graphene have a strong influence on its physical properties, such as electrical charge transport and mechanical strength. With enhanced chemical reactivity, such defects may also allow us to selectively functionalize the material and systematically tune the properties of graphene. Here we demonstrate the selective deposition of metal at chemical vapour deposited graphene’s line defects, notably grain boundaries, by atomic layer deposition. Atomic layer deposition allows us to deposit Pt predominantly on graphene’s grain boundaries, folds and cracks due to the enhanced chemical reactivity of these line defects, which is directly confirmed by transmission electron microscopy imaging. The selective functionalization of graphene defect sites, together with the nanowire morphology of deposited Pt, yields a superior platform for sensing applications. Using Pt–graphene hybrid structures, we demonstrate high-performance hydrogen gas sensors at room temperature and show its advantages over other evaporative Pt deposition methods, in which Pt decorates the graphene surface non-selectively. Defects in graphene strongly influence the material's physical properties, leading to the suggestion that defects might be tuned to improve performance. Here, via atomic layer deposition, the authors selectively deposit Pt at graphene line defects and yield a superior platform for sensing applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Toward reliable density functional methods without adjustable parameters: The PBE0 model
Adamo, C., & Barone, V. (1999) · The Journal of Chemical Physics · doi:10.1063/1.478522 · Cited by 19,042
Large-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils
Li, X., Cai, W., An, J., Kim, S., Nah, J., Yang, D., Piner, R., Velamakanni, A., Jung, I., Tutuc, E., et al. (2009) · Science · doi:10.1126/science.1171245 · Cited by 11,220
Large-scale pattern growth of graphene films for stretchable transparent electrodes
Kim, K. S., Zhao, Y., Jang, H., Lee, S. Y., Kim, J. M., Kim, K. S., Ahn, J.-H., Kim, P., Choi, J.-Y., & Hong, B. H. (2009) · Nature · doi:10.1038/nature07719 · Cited by 10,452
Self-citationFully optimized contracted Gaussian basis sets for atoms Li to Kr
Schäfer, A., Horn, H., & Ahlrichs, R. (1992) · The Journal of Chemical Physics · doi:10.1063/1.463096 · Cited by 9,610
Fully optimized contracted Gaussian basis sets of triple zeta valence quality for atoms Li to Kr
Schäfer, A., Huber, C., & Ahlrichs, R. (1994) · The Journal of Chemical Physics · doi:10.1063/1.467146 · Cited by 9,169
Energy-adjustedab initio pseudopotentials for the second and third row transition elements
Andrae, D., Häußermann, U., Dolg, M., Stoll, H., & Preuß, H. (1990) · Theoretica chimica acta · doi:10.1007/bf01114537 · Cited by 8,546
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
Self-citation
Cited by
Two‐Dimensional Nanostructured Materials for Gas Sensing
Liu, X., Ma, T., Pinna, N., & Zhang, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702168 · Cited by 851
A Theory/Experience Description of Support Effects in Carbon-Supported Catalysts
Gerber, I. C., & Serp, P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00209 · Cited by 736
Bottom-up precise synthesis of stable platinum dimers on graphene
Yan, H., Lin, Y., Wu, H., Zhang, W., Sun, Z., Cheng, H., Liu, W., Wang, C., Li, J., Huang, X., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-01259-z · Cited by 633
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Defects in Graphene: Generation, Healing, and Their Effects on the Properties of Graphene: A Review
Liu, L., Qing, M., Wang, Y., & Chen, S. (2015) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2014.11.019 · Cited by 432
Jeong, S., Kim, J., & Lee, J. (2020) · Advanced Materials · doi:10.1002/adma.202002075 · Cited by 415
The Chemistry and Promising Applications of Graphene and Porous Graphene Materials
Huang, H., Shi, H., Das, P., Qin, J., Li, Y., Wang, X., Su, F., Wen, P., Li, S., Lu, P., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909035 · Cited by 388
Supported Noble‐Metal Single Atoms for Heterogeneous Catalysis
Li, X., Yang, X., Huang, Y., Zhang, T., & Liu, B. (2019) · Advanced Materials · doi:10.1002/adma.201902031 · Cited by 372
Single‐Atom Catalysts in Catalytic Biomedicine
Xiang, H., Feng, W., & Chen, Y. (2020) · Advanced Materials · doi:10.1002/adma.201905994 · Cited by 368
2D Materials in Flexible Electronics: Recent Advances and Future Prospectives
Katiyar, A. K., Hoang, A. T., Xu, D., Hong, J., Kim, B. J., Ji, S., & Ahn, J.-H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00302 · Cited by 363
Area-Selective Deposition: Fundamentals, Applications, and Future Outlook
Parsons, G. N., & Clark, R. D. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c00722 · Cited by 360
Single-Atom Catalysts Designed and Prepared by the Atomic Layer Deposition Technique
Fonseca, J., & Lu, J. (2021) · ACS Catalysis · doi:10.1021/acscatal.1c01200 · Cited by 344
Hadadian, M., Correa‐Baena, J., Goharshadi, E. K., Ummadisingu, A., Seo, J., Luo, J., Gholipour, S., Zakeeruddin, S. M., Saliba, M., Abate, A., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602785 · Cited by 327
Recent Progress in Graphene‐Based Noble‐Metal Nanocomposites for Electrocatalytic Applications
Liu, J., Ma, Q., Huang, Z., Liu, G., & Zhang, H. (2019) · Advanced Materials · doi:10.1002/adma.201800696 · Cited by 326
Stitching h-BN by atomic layer deposition of LiF as a stable interface for lithium metal anode
Xie, J., Liao, L., Gong, Y., Li, Y., Shi, F., Pei, A., Sun, J., Zhang, R., Kong, B., Subbaraman, R., et al. (2017) · Science Advances · doi:10.1126/sciadv.aao3170 · Cited by 308
Atomic Layer Deposition on 2D Materials
Kim, H. G., & Lee, H.-B.-R. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05103 · Cited by 303
Self-citationLi, W., Wang, F., Liu, Y., Wang, J., Yang, J., Zhang, L., Elzatahry, A. A., Al-Dahyan, D., Xia, Y., & Zhao, D. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00291 · Cited by 282
Cheng, N., Banis, M. N., Liu, J., Riese, A., Li, X., Li, R., Ye, S., Knights, S., & Sun, X. (2015) · Advanced Materials · doi:10.1002/adma.201404314 · Cited by 279
Metadata
- Authors
- Kim, K., Lee, H.-B.-R., Johnson, R. W., Tanskanen, J. T., Liu, N., Kim, M.-G., Pang, C., Ahn, C., Bent, S. F., & Bao, Z.
- Venue
- Nature Communications
- Published
- 2014-09-02
- Volume
- 5
- Issue
- 1
- Pages
- 4781-4781
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2008827207
- Cited by
- 305
- References
- 61
- FWCI
- 13.25
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.