The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Semiconductor/relaxor 0–3 type composites without thermal depolarization in Bi0.5Na0.5TiO3-based lead-free piezoceramics
Open accessAbstract
Commercial lead-based piezoelectric materials raised worldwide environmental concerns in the past decade. Bi0.5Na0.5TiO3-based solid solution is among the most promising lead-free piezoelectric candidates; however, depolarization of these solid solutions is a longstanding obstacle for their practical applications. Here we use a strategy to defer the thermal depolarization, even render depolarization-free Bi0.5Na0.5TiO3-based 0–3-type composites. This is achieved by introducing semiconducting ZnO particles into the relaxor ferroelectric 0.94Bi0.5Na0.5TiO3–0.06BaTiO3 matrix. The depolarization temperature increases with increasing ZnO concentration until depolarization disappears at 30 mol% ZnO. The semiconducting nature of ZnO provides charges to partially compensate the ferroelectric depolarization field. These results not only pave the way for applications of Bi0.5Na0.5TiO3-based piezoceramics, but also have great impact on the understanding of the mechanism of depolarization so as to provide a new design to optimize the performance of lead-free piezoelectrics. Piezoelectric materials are used as sensors or actuators in many devices. Here, the authors demonstrate that semiconducting ZnO particles embedded into a Bi0.5Na0.5TiO3-based matrix improve its piezoelectric properties, promising an alternative to presently used lead-based materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Saito, Y., Takao, H., Tani, T., Nonoyama, T., Takatori, K., Homma, T., Nagaya, T., & Nakamura, M. (2004) · Nature · doi:10.1038/nature03028 · Cited by 5,475
Perspective on the Development of Lead‐free Piezoceramics
Rödel, J., Jo, W., Seifert, K. T. P., Anton, E., Granzow, T., & Damjanovic, D. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03061.x · Cited by 2,998
Self-citationRecent advances in ZnO materials and devices
Look, D. C. (2001) · Materials Science and Engineering: B · doi:10.1016/s0921-5107(00)00604-8 · Cited by 2,831
Large Piezoelectric Effect in Pb-Free Ceramics
Liu, W., & Ren, X. (2009) · Physical Review Letters · doi:10.1103/physrevlett.103.257602 · Cited by 2,764
Self-citation(Bi1/2Na1/2)TiO3-BaTiO3 System for Lead-Free Piezoelectric Ceramics
Takenaka, T., Kei-ichi Maruyama, K.-I. M., & Koichiro Sakata, K. S. (1991) · Japanese Journal of Applied Physics · doi:10.1143/jjap.30.2236 · Cited by 2,150
Complex and oriented ZnO nanostructures
Tian, Z. R., Voigt, J. A., Liu, J., Mckenzie, B., Mcdermott, M. J., Rodriguez, M. A., Konishi, H., & Xu, H. (2003) · Nature Materials · doi:10.1038/nmat1014 · Cited by 1,454
Current status and prospects of lead-free piezoelectric ceramics
Takenaka, T., & Nagata, H. (2005) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.03.125 · Cited by 868
A glycolipid of hypervirulent tuberculosis strains that inhibits the innate immune response
Reed, M. B., Domenech, P., Manca, C., Su, H., Barczak, A. K., Kreiswirth, B. N., Kaplan, G., & Barry, C. E. (2004) · Nature · doi:10.1038/nature02837 · Cited by 762
Progress in Piezotronics and Piezo‐Phototronics
Wang, Z. L. (2012) · Advanced Materials · doi:10.1002/adma.201104365 · Cited by 735
Current Developments and Prospective of Lead-Free Piezoelectric Ceramics
Takenaka, T., Nagata, H., & Hiruma, Y. (2008) · Japanese Journal of Applied Physics · doi:10.1143/jjap.47.3787 · Cited by 422
Enhanced electromechanical response of ferroelectrics due to charged domain walls
Sluka, T., Tagantsev, A. K., Damjanović, D., Gureev, M. Y., & Setter, N. (2012) · Nature Communications · doi:10.1038/ncomms1751 · Cited by 327
Structural complexity of(Na0.5Bi0.5)TiO3-BaTiO3as revealed by Raman spectroscopy
Wylie-van Eerd, B., Damjanovic, D., Klein, N., Setter, N., & Trodahl, J. (2010) · Physical Review B · doi:10.1103/physrevb.82.104112 · Cited by 303
Atomic-scale mechanisms of ferroelastic domain-wall-mediated ferroelectric switching
Gao, P. D., Britson, J., Jokisaari, J. R., Nelson, C. T., Baek, S., Wang, Y., Eom, C., Chen, L., & Pan, X. Q. (2013) · Nature Communications · doi:10.1038/ncomms3791 · Cited by 218
Lithium-Induced Phase Transitions in Lead-Free Bi 0.5 Na 0.5 TiO 3 Based Ceramics
Viola, G., MKinnon, R., Koval, V., Adomkevicius, A., Dunn, S., & Yan, H. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500609h · Cited by 186
Temperature‐Dependent Electrical Properties of 0.94Bi 0.5 Na 0.5 TiO 3 –0.06BaTiO 3 Ceramics
Zhang, S., Kounga, A. B., Aulbach, E., & Deng, Y. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02778.x · Cited by 179
Self-citationGroh, C., Franzbach, D. J., Jo, W., Webber, K. G., Kling, J., Schmitt, L. A., Kleebe, H., Jeong, S., Lee, J., & Rödel, J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302102 · Cited by 171
Self-citationTakenaka, T., Nagata, H., & Hiruma, Y. (2009) · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2009.1224 · Cited by 139
Hiruma, Y., Nagata, H., & Takenaka, T. (2009) · Applied Physics Letters · doi:10.1063/1.3194146 · Cited by 126
Drift of charged defects in local fields as aging mechanism in ferroelectrics
Genenko, Y. A., & Lupascu, D. C. (2007) · Physical Review B · doi:10.1103/physrevb.75.184107 · Cited by 81
Huo, X., Zhang, S. J., Liu, G., Zhang, R., Luo, J. T., Sahul, R., Cao, W., & Shrout, T. R. (2013) · Journal of Applied Physics · doi:10.1063/1.4792661 · Cited by 68
Self-citationGenenko, Y. A., Glaum, J., Hirsch, O., Kungl, H., Hoffmann, M. J., & Granzow, T. (2009) · Physical Review B · doi:10.1103/physrevb.80.224109 · Cited by 62
(Bi_ Na_ )TiO_3-BaTiO_3 System for Lead-Free Piezoelectric Ceramics : Piezoelectrics
Takenaka, T., Maruyama, K.-I., & Sakata, K. (1991) · Cited by 31
Cited by
BaTiO3-Based Piezoelectrics: Fundamentals, Current Status, and Perspectives
Acosta, M., Novak, N., Rojas, V., Patel, S., Vaish, R., Koruza, J., Rossetti, G. A., & Rödel, J. (2017) · Applied Physics Reviews · doi:10.1063/1.4990046 · Cited by 1,451
Self-citationRecent development in lead-free perovskite piezoelectric bulk materials
Zheng, T., Wu, J., Xiao, D., & Zhu, J. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.06.002 · Cited by 1,078
Progress in high-strain perovskite piezoelectric ceramics
Hao, J., Li, W., Zhai, J., & Chen, H. (2019) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.08.001 · Cited by 840
Emerging new phase boundary in potassium sodium-niobate based ceramics
Lv, X., Zhu, J., Xiao, D., Zhang, X.-X., & Wu, J. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00432g · Cited by 393
Phase structure and properties of sodium bismuth titanate lead-free piezoelectric ceramics
Zhou, X., Xue, G., Luo, H., Bowen, C. R., & Zhang, D. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100836 · Cited by 363
Metadata
- Authors
- Zhang, J., Pan, Z., Guo, F.-F., Liu, W.-C., Ning, H., Chen, Y. B., Lu, M.-H., Yang, B., Chen, J., Zhang, S.-T., Xing, X., Rödel, J., Cao, W., & Chen, Y.-F.
- Venue
- Nature Communications
- Published
- 2015-03-19
- Volume
- 6
- Issue
- 1
- Pages
- 6615-6615
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2000924456
- Cited by
- 384
- References
- 22
- FWCI
- 12.92
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.