CoChat

A porous proton-relaying metal-organic framework material that accelerates electrochemical hydrogen evolution

Open access

The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.

Abstract

The availability of efficient hydrogen evolution reaction (HER) catalysts is of high importance for solar fuel technologies aimed at reducing future carbon emissions. Even though Pt electrodes are excellent HER electrocatalysts, commercialization of large-scale hydrogen production technology requires finding an equally efficient, low-cost, earth-abundant alternative. Here, high porosity, metal-organic framework (MOF) films have been used as scaffolds for the deposition of a Ni-S electrocatalyst. Compared with an MOF-free Ni-S, the resulting hybrid materials exhibit significantly enhanced performance for HER from aqueous acid, decreasing the kinetic overpotential by more than 200 mV at a benchmark current density of 10 mA cm−2. Although the initial aim was to improve electrocatalytic activity by greatly boosting the active area of the Ni-S catalyst, the performance enhancements instead were found to arise primarily from the ability of the proton-conductive MOF to favourably modify the immediate chemical environment of the sulfide-based catalyst.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/ncomms9304

Cites

64 of 64 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Schematic representation. Schematic representation of NU-1000's crystal structure.
Figure 1 Schematic representation. Schematic representation of NU-1000's crystal structure.CC BY · PubMed Central
Figure 2 SEM images of NU-1000_Ni-S films. (a) SEM image of an NU-1000_Ni-S film showing the typical hexagonal rod-shaped crystals of NU-1000 on top of the FTO substrate (scale bar, 1 μm). (b) Cross-sectional SEM image of NU-1000_Ni-S film (scale bar, 2 μm).
Figure 2 SEM images of NU-1000_Ni-S films. (a) SEM image of an NU-1000_Ni-S film showing the typical hexagonal rod-shaped crystals of NU-1000 on top of the FTO substrate (scale bar, 1 μm). (b) Cross-sectional SEM image of NU-1000_Ni-S film (scale bar, 2 μm).CC BY · PubMed Central
Figure 3 Illustration of Ni-S electrodeposition to create the NU-1000_Ni-S hybrid system. The initial aim was to use the MOF as a template for depositing high surface area Ni-S rods (top section). However, Ni-S was deposited as a flat layer (bottom section).
Figure 3 Illustration of Ni-S electrodeposition to create the NU-1000_Ni-S hybrid system. The initial aim was to use the MOF as a template for depositing high surface area Ni-S rods (top section). However, Ni-S was deposited as a flat layer (bottom section).CC BY · PubMed Central
Figure 4 Comparison between the electrocatalytic HER performance. Four types of electrodes: bare FTO (dotted black), FTO_NU-1000 (dotted red), FTO_Ni-S (black) and NU-1000_Ni-S (red). (a) J–V curves. (b) Tafel plots. The listed values of 182 and 188 mV dec−1 for the HER Tafel slopes of the bare FTO and FTO_Ni-S samples refer to the low current density region only. The slopes clearly are larger at higher current densities.
Figure 4 Comparison between the electrocatalytic HER performance. Four types of electrodes: bare FTO (dotted black), FTO_NU-1000 (dotted red), FTO_Ni-S (black) and NU-1000_Ni-S (red). (a) J–V curves. (b) Tafel plots. The listed values of 182 and 188 mV dec−1 for the HER Tafel slopes of the bare FTO and FTO_Ni-S samples refer to the low current density region only. The slopes clearly are larger at higher current densities.CC BY · PubMed Central
Figure 5 Stability analysis of NU-1000_Ni-S under HER working conditions. (a) Galvanostatic electrolysis measurement of NU-1000_Ni-S system under a constant current of 10 mA cm−2, showing the voltage stability of the system for more than 2 h. (b) Powder XRD plots for an NU-1000_Ni-S film before and after galvanostatic electrolysis measurement under a constant current of 10 mA cm−2 for 2 h. The plots show that framework crystallinity is retained.
Figure 5 Stability analysis of NU-1000_Ni-S under HER working conditions. (a) Galvanostatic electrolysis measurement of NU-1000_Ni-S system under a constant current of 10 mA cm−2, showing the voltage stability of the system for more than 2 h. (b) Powder XRD plots for an NU-1000_Ni-S film before and after galvanostatic electrolysis measurement under a constant current of 10 mA cm−2 for 2 h. The plots show that framework crystallinity is retained.CC BY · PubMed Central
Figure 6 EIS analysis of the MOF's scaffold impact on the electronic properties of Ni-S. (a) A plot of geometric area normalized charge transfer resistance (Rct) versus applied potential, comparing between FTO_NiS and NU-1000_Ni-S electrodes. (b) A plot of electroactive surface area normalized Rct versus applied potential, exhibiting similar Rct values for both FTO_Ni-S and NU-1000_Ni-S electrodes. (c) A plot of double-layer capacitive current versus CV scan rate. The slope of each curve is relative to the amount of electroactive surface area of the system.
Figure 6 EIS analysis of the MOF's scaffold impact on the electronic properties of Ni-S. (a) A plot of geometric area normalized charge transfer resistance (Rct) versus applied potential, comparing between FTO_NiS and NU-1000_Ni-S electrodes. (b) A plot of electroactive surface area normalized Rct versus applied potential, exhibiting similar Rct values for both FTO_Ni-S and NU-1000_Ni-S electrodes. (c) A plot of double-layer capacitive current versus CV scan rate. The slope of each curve is relative to the amount of electroactive surface area of the system.CC BY · PubMed Central
Figure 7 Effect of Zr6 based node's terminal –OH and –OH2 ligands on HER activity. (a) NU-1000's Zr6 based node, containing the terminal –OH and –OH2 ligands (marked in red). (b) Schematic representation of a benzoate-modified NU-1000 Zr6 based node. The benzoate replaces the node's terminal –OH and –OH2 ligands. Omitted, for simplicity, are atoms associated with coordinated linkers.
Figure 7 Effect of Zr6 based node's terminal –OH and –OH2 ligands on HER activity. (a) NU-1000's Zr6 based node, containing the terminal –OH and –OH2 ligands (marked in red). (b) Schematic representation of a benzoate-modified NU-1000 Zr6 based node. The benzoate replaces the node's terminal –OH and –OH2 ligands. Omitted, for simplicity, are atoms associated with coordinated linkers.CC BY · PubMed Central
Figure 8 Effect of Zr6 based node's terminal –OH and –OH2 ligands, J–V curves. Comparison between the catalytic performance of NU-1000_Ni-S (red) and benzoate-modified NU-1000_Ni-S (black). Substitution of the terminal –OH and –OH2 ligands by benzoate ligands significantly reduces the HER catalytic activity of the hybrid film.
Figure 8 Effect of Zr6 based node's terminal –OH and –OH2 ligands, J–V curves. Comparison between the catalytic performance of NU-1000_Ni-S (red) and benzoate-modified NU-1000_Ni-S (black). Substitution of the terminal –OH and –OH2 ligands by benzoate ligands significantly reduces the HER catalytic activity of the hybrid film.CC BY · PubMed Central
Figure 9 Proton conductivity measuremets. Nyquist plots of AC impedance measurements of proton conductivity of (a) NU-1000 in contact with humid air. As exposure time increases, the arc size decreases. (b) Comparison between Nyquist plots of NU-1000 and benzoate-modified NU-1000. The observed large resistance for the benzoate-modified sample is equivalent to low conductivity.
Figure 9 Proton conductivity measuremets. Nyquist plots of AC impedance measurements of proton conductivity of (a) NU-1000 in contact with humid air. As exposure time increases, the arc size decreases. (b) Comparison between Nyquist plots of NU-1000 and benzoate-modified NU-1000. The observed large resistance for the benzoate-modified sample is equivalent to low conductivity.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 64 references

Cited by

Items 101–200 of 288

Metadata

Authors
Hod, I., Deria, P., Bury, W., Mondloch, J. E., Kung, C.-W., So, M., Sampson, M. D., Peters, A. W., Kubiak, C. P., Farha, O. K., & Hupp, J. T.
Affiliations
  • Northwestern University (US)
  • Warsaw University of Technology (PL)
  • University of California San Diego (US)
Corresponding author
  • Farha, Omar K.
  • Hupp, Joseph T.
Venue
Nature Communications
Published
2015-09-14
Volume
6
Issue
1
Pages
8304-8304
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2271796547
Cited by
290
References
64
Citations by year
2026: 11 · 2025: 26 · 2024: 16 · 2023: 23 · 2022: 20 · 2021: 27 · 2020: 36 · 2019: 42 · 2018: 34 · 2017: 28 · 2016: 25 · 2015: 2
FWCI
8.78
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
Funders
  • U.S. Department of Energy (DESC0001059)
  • US-UK Fulbright Commission
  • National Science Council
  • Office of Science (DESC0001059)
  • National Defense Science and Engineering Graduate
  • Multidisciplinary University Research Initiative
  • Basic Energy Sciences (DESC0001059, SC0001059)
  • Air Force Office of Scientific Research (FA9550-, FA9550-10-1-0572)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Chemistry › Inorganic Chemistry › Metal-Organic Frameworks: Synthesis and Applications
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
Keywords
hydrogen evolution reaction, metal-organic frameworks, proton conduction, MOF films, acid electrolysis, overpotential, solar fuels, earth-abundant catalysts

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.