The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications
Open accessAbstract
Semi-transparent perovskite solar cells are highly attractive for a wide range of applications, such as bifacial and tandem solar cells; however, the power conversion efficiency of semi-transparent devices still lags behind due to missing suitable transparent rear electrode or deposition process. Here we report a low-temperature process for efficient semi-transparent planar perovskite solar cells. A hybrid thermal evaporation–spin coating technique is developed to allow the introduction of PCBM in regular device configuration, which facilitates the growth of high-quality absorber, resulting in hysteresis-free devices. We employ high-mobility hydrogenated indium oxide as transparent rear electrode by room-temperature radio-frequency magnetron sputtering, yielding a semi-transparent solar cell with steady-state efficiency of 14.2% along with 72% average transmittance in the near-infrared region. With such semi-transparent devices, we show a substantial power enhancement when operating as bifacial solar cell, and in combination with low-bandgap copper indium gallium diselenide we further demonstrate 20.5% efficiency in four-terminal tandem configuration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Highly efficient and bending durable perovskite solar cells: toward a wearable power source
Kim, B. J., Kim, D. H., Lee, Y.-Y., Shin, H.-W., Han, G. S., Hong, J. S., Mahmood, K., Ahn, T. K., Joo, Y.-C., Hong, K. S., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02441a · Cited by 679
Cited by
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Metal halide perovskites for energy applications
Zhang, W., Eperon, G. E., & Snaith, H. J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.48 · Cited by 1,108
Planar p–n homojunction perovskite solar cells with efficiency exceeding 21.3%
Cui, P., Wei, D., Ji, J., Huang, H., Jia, E., Dou, S., Wang, T., Wang, W., & Li, M. (2019) · Nature Energy · doi:10.1038/s41560-018-0324-8 · Cited by 573
Zhao, D., Chen, C., Wang, C., Junda, M. M., Song, Z., Grice, C. R., Yu, Y., Li, C., Subedi, B., Podraza, N. J., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0278-x · Cited by 552
Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite
Yang, S., Fu, W., Zhang, Z., Chen, H., & Li, C.-Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00366h · Cited by 486
Metadata
- Authors
- Fu, F., Feurer, T., Jäger, T., Avancini, E., Bissig, B., Yoon, S., Buecheler, S., & Tiwari, A. N.
- Venue
- Nature Communications
- Published
- 2015-11-18
- Volume
- 6
- Issue
- 1
- Pages
- 8932-8932
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2263970527
- Cited by
- 491
- References
- 2
- FWCI
- 32.56
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications. https://app.cochat.ai/papers/10.1038/ncomms9932
- The paper
- Fu, F., Feurer, T., Jäger, T., Avancini, E., Bissig, B., Yoon, S., Buecheler, S., & Tiwari, A. N. (2015). Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications. Nature Communications. https://doi.org/10.1038/ncomms9932
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
