The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications
Open accessAbstract
Semi-transparent perovskite solar cells are highly attractive for a wide range of applications, such as bifacial and tandem solar cells; however, the power conversion efficiency of semi-transparent devices still lags behind due to missing suitable transparent rear electrode or deposition process. Here we report a low-temperature process for efficient semi-transparent planar perovskite solar cells. A hybrid thermal evaporation–spin coating technique is developed to allow the introduction of PCBM in regular device configuration, which facilitates the growth of high-quality absorber, resulting in hysteresis-free devices. We employ high-mobility hydrogenated indium oxide as transparent rear electrode by room-temperature radio-frequency magnetron sputtering, yielding a semi-transparent solar cell with steady-state efficiency of 14.2% along with 72% average transmittance in the near-infrared region. With such semi-transparent devices, we show a substantial power enhancement when operating as bifacial solar cell, and in combination with low-bandgap copper indium gallium diselenide we further demonstrate 20.5% efficiency in four-terminal tandem configuration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Cited by
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Metal halide perovskites for energy applications
Zhang, W., Eperon, G. E., & Snaith, H. J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.48 · Cited by 1,108
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Zhao, D., Yu, Y., Wang, C., Liao, W., Shrestha, N., Grice, C. R., Cimaroli, A. J., Guan, L., Ellingson, R. J., Zhu, K., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.18 · Cited by 776
Planar p–n homojunction perovskite solar cells with efficiency exceeding 21.3%
Cui, P., Wei, D., Ji, J., Huang, H., Jia, E., Dou, S., Wang, T., Wang, W., & Li, M. (2019) · Nature Energy · doi:10.1038/s41560-018-0324-8 · Cited by 573
Metal halide perovskite tandem and multiple-junction photovoltaics
Eperon, G. E., Hörantner, M. T., & Snaith, H. J. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0095 · Cited by 556
Zhao, D., Chen, C., Wang, C., Junda, M. M., Song, Z., Grice, C. R., Yu, Y., Li, C., Subedi, B., Podraza, N. J., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0278-x · Cited by 552
Efficient Monolithic Perovskite/Silicon Tandem Solar Cell with Cell Area >1 cm2
Werner, J., Weng, C.-H., Walter, A., Fesquet, L., Seif, J. P., De Wolf, S., Niesen, B., & Ballif, C. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02686 · Cited by 539
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Duong, T., Wu, Y., Shen, H., Peng, J., Fu, X., Jacobs, D., Wang, E., Kho, T. C., Fong, K. C., Stocks, M., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700228 · Cited by 519
Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite
Yang, S., Fu, W., Zhang, Z., Chen, H., & Li, C.-Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00366h · Cited by 486
Bush, K. A., Frohna, K., Prasanna, R., Beal, R. E., Leijtens, T., Swifter, S. A., & McGehee, M. D. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01255 · Cited by 480
New-generation integrated devices based on dye-sensitized and perovskite solar cells
Yun, S., Qin, Y., Uhl, A. R., Vlachopoulos, N., Yin, M., Li, D., Han, X., & Hagfeldt, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03165c · Cited by 478
Transparent Electrodes for Efficient Optoelectronics
Morales‐Masis, M., De Wolf, S., Woods‐Robinson, R., Ager, J. W., & Ballif, C. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600529 · Cited by 462
Perovskite/Silicon Tandem Solar Cells: Marriage of Convenience or True Love Story? – An Overview
Werner, J., Niesen, B., & Ballif, C. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201700731 · Cited by 431
Cost Analysis of Perovskite Tandem Photovoltaics
Li, Z., Zhao, Y., Wang, X., Sun, Y., Zhao, Z., Li, Y., Zhou, H., & Chen, Q. (2018) · Joule · doi:10.1016/j.joule.2018.05.001 · Cited by 429
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Progress, challenges and perspectives in flexible perovskite solar cells
Di Giacomo, F., Fakharuddin, A., Jose, R., & Brown, T. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01137c · Cited by 428
Device stability of perovskite solar cells – A review
Asghar, M. I., Zhang, J., Wang, H., & Lund, P. D. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.003 · Cited by 423
A review on perovskite solar cells (PSCs), materials and applications
Suresh Kumar, N., & Chandra Babu Naidu, K. (2021) · Journal of Materiomics · doi:10.1016/j.jmat.2021.04.002 · Cited by 420
Prospects for metal halide perovskite-based tandem solar cells
Wang, R., Huang, T., Xue, J., Tong, J., Zhu, K., & Yang, Y. (2021) · Nature Photonics · doi:10.1038/s41566-021-00809-8 · Cited by 409
Vapor-Deposited Perovskites: The Route to High-Performance Solar Cell Production?
Ávila, J., Momblona, C., Boix, P. P., Sessolo, M., & Bolink, H. J. (2017) · Joule · doi:10.1016/j.joule.2017.07.014 · Cited by 379
Stable Low‐Bandgap Pb–Sn Binary Perovskites for Tandem Solar Cells
Yang, Z., Rajagopal, A., Chueh, C., Jo, S. B., Liu, B., Zhao, T., & Jen, A. K. ‐. (2016) · Advanced Materials · doi:10.1002/adma.201602696 · Cited by 367
Xue, Q., Xia, R., Brabec, C. J., & Yip, H.-L. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00154e · Cited by 344
Lal, N. N., Dkhissi, Y., Li, W., Hou, Q., Cheng, Y., & Bach, U. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602761 · Cited by 337
Radiation Hardness and Self‐Healing of Perovskite Solar Cells
Lang, F., Nickel, N. H., Bundesmann, J., Seidel, S., Denker, A., Albrecht, S., Brus, V. V., Rappich, J., Rech, B., Landi, G., et al. (2016) · Advanced Materials · doi:10.1002/adma.201603326 · Cited by 316
High-efficiency inverted semi-transparent planar perovskite solar cells in substrate configuration
Fu, F., Feurer, T., Weiss, T. P., Pisoni, S., Avancini, E., Andres, C., Buecheler, S., & Tiwari, A. N. (2016) · Nature Energy · doi:10.1038/nenergy.2016.190 · Cited by 314
Self-citationEfficient Monolithic Perovskite/Perovskite Tandem Solar Cells
Forgács, D., Gil‐Escrig, L., Pérez‐Del‐Rey, D., Momblona, C., Werner, J., Niesen, B., Ballif, C., Sessolo, M., & Bolink, H. J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602121 · Cited by 313
High-Efficiency Silicon Heterojunction Solar Cells: Materials, Devices and Applications
Liu, Y., Li, Y., Wu, Y., Yang, G., Mazzarella, L., Procel-Moya, P., Tamboli, A. C., Weber, K., Boccard, M., Isabella, O., et al. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100579 · Cited by 293
ABX3 Perovskites for Tandem Solar Cells
Anaya, M., Lozano, G., Calvo, M. E., & Míguez, H. (2017) · Joule · doi:10.1016/j.joule.2017.09.017 · Cited by 286
Chen, B., Bai, Y., Yu, Z., Li, T., Zheng, X., Dong, Q., Shen, L., Boccard, M., Gruverman, A., Holman, Z., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601128 · Cited by 284
Powalla, M., Paetel, S., Ahlswede, E., Wuerz, R., Wessendorf, C. D., & Magorian Friedlmeier, T. (2018) · Applied Physics Reviews · doi:10.1063/1.5061809 · Cited by 281
Emerging Semitransparent Solar Cells: Materials and Device Design
Tai, Q., & Yan, F. (2017) · Advanced Materials · doi:10.1002/adma.201700192 · Cited by 262
Shen, H., Duong, T., Peng, J., Jacobs, D., Wu, N., Gong, J., Wu, Y., Karuturi, S. K., Fu, X., Weber, K., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02627g · Cited by 257
Semitransparent Perovskite Solar Cells: From Materials and Devices to Applications
Shi, B., Duan, L., Zhao, Y., Luo, J., & Zhang, X. (2020) · Advanced Materials · doi:10.1002/adma.201806474 · Cited by 253
Li, Y., Lu, Y., Huo, X., Wei, D., Meng, J., Dong, J., Qiao, B., Zhao, S., Xu, Z., & Song, D. (2021) · RSC Advances · doi:10.1039/d1ra03117a · Cited by 108
Metadata
- Authors
- Fu, F., Feurer, T., Jäger, T., Avancini, E., Bissig, B., Yoon, S., Buecheler, S., & Tiwari, A. N.
- Venue
- Nature Communications
- Published
- 2015-11-18
- Volume
- 6
- Issue
- 1
- Pages
- 8932-8932
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2263970527
- Cited by
- 491
- References
- 37
- FWCI
- 32.56
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.