CoChat

Bandwidth limits of luminescent solar concentrators as detectors in free-space optical communication systems

Open access

The DOI matches its Crossref record; 45 of the 46 references it cites were found in a registry or an index.

Abstract

Luminescent solar concentrators (LSCs) have recently emerged as a promising receiver technology in free-space optical communications due to their inherent ability to collect light from a wide field-of-view and concentrate it into small areas, thus leading to high optical gains. Several high-speed communication systems integrating LSCs in their detector blocks have already been demonstrated, with the majority of efforts so far being devoted to maximising the received optical power and the system’s field-of-view. However, LSCs may pose a severe bottleneck on the bandwidth of such communication channels due to the comparably slow timescale of the fluorescence events involved, a situation further aggravated by the inherent reabsorption in these systems, and yet, an in-depth study into such dynamic effects remains absent in the field. To fill this gap, we have developed a comprehensive analytical solution that delineates the fundamental bandwidth limits of LSCs as optical detectors in arbitrary free-space optical links, and establishes their equivalence with simple RC low-pass electrical circuits. Furthermore, we demonstrate a time-domain Monte Carlo simulation platform, an indispensable tool in the multiparameter optimisation of LSC-based receiver systems. Our work offers vital insight into LSC system dynamic behaviour and paves the way to evaluate the technology for a wide range of applications, including visible light communications, high-speed video recording, and real-time biological imaging, to name a few.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41377-020-00444-y

Cites

45 of 45 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Overview of luminescent solar concentrators for optical communications. a Graphic depicting the principle of operation of an LSC-VLC system. Data are transmitted by modulating a source of light, typically LEDs. Light may come from any direction and is collected by fluorescent collectors that concentrate it to a photodiode on their edge. The photodiode converts the optical signal into an electrical signal, which is then processed by the receiver circuits. b At their limits, LSCs can be represented by a simple RC circuit, where Vin is the input and represents the absorbed incident light
Fig. 1 Overview of luminescent solar concentrators for optical communications. a Graphic depicting the principle of operation of an LSC-VLC system. Data are transmitted by modulating a source of light, typically LEDs. Light may come from any direction and is collected by fluorescent collectors that concentrate it to a photodiode on their edge. The photodiode converts the optical signal into an electrical signal, which is then processed by the receiver circuits. b At their limits, LSCs can be represented by a simple RC circuit, where Vin is the input and represents the absorbed incident lightCC BY · PubMed Central
Fig. 2 Impulse response prediction and measurement. a Photograph of Lumogen Red 305- and CsPbBr3-doped LSCs (0.67 × 0.67 × 2cm) under illumination by an ultraviolet lamp. b Diagram showing the experimental setup used to verify the Monte Carlo model. The excitation beam is perpendicular to the long axis of the LSC devices and parallel to the plane of the photodiode. c Time-domain pulse shape of the laser beam directly illuminating the photodiode. d Comparison between simulated (red dashed line) and experimentally derived (blue solid line) impulse responses for a “fast” CsPbBr3-doped LSC (0.67 × 0.67 × 2cm, a = 0.6cm−1). Inset: time-domain pulse shape of the light at the photodiode having passed through the corresponding LSC. e Comparison between simulated (red dashed line) and experimentally derived (blue solid line) impulse responses for “slow” Lumogen Red 305-doped LSCs (0.67 × 0.67 × 2cm, a = 0.5cm−1). Inset: time-domain pulse shape of the light at the photodiode having passed through the corresponding LSC. f Comparison between experimentally derived (blue) and simulated (red) 90–10% impulse response fall times for Lumogen Red 305-doped LSC (0.67 × 0.67 × 2cm) for a range of concentrations (a = 0.06–1.8cm−1). g Comparison between experimentally derived (blue) and simulated (red) 90–10% impulse response fall times for Lumogen Red 305-doped LSCs (a = 0.06cm−1) for a range of device lengths (L = 1–5cm)
Fig. 2 Impulse response prediction and measurement. a Photograph of Lumogen Red 305- and CsPbBr3-doped LSCs (0.67 × 0.67 × 2cm) under illumination by an ultraviolet lamp. b Diagram showing the experimental setup used to verify the Monte Carlo model. The excitation beam is perpendicular to the long axis of the LSC devices and parallel to the plane of the photodiode. c Time-domain pulse shape of the laser beam directly illuminating the photodiode. d Comparison between simulated (red dashed line) and experimentally derived (blue solid line) impulse responses for a “fast” CsPbBr3-doped LSC (0.67 × 0.67 × 2cm, a = 0.6cm−1). Inset: time-domain pulse shape of the light at the photodiode having passed through the corresponding LSC. e Comparison between simulated (red dashed line) and experimentally derived (blue solid line) impulse responses for “slow” Lumogen Red 305-doped LSCs (0.67 × 0.67 × 2cm, a = 0.5cm−1). Inset: time-domain pulse shape of the light at the photodiode having passed through the corresponding LSC. f Comparison between experimentally derived (blue) and simulated (red) 90–10% impulse response fall times for Lumogen Red 305-doped LSC (0.67 × 0.67 × 2cm) for a range of concentrations (a = 0.06–1.8cm−1). g Comparison between experimentally derived (blue) and simulated (red) 90–10% impulse response fall times for Lumogen Red 305-doped LSCs (a = 0.06cm−1) for a range of device lengths (L = 1–5cm)CC BY · PubMed Central
Fig. 3 Analytical solution to impulse response prediction. a Comparison between normalised time curve contributions from simulations (solid line) grouped by the number of fluorescence events, l, compared to the analytical solution of probability density functions for l = 1 (blue), 2 (red), 3 (green), and 4 (black) as a function of time in multiples of τ. b Simulated (points) and fitted (solid lines) for Φγ plotted against the logarithm of αeL for a range of quantum yields: (from top to bottom) QY, Φ = 0.99, 0.69, 0.39, and 0.09. c Dependence of fitting constant β as a function of the ratio of device width to length. d Comparison between simulated (dashed) and analytical (solid) solutions for the impulse response of an example LSC as a function of time. e Deconstruction of the analytical impulse response from d into the contributions from photons that have undergone l absorption events for l = 1, 2, 3, and 4. f Comparison of normalised bandwidths for simulated (blue crosses) and analytically predicted (red circles) for a series of LSCs with varied fluorophore concentrations
Fig. 3 Analytical solution to impulse response prediction. a Comparison between normalised time curve contributions from simulations (solid line) grouped by the number of fluorescence events, l, compared to the analytical solution of probability density functions for l = 1 (blue), 2 (red), 3 (green), and 4 (black) as a function of time in multiples of τ. b Simulated (points) and fitted (solid lines) for Φγ plotted against the logarithm of αeL for a range of quantum yields: (from top to bottom) QY, Φ = 0.99, 0.69, 0.39, and 0.09. c Dependence of fitting constant β as a function of the ratio of device width to length. d Comparison between simulated (dashed) and analytical (solid) solutions for the impulse response of an example LSC as a function of time. e Deconstruction of the analytical impulse response from d into the contributions from photons that have undergone l absorption events for l = 1, 2, 3, and 4. f Comparison of normalised bandwidths for simulated (blue crosses) and analytically predicted (red circles) for a series of LSCs with varied fluorophore concentrationsCC BY · PubMed Central
Fig. 4 Communication system demonstration. a The measured Q-factor of the link as a function of data rate for the three samples tested. Each of the Q-factors shows a similar profile: an initial increase due to the penalty caused by the coupling capacitors at the transmitter and receiver46 followed by a peak, and then consistent degradation due to the low level of light recovered from the devices and its ratio to the noise equivalent power of the photodetector. Nevertheless, to show the performance of the devices under test, we illustrate the eye diagrams for b sample A at 20 Mb/s, c sample B at 15 Mb/s, and d sample C at 16Mb/s. Each of these clearly shows a clear eye opening at the centre point of the symbol period and a high degree of symmetry within both rise and fall times
Fig. 4 Communication system demonstration. a The measured Q-factor of the link as a function of data rate for the three samples tested. Each of the Q-factors shows a similar profile: an initial increase due to the penalty caused by the coupling capacitors at the transmitter and receiver46 followed by a peak, and then consistent degradation due to the low level of light recovered from the devices and its ratio to the noise equivalent power of the photodetector. Nevertheless, to show the performance of the devices under test, we illustrate the eye diagrams for b sample A at 20 Mb/s, c sample B at 15 Mb/s, and d sample C at 16Mb/s. Each of these clearly shows a clear eye opening at the centre point of the symbol period and a high degree of symmetry within both rise and fall timesCC BY · PubMed Central
Fig. 5 Effects of luminescent solar concentrator parameters on impulse response. a (Black solid line) simulated external optical efficiency, ηext, as a function of the logarithm of the absorption coefficient of the devices for fixed device parameters. (Red dashed line) simulated fall time of the impulse response of devices as a function of the logarithm of the absorption coefficient. b (Black solid line) simulated external optical efficiency, ηext, as a function of quantum yield for a Lumogen Red 305-doped device with fixed concentration and dimensions. (Red dashed line) simulated fall time of the impulse response as a function of quantum yield
Fig. 5 Effects of luminescent solar concentrator parameters on impulse response. a (Black solid line) simulated external optical efficiency, ηext, as a function of the logarithm of the absorption coefficient of the devices for fixed device parameters. (Red dashed line) simulated fall time of the impulse response of devices as a function of the logarithm of the absorption coefficient. b (Black solid line) simulated external optical efficiency, ηext, as a function of quantum yield for a Lumogen Red 305-doped device with fixed concentration and dimensions. (Red dashed line) simulated fall time of the impulse response as a function of quantum yieldCC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 45 references

Research works printed but not linked: 2

  1. DeGroot, M. H. & Schervish, M. J. Probability and Statistics 4th edn (Pearson Education, Upper Saddle River, NJ, 2013).
  2. Shinar, R. & Shinar, J. Organic Electronics in Sensors and Biotechnology (McGraw-Hill, New York, 2009).

Cited by

See all 105

Metadata

Authors
Portnoi, M., Haigh, P. A., Macdonald, T. J., Ambroz, F., Parkin, I. P., Darwazeh, I., & Papakonstantinou, I.
Affiliations
  • University College London (GB)
  • Newcastle University (GB)
Corresponding author
Papakonstantinou, Ioannis
Venue
Light: Science & Applications
Published
2021-01-01
Volume
10
Issue
1
Pages
3-3
ISSN
2047-7538 (ISSN-L)
OpenAlex
W3116847863
Cited by
93
References
46
Citations by year
2026: 7 · 2025: 19 · 2024: 17 · 2023: 19 · 2022: 21 · 2021: 10
FWCI
4.93
Type
journal article
Language
en
Open access
Licence
Locations
  • Light Science & Applications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, other-oa)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • UCL Discovery (University College London) (submittedVersion)
  • Spiral (Imperial College London) (submittedVersion, cc-by)
  • Newcastle University ePrints (Newcastle Univesity) (cc-by)
Funders
  • Research Councils UK (EP/P006280/1, 1632762)
  • Royal Commission for the Exhibition of 1851
  • Horizon 2020 Framework Programme
  • Engineering and Physical Sciences Research Council (EP/P006280/1, H2020, 1632762)
  • H2020 European Research Council (679891, H2020)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Optical Wireless Communication Technologies
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Photochemistry and Electron Transfer Studies
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Random lasers and scattering media
Keywords
luminescent solar concentrators, free-space optical communication, fluorescence dynamics, reabsorption, visible light communication

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Bandwidth limits of luminescent solar concentrators as detectors in free-space optical communication systems. https://app.cochat.ai/papers/10.1038/s41377-020-00444-y
The paper
Portnoi, M., Haigh, P. A., Macdonald, T. J., Ambroz, F., Parkin, I. P., Darwazeh, I., & Papakonstantinou, I. (2021). Bandwidth limits of luminescent solar concentrators as detectors in free-space optical communication systems. Light: Science & Applications. https://doi.org/10.1038/s41377-020-00444-y

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.