Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 52 of the 53 references it cites were found in a registry or an index.

Ultralow-loss geometric phase and polarization shaping by ultrafast laser writing in silica glass

Open access
Sakakura, Masaaki, Lei, Yuhao, Wang, Lei, Yu, Yan-Hao, Kazansky, Peter G. · 2020 · Light: Science & Applications

Abstract

Polarization and geometric phase shaping via a space-variant anisotropy has attracted considerable interest for fabrication of flat optical elements and generation of vector beams with applications in various areas of science and technology. Among the methods for anisotropy patterning, imprinting of self-assembled nanograting structures in silica glass by femtosecond laser writing is promising for the fabrication of space-variant birefringent optics with high thermal and chemical durability and high optical damage threshold. However, a drawback is the optical loss due to the light scattering by nanograting structures, which has limited the application. Here, we report a new type of ultrafast laser-induced modification in silica glass, which consists of randomly distributed nanopores elongated in the direction perpendicular to the polarization, providing controllable birefringent structures with transmittance as high as 99% in the visible and near-infrared ranges and >90% in the UV range down to 330 nm. The observed anisotropic nanoporous silica structures are fundamentally different from the femtosecond laser-induced nanogratings and conventional nanoporous silica. A mechanism of nanocavitation via interstitial oxygen generation mediated by multiphoton and avanlanche defect ionization is proposed. We demonstrate ultralow-loss geometrical phase optical elements, including geometrical phase prism and lens, and a vector beam convertor in silica glass.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41377-020-0250-y

Cites

52 of 52 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Laser writing of birefringence structures inside silica glass. a Illustration of patterning of birefringence in silica glass by femtosecond laser direct writing. b and c Birefringence and transmission optical microscope images of birefringence structures with high-loss (type II) and low-loss modifications (type X), respectively. To obtain comparable retardance, one birefringent layer was written for b, while 10 birefringent layers were written for c. The colour scale in b indicates the slow axis of the birefringence. d Photograph of birefringent optics imprinted with high-loss (left) and low-loss (right) modifications in silica glass plates. e Transmission spectra of birefringent structures of high-loss (red dashed line) and low-loss (blue solid line) modifications with reference to pristine silica glass. The vertical dotted line indicates a wavelength of 330 nm, at which the transmission for the low-loss modification is 90%. The inset shows the transmission spectra of the low-loss modification (blue solid line) and pristine silica glass (green dashed line)
Fig. 1 Laser writing of birefringence structures inside silica glass. a Illustration of patterning of birefringence in silica glass by femtosecond laser direct writing. b and c Birefringence and transmission optical microscope images of birefringence structures with high-loss (type II) and low-loss modifications (type X), respectively. To obtain comparable retardance, one birefringent layer was written for b, while 10 birefringent layers were written for c. The colour scale in b indicates the slow axis of the birefringence. d Photograph of birefringent optics imprinted with high-loss (left) and low-loss (right) modifications in silica glass plates. e Transmission spectra of birefringent structures of high-loss (red dashed line) and low-loss (blue solid line) modifications with reference to pristine silica glass. The vertical dotted line indicates a wavelength of 330 nm, at which the transmission for the low-loss modification is 90%. The inset shows the transmission spectra of the low-loss modification (blue solid line) and pristine silica glass (green dashed line)CC BY · PubMed Central
Fig. 2 Microstructures of birefringent modifications written with different numbers of pulses. a SEM images of the polished surfaces of modifications written by laser irradiation (300 fs, 0.7 μJ) with different pulse numbers (Np). b and c Retardance and optical transmission images of laser-induced modifications with different pulse numbers, respectively. The red colour in b means that the slow axis of the induced birefringence is parallel to the horizontal direction. In the transmission images, the modification was visible at Np ≥ 200, and elongation of the modification was observed at Np = 400
Fig. 2 Microstructures of birefringent modifications written with different numbers of pulses. a SEM images of the polished surfaces of modifications written by laser irradiation (300 fs, 0.7 μJ) with different pulse numbers (Np). b and c Retardance and optical transmission images of laser-induced modifications with different pulse numbers, respectively. The red colour in b means that the slow axis of the induced birefringence is parallel to the horizontal direction. In the transmission images, the modification was visible at Np ≥ 200, and elongation of the modification was observed at Np = 400CC BY · PubMed Central
Fig. 3 Birefringence and transmission of laser written patterns with different parameters. a and c Retardance (left) and transmission (right) images of birefringent structures written at different pulse densities and pulse durations, respectively. In c, the polarization was rotated during laser writing. b and d Plots of the retardance (blue circles) and transmittance (red squares) of the modified regions in a and c against the pulse density and pulse duration, respectively. In d, the ranges of the pulse duration for different modification types are indicated by different colours. e Retardance distribution in the area of birefringent structures written with different pulse durations. f Retardance plotted along the dashed line in e, where stress is formed between the laser written structures. g Refractive index change in the modified regions written with different pulse durations (Section 3 of Supplementary). The refractive index was measured using a phase imaging camera. Δnunpol, Δn0°,o and Δn90°,e are the refractive index changes measured with unpolarized light and with horizontally (0°) and vertically (90°) polarized light. The slow axis of birefringence in the modified region is horizontal (0°). The small difference of Δn0°,o > Δn90°,e at a shorter pulse duration is due to stress-induced birefringence
Fig. 3 Birefringence and transmission of laser written patterns with different parameters. a and c Retardance (left) and transmission (right) images of birefringent structures written at different pulse densities and pulse durations, respectively. In c, the polarization was rotated during laser writing. b and d Plots of the retardance (blue circles) and transmittance (red squares) of the modified regions in a and c against the pulse density and pulse duration, respectively. In d, the ranges of the pulse duration for different modification types are indicated by different colours. e Retardance distribution in the area of birefringent structures written with different pulse durations. f Retardance plotted along the dashed line in e, where stress is formed between the laser written structures. g Refractive index change in the modified regions written with different pulse durations (Section 3 of Supplementary). The refractive index was measured using a phase imaging camera. Δnunpol, Δn0°,o and Δn90°,e are the refractive index changes measured with unpolarized light and with horizontally (0°) and vertically (90°) polarized light. The slow axis of birefringence in the modified region is horizontal (0°). The small difference of Δn0°,o > Δn90°,e at a shorter pulse duration is due to stress-induced birefringenceCC BY · PubMed Central
Fig. 4 Simulation of optical properties of the low-loss birefringent modification. a Model for calculation of the birefringence. Oblate nanopores are distributed in silica glass. k indicates the light propagation direction for evaluation of the birefringence. b Plot of the birefringence (nyy − nxx) against the volume fraction of nanopores with different aspect ratios (dy/dx). c Optical transmission spectra of silica glass with nanopores of different diameters simulated based on Rayleigh scattering. The volume fraction of nanopores for the simulation is f = 0.005, and the thickness of the volume in which nanopores are formed is 400 μm, which is the same as that of the birefringent structure in Fig. 1c
Fig. 4 Simulation of optical properties of the low-loss birefringent modification. a Model for calculation of the birefringence. Oblate nanopores are distributed in silica glass. k indicates the light propagation direction for evaluation of the birefringence. b Plot of the birefringence (nyy − nxx) against the volume fraction of nanopores with different aspect ratios (dy/dx). c Optical transmission spectra of silica glass with nanopores of different diameters simulated based on Rayleigh scattering. The volume fraction of nanopores for the simulation is f = 0.005, and the thickness of the volume in which nanopores are formed is 400 μm, which is the same as that of the birefringent structure in Fig. 1cCC BY · PubMed Central
Fig. 5 Geometric phase (GP) optical elements and vector beam converter imprinted with the low-loss birefringent modification. a Birefringence image of a GP prism with a slow axis gradient of 0.01 πrad μm−1 (upper), and light intensity patterns of 457 nm CW laser beams with different circular polarizations diffracted by the GP prism (lower). b Birefringence image of a GP lens, and intensity patterns of 488 nm CW laser beams with different circular polarizations focused and defocused by the GP lens. The focal lengths are ±208 mm for the wavelength of 488 nm. c Ten-millimetre vector beam converter without (left) and with (middle) a polarizer under linearly polarized white light illumination. The slow axis distribution in the central part of the converter is shown on the right. d Intensity pattern of a 343 nm laser beam after the converter without a polarizer (left). Intensity patterns of the radial (middle) and azimuthal (right) vector beams produced by the converter after a polarizer
Fig. 5 Geometric phase (GP) optical elements and vector beam converter imprinted with the low-loss birefringent modification. a Birefringence image of a GP prism with a slow axis gradient of 0.01 πrad μm−1 (upper), and light intensity patterns of 457 nm CW laser beams with different circular polarizations diffracted by the GP prism (lower). b Birefringence image of a GP lens, and intensity patterns of 488 nm CW laser beams with different circular polarizations focused and defocused by the GP lens. The focal lengths are ±208 mm for the wavelength of 488 nm. c Ten-millimetre vector beam converter without (left) and with (middle) a polarizer under linearly polarized white light illumination. The slow axis distribution in the central part of the converter is shown on the right. d Intensity pattern of a 343 nm laser beam after the converter without a polarizer (left). Intensity patterns of the radial (middle) and azimuthal (right) vector beams produced by the converter after a polarizerCC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 53 references

Cited by

See all 273

Metadata

Authors
Sakakura, M., Lei, Y., Wang, L., Yu, Y.-H., & Kazansky, P. G.
Affiliations
University of Southampton (GB)
Corresponding author
  • Sakakura, Masaaki
  • Wang, Lei
Venue
Light: Science & Applications
Published
2020-02-04
Volume
9
Issue
1
Pages
15-15
ISSN
2047-7538 (ISSN-L)
OpenAlex
W3004472751
Cited by
265
References
53
Citations by year
2026: 41 · 2025: 42 · 2024: 46 · 2023: 58 · 2022: 35 · 2021: 30 · 2020: 13
FWCI
20.99
Type
journal article
Language
en
Open access
Licence
Locations
  • Light Science & Applications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • ePrints Soton (University of Southampton) (acceptedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Topics
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Laser-Matter Interactions and Applications
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Metamaterials and Metasurfaces Applications
Keywords
Berry phase, polarization shaping, ultrafast laser writing, fused silica, nanoporous silica, nanogratings, optical loss, vector beams, interstitial oxygen, multiphoton ionization, avalanche ionization, femtosecond laser modification, optical components

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Ultralow-loss geometric phase and polarization shaping by ultrafast laser writing in silica glass. https://app.cochat.ai/papers/10.1038/s41377-020-0250-y
The paper
Sakakura, M., Lei, Y., Wang, L., Yu, Y.-H., & Kazansky, P. G. (2020). Ultralow-loss geometric phase and polarization shaping by ultrafast laser writing in silica glass. Light: Science & Applications. https://doi.org/10.1038/s41377-020-0250-y

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.