The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Additive manufacturing of self-healing elastomers
Open accessAbstract
Nature excels in both self-healing and 3D shaping; for example, self-healable human organs feature functional geometries and microstructures. However, tailoring man-made self-healing materials into complex structures faces substantial challenges. Here, we report a paradigm of photopolymerization-based additive manufacturing of self-healable elastomer structures with free-form architectures. The paradigm relies on a molecularly designed photoelastomer ink with both thiol and disulfide groups, where the former facilitates a thiol-ene photopolymerization during the additive manufacturing process and the latter enables a disulfide metathesis reaction during the self-healing process. We find that the competition between the thiol and disulfide groups governs the photocuring rate and self-healing efficiency of the photoelastomer. The self-healing behavior of the photoelastomer is understood with a theoretical model that agrees well with the experimental results. With projection microstereolithography systems, we demonstrate rapid additive manufacturing of single- and multimaterial self-healable structures for 3D soft actuators, multiphase composites, and architected electronics. Compatible with various photopolymerization-based additive manufacturing systems, the photoelastomer is expected to open promising avenues for fabricating structures where free-form architectures and efficient self-healing are both desirable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Hydraulically amplified self-healing electrostatic actuators with muscle-like performance
Acome, E., Mitchell, S. K., Morrissey, T. G., Emmett, M. B., Benjamin, C., King, M., Radakovitz, M., & Keplinger, C. (2018) · Science · doi:10.1126/science.aao6139 · Cited by 1,072
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Reprocessable thermosets for sustainable three-dimensional printing
Zhang, B., Kowsari, K., Serjouei, A., Dunn, M. L., & Ge, Q. (2018) · Nature Communications · doi:10.1038/s41467-018-04292-8 · Cited by 398
Interfacial self-healing of nanocomposite hydrogels: Theory and experiment
Wang, Q., Gao, Z., & Yu, K. (2017) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.08.004 · Cited by 38
Self-citation
Cited by
Intrinsically Self-Healing Polymers: From Mechanistic Insight to Current Challenges
Li, B., Cao, P.-F., Saito, T., & Sokolov, A. P. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00575 · Cited by 571
Projection micro stereolithography based 3D printing and its applications
Ge, Q., Li, Z., Wang, Z., Kowsari, K., Zhang, W., He, X., Zhou, J., & Fang, N. X. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab8d9a · Cited by 444
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
3D Printing Materials for Soft Robotics
Sachyani Keneth, E., Kamyshny, A., Totaro, M., Beccai, L., & Magdassi, S. (2021) · Advanced Materials · doi:10.1002/adma.202003387 · Cited by 356
Metadata
- Authors
- Yu, K., Xin, A., Du, H., Li, Y., & Wang, Q.
- Venue
- NPG Asia Materials
- Published
- 2019-02-01
- Volume
- 11
- Issue
- 1
- ISSN
- 1884-4049 (ISSN-L)
- 1884-4057
- OpenAlex
- W2912720184
- Cited by
- 167
- References
- 6
- FWCI
- 8.56
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive manufacturing of self-healing elastomers. https://app.cochat.ai/papers/10.1038/s41427-019-0109-y
- The paper
- Yu, K., Xin, A., Du, H., Li, Y., & Wang, Q. (2019). Additive manufacturing of self-healing elastomers. NPG Asia Materials. https://doi.org/10.1038/s41427-019-0109-y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.