CoChat

Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells

Open access

The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.

Abstract

Manipulation of grain boundaries in polycrystalline perovskite is an essential consideration for both the optoelectronic properties and environmental stability of solar cells as the solution-processing of perovskite films inevitably introduces many defects at grain boundaries. Though small molecule-based additives have proven to be effective defect passivating agents, their high volatility and diffusivity cannot render perovskite films robust enough against harsh environments. Here we suggest design rules for effective molecules by considering their molecular structure. From these, we introduce a strategy to form macromolecular intermediate phases using long chain polymers, which leads to the formation of a polymer-perovskite composite cross-linker. The cross-linker functions to bridge the perovskite grains, minimizing grain-to-grain electrical decoupling and yielding excellent environmental stability against moisture, light, and heat, which has not been attainable with small molecule defect passivating agents. Consequently, all photovoltaic parameters are significantly enhanced in the solar cells and the devices also show excellent stability.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-019-08455-z

Cites

57 of 57 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Schematic illustrations of the perovskite film formation and fabrication steps. Perovskite grain growth induced by a conventional small molecular and b macromolecular intermediate phase. c Fabrication steps for the macromolecular intermediate phase-mediated crystal growth of the perovskite film (optical images: transparent adduct film and perovskite film on glass)
Fig. 1 Schematic illustrations of the perovskite film formation and fabrication steps. Perovskite grain growth induced by a conventional small molecular and b macromolecular intermediate phase. c Fabrication steps for the macromolecular intermediate phase-mediated crystal growth of the perovskite film (optical images: transparent adduct film and perovskite film on glass)CC BY · PubMed Central
Fig. 2 Formation of the macromolecular intermediate phase. Fourier transform infrared (FTIR) spectra of synthesized adduct powders of CH3NH3I and PbI2 without (brown) and with the addition of Lewis bases (DMSO (black), EC (red), PC (green), and PPC (blue)). The FTIR spectra for the a N-H stretch (black arrows) and b–d C=O stretch (red arrows) (brown: without Lewis base, black: CH3NH3I·PbI2·DMSO, red: CH3NH3I·PbI2·DMSO·EC, green: CH3NH3I·PbI2·DMSO·PC, and blue solid line: CH3NH3I·PbI2·DMSO·PPC) (inset: chemical structure of b EC, c PC, and d PPC). X-ray diffraction spectra of synthesized e CH3NH3I·PbI2·DMSO and f CH3NH3I·PbI2·DMSO·PPC adduct powder. X-ray diffraction spectra of g CH3NH3PbI3 and h CH3NH3PbI3·PPC perovskite films, Atomic force microscope topographic images of CH3NH3PbI3 i without additive, j with PC, k with PPC (0.1 wt%), and l with PPC (0.3 wt%)
Fig. 2 Formation of the macromolecular intermediate phase. Fourier transform infrared (FTIR) spectra of synthesized adduct powders of CH3NH3I and PbI2 without (brown) and with the addition of Lewis bases (DMSO (black), EC (red), PC (green), and PPC (blue)). The FTIR spectra for the a N-H stretch (black arrows) and b–d C=O stretch (red arrows) (brown: without Lewis base, black: CH3NH3I·PbI2·DMSO, red: CH3NH3I·PbI2·DMSO·EC, green: CH3NH3I·PbI2·DMSO·PC, and blue solid line: CH3NH3I·PbI2·DMSO·PPC) (inset: chemical structure of b EC, c PC, and d PPC). X-ray diffraction spectra of synthesized e CH3NH3I·PbI2·DMSO and f CH3NH3I·PbI2·DMSO·PPC adduct powder. X-ray diffraction spectra of g CH3NH3PbI3 and h CH3NH3PbI3·PPC perovskite films, Atomic force microscope topographic images of CH3NH3PbI3 i without additive, j with PC, k with PPC (0.1 wt%), and l with PPC (0.3 wt%)CC BY · PubMed Central
Fig. 3 Microstructure of the cross-linked perovskite-polymer film. Scanning electron microscopy images of the a CH3NH3PbI3 and b CH3NH3PbI3·PPC film. Transmission electron microscopy (TEM) images of the c cross-linked perovskite grains at lower magnification and d perovskite-polymer composite cross-linker between adjacent grains (highlighted region in Fig. 3c). Inverse Fast Fourier transform (IFFT) images of the region e (1): within the perovskite-polymer bridge (Inset: FFT analysis of (1)) and f (2): boundary of the perovskite-polymer composite cross-linker. g Schematic drawing of macromolecular intermediate phase induced crystallization and inter-grain cross-linking
Fig. 3 Microstructure of the cross-linked perovskite-polymer film. Scanning electron microscopy images of the a CH3NH3PbI3 and b CH3NH3PbI3·PPC film. Transmission electron microscopy (TEM) images of the c cross-linked perovskite grains at lower magnification and d perovskite-polymer composite cross-linker between adjacent grains (highlighted region in Fig. 3c). Inverse Fast Fourier transform (IFFT) images of the region e (1): within the perovskite-polymer bridge (Inset: FFT analysis of (1)) and f (2): boundary of the perovskite-polymer composite cross-linker. g Schematic drawing of macromolecular intermediate phase induced crystallization and inter-grain cross-linkingCC BY · PubMed Central
Fig. 4 Defect passivation by the polymeric Lewis base. a Reflective Fourier transform infrared (FTIR) spectra of the perovskite films without and with various types of Lewis bases (EC, PC, and PPC), b The FTIR spectra of the C=O stretch (black arrows), c Most favorable Pb2+ perovskite surface adsorption configurations of the Lewis bases and their calculated binding energies, d Photoluminescence (PL) (Inset: normalized PL spectra) and e time-resolved PL spectra of perovskite films without and with Lewis bases (Inset: PL lifetimes fitted from the time-resolved PL spectra)
Fig. 4 Defect passivation by the polymeric Lewis base. a Reflective Fourier transform infrared (FTIR) spectra of the perovskite films without and with various types of Lewis bases (EC, PC, and PPC), b The FTIR spectra of the C=O stretch (black arrows), c Most favorable Pb2+ perovskite surface adsorption configurations of the Lewis bases and their calculated binding energies, d Photoluminescence (PL) (Inset: normalized PL spectra) and e time-resolved PL spectra of perovskite films without and with Lewis bases (Inset: PL lifetimes fitted from the time-resolved PL spectra)CC BY · PubMed Central
Fig. 5 Environmental stability and photovoltaic performances. X-ray diffraction spectra of bare CH3NH3PbI3 and CH3NH3PbI3·PPC (0.3 and 5.0 wt%) films against a moisture (relative humidity: 70 ± 5%), b light (AM 1.5G) and c heat (100 ºC), d Photovoltaic parameters of CH3NH3PbI3 perovskite solar cells with the addition of different Lewis bases: short-circuit current density (JSC), open-circuit voltage (VOC), fill factor (FF) and power conversion efficiency (PCE). Each box chart includes the minimum, lower quartile (lower horizontal line), median (middle horizontal line), mean (hollow square), upper quartile (upper horizontal line), maximum, and discrete data, e Current density–voltage (J–V) characteristics and f PCE evolution in ambient conditions as a function of time of CH3NH3PbI3-based solar cells without and with PPC. The error bars represent the standard deviation of the PCE measured from multiple devices for each condition
Fig. 5 Environmental stability and photovoltaic performances. X-ray diffraction spectra of bare CH3NH3PbI3 and CH3NH3PbI3·PPC (0.3 and 5.0 wt%) films against a moisture (relative humidity: 70 ± 5%), b light (AM 1.5G) and c heat (100 ºC), d Photovoltaic parameters of CH3NH3PbI3 perovskite solar cells with the addition of different Lewis bases: short-circuit current density (JSC), open-circuit voltage (VOC), fill factor (FF) and power conversion efficiency (PCE). Each box chart includes the minimum, lower quartile (lower horizontal line), median (middle horizontal line), mean (hollow square), upper quartile (upper horizontal line), maximum, and discrete data, e Current density–voltage (J–V) characteristics and f PCE evolution in ambient conditions as a function of time of CH3NH3PbI3-based solar cells without and with PPC. The error bars represent the standard deviation of the PCE measured from multiple devices for each conditionCC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 57 references

Cited by

See all 604

Metadata

Authors
Han, T.-H., Lee, J.-W., Choi, C., Tan, S., Lee, C., Zhao, Y., Dai, Z., De Marco, N., Lee, S.-J., Bae, S.-H., Yuan, Y., Lee, H. M., Huang, Y., & Yang, Y.
Affiliations
  • California NanoSystems Institute (US)
  • Korea Advanced Institute of Science and Technology (KR)
Corresponding author
Yang, Yang
Venue
Nature Communications
Published
2019-01-31
Volume
10
Issue
1
Pages
520-520
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2914692117
Cited by
588
References
57
Citations by year
2026: 30 · 2025: 72 · 2024: 68 · 2023: 106 · 2022: 96 · 2021: 106 · 2020: 76 · 2019: 33
FWCI
27.95
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • eScholarship (California Digital Library) (submittedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • eScholarship (California Digital Library) (submittedVersion)
  • Seoul National University Open Repository (Seoul National University) (submittedVersion)
Funders
  • National Science Foundation (N00014-17-1-2484, 1509955, FA9550-15-1-0333)
  • Office of Naval Research (N00014-17-1, FA9550-15-1-0333, FA9550, N00014‐17‐1‐2,484, N00014, N00014-17)
  • Division of Electrical, Communications and Cyber Systems (ECCS-EPMD-1509955)
  • Air Force Office of Scientific Research (FA9550-, N00014-17-1-2484, FA9550-15-1-0333, FA9550-15, -15-1-)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
  • Physical Sciences › Materials Science › Materials Chemistry › Ferroelectric and Piezoelectric Materials
Keywords
perovskite solar cells, crosslinking agents, grain boundaries, defect passivation, environmental stability, long-chain polymers, photovoltaic performance

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells. https://app.cochat.ai/papers/10.1038/s41467-019-08455-z
The paper
Han, T.-H., Lee, J.-W., Choi, C., Tan, S., Lee, C., Zhao, Y., Dai, Z., De Marco, N., Lee, S.-J., Bae, S.-H., Yuan, Y., Lee, H. M., Huang, Y., & Yang, Y. (2019). Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells. Nature Communications. https://doi.org/10.1038/s41467-019-08455-z

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.