Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index; 4 of the 26 sources its claims cite were checked for support.

Acceleration of dolomitization by zinc in saline waters

Open access

Abstract

Abstract Dolomite (CaMg(CO 3 ) 2 ) plays a key role in the global carbon cycle. Yet, the chemical mechanisms that catalyze its formation remain an enigma. Here, using batch reactor experiments, we demonstrate an unexpected acceleration of dolomite formation by zinc in saline fluids, reflecting a not uncommon spatial association of dolomite with Mississippi Valley-type ores. The acceleration correlates with dissolved zinc concentration, irrespective of the zinc source tested (ZnCl 2 and ZnO). Moreover, the addition of dissolved zinc counteracts the inhibiting effect of dissolved sulfate on dolomite formation. Integration with previous studies enables us to develop an understanding of the dolomitization pathway. Our findings suggest that the fluids’ high ionic strength and zinc complexation facilitate magnesium ion dehydration, resulting in a dramatic decrease in induction time. This study establishes a previously unrecognized role of zinc in dolomite formation, and may help explain the changes in dolomite abundance through geological time.

Overview

CoChat Summary

## TL;DR

Batch reactor experiments at 200 °C show that dissolved zinc in saline fluids accelerates calcite-to-dolomite replacement, with the effect increasing as zinc concentration rises. Zinc also counteracts sulfate’s inhibiting effect on dolomite formation, suggesting a previously unrecognized catalytic role for Zn in dolomitization.

## Key findings

  • In batch reactor experiments, adding Zn to NaCl–MgCl2–CaCl2 solutions at constant ionic strength significantly accelerated calcite-to-dolomite replacement, with greater acceleration at higher Zn concentrations tested.
  • For the main experiment series, Avrami fits gave an induction time of 10.5 h and rate constant 3.9 × 10−5 s−1 for the control, versus 4.5 h and 7.6 × 10−5 s−1 with ZnCl2; the ZnO experiments were similar, with 4.5 h induction time and 7.2 × 10−5 s−1 rate constant.
  • The paper reports that Zn still had a significant accelerating effect in experiments containing dissolved sulfate, despite sulfate’s known inhibitory effect on dolomite formation.
  • PXRD showed a three-stage pathway: induction, calcite-to-protodolomite conversion, and protodolomite recrystallization to well-ordered dolomite; products included traces of brucite in controls and simonkolleite in Zn-bearing runs.

## Methods

  • Calcite-to-dolomite replacement batch reactor experiments were run at 200 °C in Teflon-lined steel reactors, reacting 200 mg calcite with 15 ml saline solutions.
  • Two main solution sets were used: Zn-free controls and Zn-bearing fluids with either ZnCl2 or ZnO; additional runs tested Zn in the presence of sulfate. Reaction times ranged from 1 h to 72 h, with sampling intervals of 1 h, 4 h, or across specified time series.
  • Mineralogy and chemistry of products were analyzed by PXRD, SEM/EDS, ICP-OES, and BET surface area analysis; reaction extent was quantified from calcite/dolomite abundances and checked against expected product weight.

## Limitations

  • The paper itself states that whether the findings can be extrapolated to low-temperature conditions is still a question.
  • The experiments were conducted under 200 °C laboratory conditions in simplified saline fluids, so applicability to natural systems at other temperatures or fluid compositions is not directly tested in the paper.
  • It is evident from the text that the work is based on batch reactor experiments, so it does not by itself demonstrate in situ dolomitization in natural settings.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/s41467-019-09870-y

Cites

59 of 59 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Powder X-ray diffractograms (selected 20–70 °2θ) of reaction products in the main experiment series at selected time intervals of 4, 8, and 12 h. The dolomite and calcite characteristic reflections are indicated in a and b, respectively. The peak at 31.7 °2θ in some diffractograms is due to minor halite that was not entirely dissolved during the rinsing process of the product or developed during drying of the samples
Fig. 1 Powder X-ray diffractograms (selected 20–70 °2θ) of reaction products in the main experiment series at selected time intervals of 4, 8, and 12 h. The dolomite and calcite characteristic reflections are indicated in a and b, respectively. The peak at 31.7 °2θ in some diffractograms is due to minor halite that was not entirely dissolved during the rinsing process of the product or developed during drying of the samplesCC BY · PubMed Central
Fig. 2 Powder X-ray diffractogram selected area (34.8-35.8 °2θ) of reaction products. The crystallographic data of the reaction products in the 0.03 M ZnCl2 experiments (a), the 0.03 M ZnO experiments (b), and the Zn-free control series (c) show that only reaction products with more than 90% dolomite contain well-ordered dolomite, giving an indication of the protodolomite to dolomite recrystallization rate. The % dol refers to the percentage of (proto)dolomite as calculated from the main (104) dolomite peak
Fig. 2 Powder X-ray diffractogram selected area (34.8-35.8 °2θ) of reaction products. The crystallographic data of the reaction products in the 0.03 M ZnCl2 experiments (a), the 0.03 M ZnO experiments (b), and the Zn-free control series (c) show that only reaction products with more than 90% dolomite contain well-ordered dolomite, giving an indication of the protodolomite to dolomite recrystallization rate. The % dol refers to the percentage of (proto)dolomite as calculated from the main (104) dolomite peakCC BY · PubMed Central
Fig. 3 Plots of geochemical and mineralogical data of reaction products against reaction time. The geochemical major element concentrations for the reaction products in the 0.03 M ZnCl2 experiments (a) and in the 0.03 M ZnO experiments (b), as well as the relative mineral abundance for the reaction products in the 0.03 M ZnCl2 experiments (c) and in the 0.03 M ZnO experiments (d) demonstrate very similar dolomitization reaction rates which are both accelerated compared to Zn-free solutions. The ZnO (zincite) experiments show dissolution of zincite within the first three hours of the experiment and significantly larger amount of simonkolleite formed in the reaction (d) compared to the ZnCl2 experiments (c)
Fig. 3 Plots of geochemical and mineralogical data of reaction products against reaction time. The geochemical major element concentrations for the reaction products in the 0.03 M ZnCl2 experiments (a) and in the 0.03 M ZnO experiments (b), as well as the relative mineral abundance for the reaction products in the 0.03 M ZnCl2 experiments (c) and in the 0.03 M ZnO experiments (d) demonstrate very similar dolomitization reaction rates which are both accelerated compared to Zn-free solutions. The ZnO (zincite) experiments show dissolution of zincite within the first three hours of the experiment and significantly larger amount of simonkolleite formed in the reaction (d) compared to the ZnCl2 experiments (c)CC BY · PubMed Central
Fig. 4 Calcite-to-dolomite replacement reaction curves. a Reaction curve showing that the addition of 0.2 weight% zinc in the fluids (red curve in comparison with blue curve) halves the time required for dolomitization of calcite at 200 °C. b Small amounts of zinc ions added to solutions of the same ionic strength increase significantly the amount of (proto)dolomite formed within 8 h reaction time. Error bars represent standard deviation of replicate samples
Fig. 4 Calcite-to-dolomite replacement reaction curves. a Reaction curve showing that the addition of 0.2 weight% zinc in the fluids (red curve in comparison with blue curve) halves the time required for dolomitization of calcite at 200 °C. b Small amounts of zinc ions added to solutions of the same ionic strength increase significantly the amount of (proto)dolomite formed within 8 h reaction time. Error bars represent standard deviation of replicate samplesCC BY · PubMed Central
Fig. 5 Avrami plot for dolomitization of calcite at 200 °C. The linear best fit trend lines enable derivation of time exponent and rate constant for the control dolomitization experiments (blue), ZnCl2 dolomitization experiments (red), and ZnO dolomitization experiments (orange)
Fig. 5 Avrami plot for dolomitization of calcite at 200 °C. The linear best fit trend lines enable derivation of time exponent and rate constant for the control dolomitization experiments (blue), ZnCl2 dolomitization experiments (red), and ZnO dolomitization experiments (orange)CC BY · PubMed Central

Verification

Claims the paper makes

4 Valid · 0 Not valid · 16 Not checked · 38 Own results and interpretations

25 more claims

Create a free account to see all 58 claims and to verify the 2 references still open.

See all claims — free account
  • Probably not a substantial claim. 11
  • It may state two separate claims as one. 21

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 58 references

Research works printed but not linked: 1

  1. Paradis, S., Hannigan, P. & Dewing, K. In Mineral Deposits of Canada: A Synthesis of Major Deposit-types, Sitrict Metallogeny, The Evolution of Geological Provinces, and Exploration Methods Vol. 5 (ed Goodfellow, W. D.) 185–203 (Geological Association of Canada, Mineral Deposits Division, Special Publication, 2007).

Cited by

See all 55

Metadata

Authors
Vandeginste, V., Snell, O., Hall, M. R., Steer, E., & Vandeginste, A.
Affiliations
  • University of Nottingham (GB)
  • British Geological Survey (GB)
Corresponding author
Vandeginste, Veerle
Venue
Nature Communications
Published
2019-04-23
Volume
10
Issue
1
Pages
1851-1851
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2942260986
Cited by
54
References
58
Citations by year
2026: 6 · 2025: 13 · 2024: 7 · 2023: 9 · 2022: 7 · 2021: 7 · 2020: 4 · 2019: 1
FWCI
1.24
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Repository@Nottingham (University of Nottingham) (publishedVersion, cc-by)
  • Repository@Nottingham (University of Nottingham) (submittedVersion, cc-by)
  • Lirias (KU Leuven) (submittedVersion, other-oa)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • McMaster University
  • British Geological Survey
  • Engineering and Physical Sciences Research Council (EP/K005138/1, EP/M000567/1)
Topics
  • Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
  • Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
  • Physical Sciences › Earth and Planetary Sciences › Geochemistry and Petrology › Geochemistry and Elemental Analysis
Keywords
dolomitization, dolomite formation, zinc catalysis, saline water, sulfate inhibition, zinc complexation, induction period, carbonate precipitation, carbon cycle

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Acceleration of dolomitization by zinc in saline waters. https://app.cochat.ai/papers/10.1038/s41467-019-09870-y
The paper
Vandeginste, V., Snell, O., Hall, M. R., Steer, E., & Vandeginste, A. (2019). Acceleration of dolomitization by zinc in saline waters. Nature Communications. https://doi.org/10.1038/s41467-019-09870-y

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.