The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Structured multimaterial filaments for 3D printing of optoelectronics
Abstract
Simultaneous 3D printing of disparate materials; metals, polymers and semiconductors with device quality interfaces and at high resolution remains challenging. Moreover, the precise placement of discrete and continuous domains to enable both device performance and electrical connectivity poses barriers to current high-speed 3D-printing approaches. Here, we report filaments with disparate materials arranged in elaborate microstructures, combined with an external adhesion promoter, to enable a wide range of topological outcomes and device-quality interfaces in 3D printed media. Filaments, structured towards light-detection, are printed into fully-connected 3D serpentine and spherical sensors capable of spatially resolving light at micron resolution across its entire centimeter-scale surface. 0-dimensional metallic microspheres generate light-emitting filaments that are printed into hierarchical 3D objects dotted with electroluminescent pixels at high device resolution of 55 µm not restricted by surface tension effects. Structured multimaterial filaments provides a path towards custom three-dimensional functional devices not realizable by existing approaches.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“First, polymers have a wide range of fabrication methods available to them, including methods such as weaving that have traditionally been the provenance of natural materials. Synthetic polymers can also be fabricated using scalable methods such as moulding, extrusion, lamination, deposition, photolithography, milling or newer additive techniques such as 3D printing30,31.”
From End-to-end design of wearable sensors (2022) · cites this paper as [30]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Research works printed but not linked: 48
- Soukoulis, C. M. & Wegener, M. Past achievements and future challenges in the development of three-dimensional photonic metamaterials. Nat. Photon 5, 523–530 (2011). · DOI · Paper page
- Lee, W. et al. Two-dimensional materials in functional three-dimensional architectures with applications in photodetection and imaging. Nat. Comms 9, 1417 (2018). · DOI · Paper page
- Rogers, J., Huang, Y., Schmidt, O. G. & Gracias, D. H. Origami MEMS and NEMS. MRS Bull. 41, 123–129 (2016). · DOI · Paper page
- Song, Z. et al. Origami Lithium-Ion Batteries. Nat. Comms. 5, 3140 (2014). · DOI · Paper page
- Zhang, H., Yu, X. & Braun, P. V. Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes. Nat. Nanotechnol. 6, 277–281 (2011). · DOI · Paper page
- Kim, B. H. et al. Three-dimensional silicon electronic systems fabricated by compressive buckling process. ACS Nano 12, 4164–4171 (2018). · DOI
- Jacobs, H. O. et al. Fabrication of a Cylindrical Display by Patterned Assembly. Science 296, 323–325 (2002). 5566. · DOI · Paper page
- Zhang, Y. et al. Printing, folding and assembly methods for forming 3D mesostructures in advanced materials. Nat. Rev. Mater. 2, 17019 (2017). · DOI · Paper page
- Xu, S. et al. Assembly of micro/nanomaterials into complex, three-dimensional architectures by compressive buckling. Science 347, 154–159 (2015). · DOI · Paper page
- Gracias, D. H., Kavthekar, V., Love, J. C., Paul, K. E. & Whitesides, G. M. Fabrication of micrometer-scale, patterned polyhedra by self-assembly. Adv. Mater. 14, 235–238 (2002). · DOI · Paper page
- Macdonalds, E. & Wicker, R. Multiprocess 3D printing for increasing component functionality. Science 353, 6307 (2016).
- Harada, S., Wataru, H., Takayuki, A., Seiji, A. & Takei, K. Fully printed, highly sensitive multifunctional artificial electronic whisker arrays integrated with strain and temperature sensors. ACS Nano 8, 3921–3927 (2014). · DOI · Paper page
- Truby, R. & Lewis, J. Printing soft matter in three dimensions. Nature 540, 371–378 (2016). · DOI · Paper page
- Lewis, J. A. & Ahn, B. Y. Device fabrication: Three-dimensional printed electronics. Nature 518, 42–43 (2015). · DOI · Paper page
- Saengchairat, N., Tran, T. & Chua, C. K. A review: additive manufacturing for active electronic components. Virtual Phys. Prototyp. 12, 31–46 (2017). · DOI
- Ruiz-Morales, J. C. et al. Three dimensional printing of components and functional devices for energy and environmental applications. Energy Environ. Sci. 10, 846–859 (2017). · DOI · Paper page
- Jakus, A., Taylor, S., Geisendorfer, N., Dunand, D. & Shah, R. Metallic architectures from 3D‐printed powder‐based liquid Inks. Adv. Funct. Mater. 25, 6985–6995 (2015). · DOI · Paper page
- Qiang, F., Saiz, E. & Tomsia, A. Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration. Acta Biomater. 7, 3547–3554 (2011). · DOI · Paper page
- Lewis, J., Smay, J., Stuecker, J. & Cesarano, J. III Direct ink writing of three-dimensional ceramic structures. J. Am. Ceram. Soc. 89, 3599–3609 (2006). · DOI · Paper page
- Arango, M., Abidakun, O., Korakakis, D. & Sierros, K. Tuning the crystalline microstructure of Al-doped ZnO using direct ink writing. Flex. Print. Electron. 2, 035006 (2017). · doi:10.1088/2058-8585/aa8801
- Ebnesajjad, S. & Ebnesajjad, C. Surface treatment of materials for adhesion bonding. (William Andrew, Kidlington, Oxford, 2014).
- Khanna, V. K. Adhesion–delamination phenomena at the surfaces and interfaces in microelectronics and MEMS structures and packaged devices. J. Phys. D. Appl. Phys. 44, 034004 (2011). · doi:10.1088/0022-3727/44/3/034004
- Lu, B.-H., Lan, H.-B. & Liu, H.-Z. Additive manufacturing frontier: 3D printing electronics. Opto-Electron. Adv. 1, 17000401–17000410 (2018). · DOI · Paper page
- Guo, S. Z., Qiu, K., Meng, F., Park, S. H. & McAlpine, M. C. 3D Printed Stretchable Tactile Sensors. Adv. Mater. 29, 1701218 (2017). · DOI · Paper page
- Kong, Y. et al. 3D Printed quantum dot light-emitting diodes. Nano Lett. 14, 7017–7023 (2014). · DOI · Paper page
- Rager, M., Aytug, T., Veith, G. & Joshi, P. Low-thermal-budget photonic processing of highly conductive Cu interconnects based on CuO nanoinks: potential for flexible printed electronics. ACS Appl. Mater. Interfaces 8, 2441–2448 (2016). · doi:10.1021/acsami.5b12156
- Khorramdel, B. et al. Inkjet printing technology for increasing the I/O density of 3D TSV interposers. Microsyst. Nanoeng. 3, 17002 (2017). · doi:10.1038/micronano.2017.2
- Wu, W. Inorganic nanomaterials for printed electronics: a review. Nanoscale 9, 7342–7372 (2017). · DOI · Paper page
- Zhu, C. et al. 3D printed functional nanomaterials for electrochemical energy storage. Nano Today 15, 107–120 (2017). · DOI · Paper page
- Ota, H. et al. 3D Printing: application of 3D printing for smart objects with embedded electronic sensors and systems. Adv. Mater. Technol. 1, 1 (2016).
- Li, J. et al. Hybrid additive manufacturing of 3D electronic systems. J. Micromech. Microeng. 26, 10 (2016).
- Turner, B., Strong, R. & Gold, S. A review of melt extrusion additive manufacturing processes: I. Process design and modelling. Rapid Prototyp. J. 20, 192–204 (2014). · DOI · Paper page
- Rayleigh, L. On the instability of a cylinder of viscous liquid under capillary force. Philos. Mag. J. Sci. 34, 145–154 (1892). · doi:10.1080/14786449208620301
- Kaufman, J. et al. Structured spheres generated by an in-filament fluid instability. Nature 487, 463–467 (2012). · DOI · Paper page
- Zalm, P. The electroluminescence of ZnS type phosphors. Philips Res. Rep. 11, 417–451 (1956).
- Richeton, J., Ahzi, S., Vecchio, K., Jiang, F. & Adharapurapu, R. Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress. Int. J. Solids Struct., 43, 2318–2335 (2006). · DOI · Paper page
- Rein, M. et al. Self-assembled fibre optoelectronics with discrete translational symmetry. Nat. Comms 7, 12807 (2016). · DOI
- Bellehumeur, C., Li, L., Sun, Q. & Gu, P. Modeling of Bond Formation Between Polymer Filament in the Fused Deposition Modeling Process. J. Manuf. Process., 6, 170–178 (2004). · DOI · Paper page
- Javidi, B. & Tekalp, A. M. Emerging 3-D Imaging and Display Technologies. Proc. IEEE 105, 786–788 (2017). · DOI
- Choi, H. M., Hwang, Y. S. & Kim, E. S. Triple-view three-dimensional display based on direct projection integral imaging. OSA Technical Digest, Th4A. 4 (2017). · doi:10.1364/dh.2017.th4a.4
- Sorin, F., Lestoquoy, G., Danto, S., Joannopoulos, J. & Fink, Y. Resolving optical illumination distributions along an axially symmetric photodetecting fiber. Opt. Express 18, 23 (2010). · doi:10.1364/oe.18.024264
- Mueller, E. M., Starnes, S., Strickland, N., Kenny, P. & Williams, C. The detection, inspection, and failure analysis of a composite wing skin defect on a tactical aircraft. Compos. Struct. 145, 186–193 (2016). · doi:10.1016/j.compstruct.2016.02.046
- Al-Fakih, E. A., Abu Osman, N. A. & Mahmad Adikan, F. R. Techniques for interface stress measurements within prosthetic sockets of transtibial amputees: a review of the past 50 years of research. Sens. (Switz.) 16, 1119 (2016). · DOI
- Lamoureux, A., Lee, K., Shlian, M., Forrest, S. R. & Shtein, M. Dynamic kirigami structures for integrated solar tracking. Nat. Commun. 6, 8092 (2015). · DOI · Paper page
- Miller, A. J. et al. Compact cryogenic self-aligning fiber-to-detector coupling with losses below one percent. Opt. Express 19, 9102 (2011). · DOI · Paper page
- Rein, M. et al. Diode fibres for fabric-based optical communications. Nature 560, 214–218 (2018). · DOI · Paper page
- Dahiya, R. S. & Valle, M. Tactile Sensing Technologies in Robotic Tactile Sensing. (Springer, Dordrecht, 2013). · DOI · Paper page
- Yang, G. Z. Implantable Sensors and Systems. (Springer International Publishing, 2018). · DOI
Cited by
End-to-end design of wearable sensors
Ates, H. C., Nguyen, P. Q., Gonzalez-Macia, L., Morales-Narváez, E., Güder, F., Collins, J. J., & Dincer, C. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00460-x · Cited by 1,306
Synaptic devices based neuromorphic computing applications in artificial intelligence
Sun, B., Guo, T., Zhou, G., Ranjan, S., Jiao, Y., Wei, L., Zhou, Y. N., & Wu, Y. A. (2021) · Materials Today Physics · doi:10.1016/j.mtphys.2021.100393 · Cited by 275
Thermally drawn advanced functional fibers: New frontier of flexible electronics
Yan, W., Dong, C., Xiang, Y., Jiang, S., Leber, A., Loke, G., Xu, W., Hou, C., Zhou, S., Chen, M., et al. (2020) · Materials Today · doi:10.1016/j.mattod.2019.11.006 · Cited by 263
Self-citationMultilayered VBC score predicts sgRNAs that efficiently generate loss-of-function alleles
Michlits, G., Jude, J., Hinterndorfer, M., de Almeida, M., Vainorius, G., Hubmann, M., Neumann, T., Schleiffer, A., Burkard, T. R., Fellner, M., et al. (2020) · Nature Methods · doi:10.1038/s41592-020-0850-8 · Cited by 154
Metadata
- Authors
- Loke, G., Yuan, R., Rein, M., Khudiyev, T., Jain, Y., Joannopoulos, J., & Fink, Y.
- Venue
- Nature Communications
- Published
- 2019-09-05
- Volume
- 10
- Issue
- 1
- ISSN
- 2041-1723
- Cited by
- 106
- References
- 1
- Language
- en
- Licence
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structured multimaterial filaments for 3D printing of optoelectronics. https://app.cochat.ai/papers/10.1038/s41467-019-11986-0
- The paper
- Loke, G., Yuan, R., Rein, M., Khudiyev, T., Jain, Y., Joannopoulos, J., & Fink, Y. (2019). Structured multimaterial filaments for 3D printing of optoelectronics. Nature Communications. https://doi.org/10.1038/s41467-019-11986-0
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.