All WSe2 1T1R resistive RAM cell for future monolithic 3D embedded memory integration
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
3D monolithic integration of logic and memory has been the most sought after solution to surpass the Von Neumann bottleneck, for which a low-temperature processed material system becomes inevitable. Two-dimensional materials, with their excellent electrical properties and low thermal budget are potential candidates. Here, we demonstrate a low-temperature hybrid co-integration of one-transistor-one-resistor memory cell, comprising a surface functionalized 2D WSe 2p-FET, with a solution-processed WSe 2 Resistive Random Access Memory. The employed plasma oxidation technique results in a low Schottky barrier height of 25 meV with a mobility of 230 cm 2 V−1 s−1, leading to a 100x performance enhanced WSe 2p-FET, while the defective WSe 2 Resistive Random Access Memory exhibits a switching energy of 2.6 pJ per bit. Furthermore, guided by our device-circuit modelling, we propose vertically stacked channel FETs for high-density sub-0.01 μm 2 memory cells, offering a new beyond-Si solution to enable 3-D embedded memories for future computing systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
In-memory computing with resistive switching devices
Ielmini, D., & Wong, H.-S. P. (2018) · Nature Electronics · doi:10.1038/s41928-018-0092-2 · Cited by 2,298
Crossbar RRAM Arrays: Selector Device Requirements During Read Operation
Zhou, J., Kim, K.-H., & Lu, W. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2310200 · Cited by 310
Crossbar RRAM Arrays: Selector Device Requirements During Write Operation
Kim, S., Zhou, J., & Lu, W. D. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2327514 · Cited by 219
Cited by
Transistors based on two-dimensional materials for future integrated circuits
Das, S., Sebastian, A., Pop, E., McClellan, C. J., Franklin, A. D., Grasser, T., Knobloch, T., Illarionov, Y., Penumatcha, A. V., Appenzeller, J., et al. (2021) · Nature Electronics · doi:10.1038/s41928-021-00670-1 · Cited by 983
Logic-in-memory based on an atomically thin semiconductor
Migliato Marega, G., Zhao, Y., Avsar, A., Wang, Z., Tripathi, M., Radenovic, A., & Kis, A. (2020) · Nature · doi:10.1038/s41586-020-2861-0 · Cited by 447
Self-citationTwo-dimensional devices and integration towards the silicon lines
Wang, S., Liu, X., Xu, M., Liu, L., Yang, D., & Zhou, P. (2022) · Nature Materials · doi:10.1038/s41563-022-01383-2 · Cited by 332
The development of integrated circuits based on two-dimensional materials
Zhu, K., Wen, C., Aljarb, A. A., Xue, F., Xu, X., Tung, V., Zhang, X., Alshareef, H. N., & Lanza, M. (2021) · Nature Electronics · doi:10.1038/s41928-021-00672-z · Cited by 327
Hardware Implementation of Neuromorphic Computing Using Large‐Scale Memristor Crossbar Arrays
Li, Y., & Ang, K.-W. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202000137 · Cited by 220
Self-citation
Metadata
- Authors
- Sivan, M., Li, Y., Veluri, H., Zhao, Y., Tang, B., Wang, X., Zamburg, E., Leong, J. F., Niu, J. X., Chand, U., & Thean, A. V.-Y.
- Venue
- Nature Communications
- Published
- 2019-11-15
- Volume
- 10
- Issue
- 1
- Pages
- 5201-5201
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2984707426
- Cited by
- 209
- References
- 3
- FWCI
- 6.08
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: All WSe2 1T1R resistive RAM cell for future monolithic 3D embedded memory integration. https://app.cochat.ai/papers/10.1038/s41467-019-13176-4
- The paper
- Sivan, M., Li, Y., Veluri, H., Zhao, Y., Tang, B., Wang, X., Zamburg, E., Leong, J. F., Niu, J. X., Chand, U., & Thean, A. V.-Y. (2019). All WSe2 1T1R resistive RAM cell for future monolithic 3D embedded memory integration. Nature Communications. https://doi.org/10.1038/s41467-019-13176-4
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.