CoChat

Ruthenium anchored on carbon nanotube electrocatalyst for hydrogen production with enhanced Faradaic efficiency

Open access

The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.

Abstract

Developing efficient and stable electrocatalysts is crucial for the electrochemical production of pure and clean hydrogen. For practical applications, an economical and facile method of producing catalysts for the hydrogen evolution reaction (HER) is essential. Here, we report ruthenium (Ru) nanoparticles uniformly deposited on multi-walled carbon nanotubes (MWCNTs) as an efficient HER catalyst. The catalyst exhibits the small overpotentials of 13 and 17 mV at a current density of 10 mA cm –2 in 0.5 M aq. H 2 SO 4 and 1.0 M aq. KOH, respectively, surpassing the commercial Pt/C (16 mV and 33 mV). Moreover, the catalyst has excellent stability in both media, showing almost “zeroloss” during cycling. In a real device, the catalyst produces 15.4% more hydrogen per power consumed, and shows a higher Faradaic efficiency (92.28%) than the benchmark Pt/C (85.97%). Density functional theory calculations suggest that Ru–C bonding is the most plausible active site for the HER.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-020-15069-3

Cites

57 of 57 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Schematic illustration of the process steps for forming Ru@MWCNT catalyst.
Fig. 1 Schematic illustration of the process steps for forming Ru@MWCNT catalyst.CC BY · PubMed Central
Fig. 2 Structural and morphological characterization of the Ru@MWCNT. a Powder XRD pattern. Asterisks in Ru@MWCNT denote Ru crystal (JCPDS 06-663). b TGA curve under air atmosphere at a ramping rate of 10 °C min−1. c Nitrogen (N2) adsorption–desorption isotherms at 77 K. The inset in c shows the pore size distribution. The specific surface area was calculated using the BET method. d, e TEM images. The inset in (d) shows the size distribution of Ru nanoparticles. f The HR-TEM image is focused on an Ru nanoparticle, showing the high crystallinity of the Ru elements, and their compact packing in the lattice. The inset in f is the corresponding FFT pattern. g High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) image and scanning transmission electron microscopy coupled energy-dispersive X-ray spectroscopy (STEM-EDS) element mapping of Ru@MWCNT. Scale bar: d 50 nm; e 10 nm; f 2 nm; g 100 nm.
Fig. 2 Structural and morphological characterization of the Ru@MWCNT. a Powder XRD pattern. Asterisks in Ru@MWCNT denote Ru crystal (JCPDS 06-663). b TGA curve under air atmosphere at a ramping rate of 10 °C min−1. c Nitrogen (N2) adsorption–desorption isotherms at 77 K. The inset in c shows the pore size distribution. The specific surface area was calculated using the BET method. d, e TEM images. The inset in (d) shows the size distribution of Ru nanoparticles. f The HR-TEM image is focused on an Ru nanoparticle, showing the high crystallinity of the Ru elements, and their compact packing in the lattice. The inset in f is the corresponding FFT pattern. g High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) image and scanning transmission electron microscopy coupled energy-dispersive X-ray spectroscopy (STEM-EDS) element mapping of Ru@MWCNT. Scale bar: d 50 nm; e 10 nm; f 2 nm; g 100 nm.CC BY · PubMed Central
Fig. 3 Electrochemical HER performance of the Ru@MWCNT and Pt/C catalysts. a, b Polarization curves and corresponding Tafel plots in N2-saturated 0.5 M aq. H2SO4 solution and 1.0 M aq. KOH solution. Scan rate: 5 mV s−1. c Overpotentials at 10 mA cm−2 and exchange current density in N2-saturated 0.5 M aq. H2SO4 solution and 1.0 M aq. KOH solution. d Comparison of the overpotentials at 10 mA cm−2 with recently reported HER catalysts in both acidic and alkaline conditions.
Fig. 3 Electrochemical HER performance of the Ru@MWCNT and Pt/C catalysts. a, b Polarization curves and corresponding Tafel plots in N2-saturated 0.5 M aq. H2SO4 solution and 1.0 M aq. KOH solution. Scan rate: 5 mV s−1. c Overpotentials at 10 mA cm−2 and exchange current density in N2-saturated 0.5 M aq. H2SO4 solution and 1.0 M aq. KOH solution. d Comparison of the overpotentials at 10 mA cm−2 with recently reported HER catalysts in both acidic and alkaline conditions.CC BY · PubMed Central
Fig. 4 Comparison of electrochemical HER parameters. a, b The polarization curves were recorded before and after 10,000 CV potential cycles. c Comparison of overpotential changes at 10 mA cm−2 after 10,000 CV potential cycles in acidic and alkaline conditions. d Specific activities at different overpotentials (10, 20, and 30 mV) in N2-saturated acidic and alkaline conditions, respectively. e Comparison of TOF values of the Ru@MWCNT and Pt/C with other recently reported HER catalysts in acidic and alkaline conditions, respectively. f Mass activities in N2-saturated 0.5 M aq. H2SO4 and 1.0 M aq. KOH solutions, respectively.
Fig. 4 Comparison of electrochemical HER parameters. a, b The polarization curves were recorded before and after 10,000 CV potential cycles. c Comparison of overpotential changes at 10 mA cm−2 after 10,000 CV potential cycles in acidic and alkaline conditions. d Specific activities at different overpotentials (10, 20, and 30 mV) in N2-saturated acidic and alkaline conditions, respectively. e Comparison of TOF values of the Ru@MWCNT and Pt/C with other recently reported HER catalysts in acidic and alkaline conditions, respectively. f Mass activities in N2-saturated 0.5 M aq. H2SO4 and 1.0 M aq. KOH solutions, respectively.CC BY · PubMed Central
Fig. 5 HER performance evaluation in actual water splitting. a Schematic diagram of the two-electrode system measurement. b Polarization curves in N2-saturated 1.0 M aq. KOH solution. Scan rate: 5 mV s–1. c–e The voltage changes at constant current and the corresponding hydrogen production per voltage at specific currents of 10, 15, and 20 mA. f Hydrogen production per power consumption at specific current (10, 15, and 20 mA). The error bar reflects the three device results. g Faradaic efficiency at a specific voltage (1.5, 1.6, 1.7, and 1.8 V). The error bar reflects the three device results.
Fig. 5 HER performance evaluation in actual water splitting. a Schematic diagram of the two-electrode system measurement. b Polarization curves in N2-saturated 1.0 M aq. KOH solution. Scan rate: 5 mV s–1. c–e The voltage changes at constant current and the corresponding hydrogen production per voltage at specific currents of 10, 15, and 20 mA. f Hydrogen production per power consumption at specific current (10, 15, and 20 mA). The error bar reflects the three device results. g Faradaic efficiency at a specific voltage (1.5, 1.6, 1.7, and 1.8 V). The error bar reflects the three device results.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 57 references

Research works printed but not linked: 1

  1. Conway, B. E. & Bockris, J. O. M. Heats of activation in electrode processes-the electrochemical desorption mechanism of the discharge of hydroxonium ions. Can. J. Chem. 35, 1124–1136 (1957).

Cited by

See all 552

Metadata

Authors
Kweon, D. H., Okyay, M. S., Kim, S.-J., Jeon, J.-P., Noh, H.-J., Park, N., Mahmood, J., & Baek, J.-B.
Affiliations
Ulsan National Institute of Science and Technology (KR)
Corresponding author
  • Mahmood, Javeed
  • Baek, Jong-Beom
Venue
Nature Communications
Published
2020-03-09
Volume
11
Issue
1
Pages
1278-1278
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3010300906
Cited by
546
References
57
Citations by year
2026: 43 · 2025: 95 · 2024: 86 · 2023: 105 · 2022: 119 · 2021: 81 · 2020: 17
FWCI
15.92
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
  • Nanoscience and technology
Funders
National Research Foundation of Korea (2019R1C1C1006650, 2014R1A2069102, 10Z20130011057, 2016R1A5A1009405)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
Keywords
ruthenium nanoparticles, multi-walled carbon nanotubes, hydrogen evolution reaction, electrocatalysts, hydrogen production, Faradaic efficiency, catalyst stability, active site, platinum-free catalysts, acidic and alkaline electrolytes

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Ruthenium anchored on carbon nanotube electrocatalyst for hydrogen production with enhanced Faradaic efficiency. https://app.cochat.ai/papers/10.1038/s41467-020-15069-3
The paper
Kweon, D. H., Okyay, M. S., Kim, S.-J., Jeon, J.-P., Noh, H.-J., Park, N., Mahmood, J., & Baek, J.-B. (2020). Ruthenium anchored on carbon nanotube electrocatalyst for hydrogen production with enhanced Faradaic efficiency. Nature Communications. https://doi.org/10.1038/s41467-020-15069-3

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.