Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.

Cavity piezo-mechanics for superconducting-nanophotonic quantum interface

Open access
Han, Xu, Fu, Wei, Zhong, Changchun, Zou, Chang-Ling, Xu, Yuntao, Sayem, Ayed Al, Xu, Mingrui, Wang, Sihao, Cheng, Risheng, Jiang, Liang, Tang, Hong X. · 2020 · Nature Communications

Abstract

Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10 GHz phonons are resonantly coupled with photons in a superconducting cavity and a nanophotonic cavity at the same time. Taking advantage of the large piezo-mechanical cooperativity (Cem ~7) and the enhanced optomechanical coupling boosted by a pulsed optical pump, we demonstrate coherent interactions at cryogenic temperatures via the observation of efficient microwave-optical photon conversion. This hybrid interface makes a substantial step towards quantum communication at large scale, as well as novel explorations in microwave-optical photon entanglement and quantum sensing mediated by gigahertz phonons.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-020-17053-3

Cites

53 of 53 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Superconducting cavity piezo-optomechanical system. a A schematic of a 10-GHz mechanical resonator simultaneously coupled with an optical cavity and a superconducting cavity to achieve resonantly enhanced optomechanical and electromechanical interactions at the same time. The superconducting cavity is inductively coupled to a transmission line for microwave signal input and output. b Interaction diagram of the triple-resonance system. gem and gom denote the electromechanical and the cavity-enhanced optomechanical coupling rates, respectively. c Photon conversion mechanism in the frequency domain. The blue, green, and red Lorentzian shapes stand for the microwave, mechanical, and optical resonances, respectively. A red-detuned optical pump is indicated as the purple arrow. d Experimental realization of the triply resonant superconducting piezo-optomechancial interface (schematic not to scale). A frequency-tunable superconducting “Ouroboros” microwave resonator (yellow) is aligned and coupled with a piezo-optomechanical micro-disk through the piezoelectric effect. Microwave and optical photons are interconverted via cavity-enhanced interactions with 10-GHz phonons supported by the thickness mode of the micro-disk.
Fig. 1 Superconducting cavity piezo-optomechanical system. a A schematic of a 10-GHz mechanical resonator simultaneously coupled with an optical cavity and a superconducting cavity to achieve resonantly enhanced optomechanical and electromechanical interactions at the same time. The superconducting cavity is inductively coupled to a transmission line for microwave signal input and output. b Interaction diagram of the triple-resonance system. gem and gom denote the electromechanical and the cavity-enhanced optomechanical coupling rates, respectively. c Photon conversion mechanism in the frequency domain. The blue, green, and red Lorentzian shapes stand for the microwave, mechanical, and optical resonances, respectively. A red-detuned optical pump is indicated as the purple arrow. d Experimental realization of the triply resonant superconducting piezo-optomechancial interface (schematic not to scale). A frequency-tunable superconducting “Ouroboros” microwave resonator (yellow) is aligned and coupled with a piezo-optomechanical micro-disk through the piezoelectric effect. Microwave and optical photons are interconverted via cavity-enhanced interactions with 10-GHz phonons supported by the thickness mode of the micro-disk.CC BY · PubMed Central
Fig. 2 Device design and characterization. a An SEM image of the AlN piezo-optomechanical micro-disk resonator with a radius of 12 μm. An angled zoomed-in view of the suspended disk is shown on the right. b An optical image of the frequency-tunable superconducting “Ouroboros” microwave resonator fabricated in NbN on sapphire substrate. c An optical image of the integrated device showing the alignment between the “Ouroboros” and the micro-disk. The “Ouroboros” is flipped over with its circular capacitor pad aligned above the micro-disk (indicated in a red dashed circle). Scale bars in a–c are 20, 100, and 50 μm, respectively. d–f Spectrum of the optical, the mechanical, and the microwave resonances, respectively, with both amplitude and phase response at 900 mK. Orange lines are Lorentzian fittings. The detuning in d is from a pump laser at 194.363 THz (1543.5 nm). The inset in f shows the resonant frequency tuning of the “Ouroboros” under an external magnetic field. The resonance in f is at zero field.
Fig. 2 Device design and characterization. a An SEM image of the AlN piezo-optomechanical micro-disk resonator with a radius of 12 μm. An angled zoomed-in view of the suspended disk is shown on the right. b An optical image of the frequency-tunable superconducting “Ouroboros” microwave resonator fabricated in NbN on sapphire substrate. c An optical image of the integrated device showing the alignment between the “Ouroboros” and the micro-disk. The “Ouroboros” is flipped over with its circular capacitor pad aligned above the micro-disk (indicated in a red dashed circle). Scale bars in a–c are 20, 100, and 50 μm, respectively. d–f Spectrum of the optical, the mechanical, and the microwave resonances, respectively, with both amplitude and phase response at 900 mK. Orange lines are Lorentzian fittings. The detuning in d is from a pump laser at 194.363 THz (1543.5 nm). The inset in f shows the resonant frequency tuning of the “Ouroboros” under an external magnetic field. The resonance in f is at zero field.CC BY · PubMed Central
Fig. 3 Pulsed microwave-optical photon conversion. a A schematic of measurement scheme with pulsed optical pump. A 3-μs-wide red-detuned pump pulse is generated by on/off switching using an acoustic-optic modulator (AOM). To characterize the device temporal response, a low-frequency microwave signal (δ0 = 40 MHz) from a lock-in amplifier (not shown here) is upconverted to f ~ 10 GHz around the mechanical resonance by single-sideband (SSB) modulation. The signal is then sent to the device either as the microwave input (switch pos. 1), or the optical input after the optical SSB generation (pos. 2). The microwave or optical output (pos. 3 and 4, respectively) is then downconverted to 40 MHz and sent to the lock-in amplifier to measure the quadratures in time domain. PD: photodetector, LNA: low-noise RF amplifier. b Theoretical calculation of the temporal response of the system under a pulsed pump (profile indicated in gray dashed line in the top panel). ncav: intra-cavity photon number. Soe and Seo: microwave-to-optical and optical-to-microwave conversion signal, respectively. c Experimental data of the pulsed conversion signals at different input detunings from the mechanical resonance (ωm/2π=10.220GHz). The measurement time resolution is Δt ≈ 1.17 μs. d, e Coherent bidirectional microwave-optical photon conversion spectra with both amplitude and phase responses.
Fig. 3 Pulsed microwave-optical photon conversion. a A schematic of measurement scheme with pulsed optical pump. A 3-μs-wide red-detuned pump pulse is generated by on/off switching using an acoustic-optic modulator (AOM). To characterize the device temporal response, a low-frequency microwave signal (δ0 = 40 MHz) from a lock-in amplifier (not shown here) is upconverted to f ~ 10 GHz around the mechanical resonance by single-sideband (SSB) modulation. The signal is then sent to the device either as the microwave input (switch pos. 1), or the optical input after the optical SSB generation (pos. 2). The microwave or optical output (pos. 3 and 4, respectively) is then downconverted to 40 MHz and sent to the lock-in amplifier to measure the quadratures in time domain. PD: photodetector, LNA: low-noise RF amplifier. b Theoretical calculation of the temporal response of the system under a pulsed pump (profile indicated in gray dashed line in the top panel). ncav: intra-cavity photon number. Soe and Seo: microwave-to-optical and optical-to-microwave conversion signal, respectively. c Experimental data of the pulsed conversion signals at different input detunings from the mechanical resonance (ωm/2π=10.220GHz). The measurement time resolution is Δt ≈ 1.17 μs. d, e Coherent bidirectional microwave-optical photon conversion spectra with both amplitude and phase responses.CC BY · PubMed Central
Fig. 4 Conversion efficiency and thermal shift. a Calibrated on-chip microwave-optical photon conversion efficiency η0 at different optical pump power Pin. b Estimated temperature T and electromechanical resonance mismatch δem of the “Ouroboros” at different pump powers. Gray dashed lines label the values at Pin = 16 dBm when the highest conversion efficiency is measured. c, d The optical resonance and the conversion spectrum at different time during a 16-dBm pump pulse, respectively. The spectra are vertically displaced for comparison purpose. The time resolution is Δt ≈ 1.17 μs.
Fig. 4 Conversion efficiency and thermal shift. a Calibrated on-chip microwave-optical photon conversion efficiency η0 at different optical pump power Pin. b Estimated temperature T and electromechanical resonance mismatch δem of the “Ouroboros” at different pump powers. Gray dashed lines label the values at Pin = 16 dBm when the highest conversion efficiency is measured. c, d The optical resonance and the conversion spectrum at different time during a 16-dBm pump pulse, respectively. The spectra are vertically displaced for comparison purpose. The time resolution is Δt ≈ 1.17 μs.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 53 references

Research works printed but not linked: 1

  1. Wang, Z. et al. Quantum microwave radiometry with a superconducting qubit. arXiv preprint arXiv:1909.12295v2 (2019b). · arXiv

Cited by

See all 137

Metadata

Authors
Han, X., Fu, W., Zhong, C., Zou, C.-L., Xu, Y., Sayem, A. A., Xu, M., Wang, S., Cheng, R., Jiang, L., & Tang, H. X.
Affiliations
  • Argonne National Laboratory (US)
  • Yale University (US)
Corresponding author
Tang, Hong X.
Venue
Nature Communications
Published
2020-06-26
Volume
11
Issue
1
Pages
3237-3237
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3037741690
Cited by
123
References
53
Citations by year
2026: 12 · 2025: 15 · 2024: 16 · 2023: 18 · 2022: 22 · 2021: 31 · 2020: 9
FWCI
8.44
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • arXiv (Cornell University) (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Figshare (submittedVersion, cc-by)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
  • arXiv (Cornell University)
Funders
  • United States Department of Defense | United States Army | U.S. Army Research, Development and Engineering Command | Army Research Office (W911NF-18-1-0020)
  • United States Department of Defense | United States Air Force | AFMC | Air Force Office of Scientific Research (FA9550-14-1-0052, FA9550-15-1-0015)
  • U.S. Department of Energy (DE-SC0019406)
  • National Science Foundation (EFMA-1640959)
Topics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Mechanical and Optical Resonators
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Quantum Information and Cryptography
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Acoustic Wave Resonator Technologies
Keywords
superconducting cavities, nanophotonic cavities, hybrid quantum systems, optomechanical coupling, phonon-photon coupling, quantum interface, quantum networks, quantum communication, quantum sensing

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Cavity piezo-mechanics for superconducting-nanophotonic quantum interface. https://app.cochat.ai/papers/10.1038/s41467-020-17053-3
The paper
Han, X., Fu, W., Zhong, C., Zou, C.-L., Xu, Y., Sayem, A. A., Xu, M., Wang, S., Cheng, R., Jiang, L., & Tang, H. X. (2020). Cavity piezo-mechanics for superconducting-nanophotonic quantum interface. Nature Communications. https://doi.org/10.1038/s41467-020-17053-3

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.