CoChat

The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.

Two-dimensional optomechanical crystal cavity with high quantum cooperativity

Open access

Abstract

Optomechanical systems offer new opportunities in quantum information processing and quantum sensing. Many solid-state quantum devices operate at millikelvin temperatures—however, it has proven challenging to operate nanoscale optomechanical devices at these ultralow temperatures due to their limited thermal conductance and parasitic optical absorption. Here, we present a two-dimensional optomechanical crystal resonator capable of achieving large cooperativity C and small effective bath occupancy nb, resulting in a quantum cooperativity Ceff ≡ C/nb > 1 under continuous-wave optical driving. This is realized using a two-dimensional phononic bandgap structure to host the optomechanical cavity, simultaneously isolating the acoustic mode of interest in the bandgap while allowing heat to be removed by phonon modes outside of the bandgap. This achievement paves the way for a variety of applications requiring quantum-coherent optomechanical interactions, such as transducers capable of bi-directional conversion of quantum states between microwave frequency superconducting quantum circuits and optical photons in a fiber optic network.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-020-17182-9

Cites

72 of 72 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Quasi-2D OMC cavity design. a Unit cell schematic of a linear waveguide formed in the snowflake crystal. Guided modes of the waveguide propagate along the x-axis. Insets: (left) “C”-shaped parameters; (right) snowflake parameters. b Photonic and c phononic bandstructure of the linear waveguide. The solid blue curves are waveguide bands of interest; dashed lines are other guided modes; shaded light blue regions are bandgaps of interest; green tick mark indicates the cavity mode frequencies; gray regions denote the continua of propagating modes. In the photonic bandstructure, only modes of even vector parity about the center of the Si slab (σz = +1) are shown. In the acoustic bandstructure, green dashed curves are for σz = +1 and σy = −1 parity modes, and yellow dashed curves denote σz = −1 modes. d FEM-simulated mode profile (Ey component of the electric field) of the fundamental optical cavity resonance at ωc/2π = 194 THz, with red (blue) corresponding to positive (negative) field amplitude. e Simulated displacement profile of the fundamental acoustic cavity resonance at ωc/2π = 10.27 GHz. The magnitude of displacement is represented by color (large displacement in red, zero displacement in blue).
Fig. 1 Quasi-2D OMC cavity design. a Unit cell schematic of a linear waveguide formed in the snowflake crystal. Guided modes of the waveguide propagate along the x-axis. Insets: (left) “C”-shaped parameters; (right) snowflake parameters. b Photonic and c phononic bandstructure of the linear waveguide. The solid blue curves are waveguide bands of interest; dashed lines are other guided modes; shaded light blue regions are bandgaps of interest; green tick mark indicates the cavity mode frequencies; gray regions denote the continua of propagating modes. In the photonic bandstructure, only modes of even vector parity about the center of the Si slab (σz = +1) are shown. In the acoustic bandstructure, green dashed curves are for σz = +1 and σy = −1 parity modes, and yellow dashed curves denote σz = −1 modes. d FEM-simulated mode profile (Ey component of the electric field) of the fundamental optical cavity resonance at ωc/2π = 194 THz, with red (blue) corresponding to positive (negative) field amplitude. e Simulated displacement profile of the fundamental acoustic cavity resonance at ωc/2π = 10.27 GHz. The magnitude of displacement is represented by color (large displacement in red, zero displacement in blue).CC BY · PubMed Central
Fig. 2 Device fabrication and measurement set-up. a SEM image of a full quasi-2D snowflake OMC device fabricated on SOI. This device is an “8-shield device” in which an additional eight periods of cross-structure phononic bandgap shielding is applied at the periphery (see Supplementary Note 4). A lensed optical fiber is used to couple light into a tapered on-chip waveguide, which is butt-coupling to the quasi-2D snowflake OMC cavity. b SEM image of the center of the cavity region. Fitting to the geometries for “C”-shaped holes and snowflake holes in the cavity region are shown as red solid lines. c Measured “C” parameters fit from SEM images of a fabricated cavity (dots) along with their design values (dashed curves). Shown over one half of the cavity (first 8 “C” shapes on the right side of the cavity) are the parameters (from top to bottom): ho (cyan circles), wo/2 (green squares), hi (blue crosses), and wi/2 (red triangles). Error bars in geometrical parameters correspond to standard deviation of ten sets of measured SEM images. d Experimental set-up for characterization of the quasi-2D snowflake OMC cavity. Multiple optical switches are used to switch between continuous wave and pulsed optical excitation and between heterodyne spectroscopy and single photon detection. AOM acousto-optic modulator, EOM electro-optic modulator, EDFA erbium-doped fiber amplifier, VC variable coupler, BDP balanced photodetector, SPD single photon detector. A more detailed schematic and description of the measurement set-up is provided in Supplementary Note 2.
Fig. 2 Device fabrication and measurement set-up. a SEM image of a full quasi-2D snowflake OMC device fabricated on SOI. This device is an “8-shield device” in which an additional eight periods of cross-structure phononic bandgap shielding is applied at the periphery (see Supplementary Note 4). A lensed optical fiber is used to couple light into a tapered on-chip waveguide, which is butt-coupling to the quasi-2D snowflake OMC cavity. b SEM image of the center of the cavity region. Fitting to the geometries for “C”-shaped holes and snowflake holes in the cavity region are shown as red solid lines. c Measured “C” parameters fit from SEM images of a fabricated cavity (dots) along with their design values (dashed curves). Shown over one half of the cavity (first 8 “C” shapes on the right side of the cavity) are the parameters (from top to bottom): ho (cyan circles), wo/2 (green squares), hi (blue crosses), and wi/2 (red triangles). Error bars in geometrical parameters correspond to standard deviation of ten sets of measured SEM images. d Experimental set-up for characterization of the quasi-2D snowflake OMC cavity. Multiple optical switches are used to switch between continuous wave and pulsed optical excitation and between heterodyne spectroscopy and single photon detection. AOM acousto-optic modulator, EOM electro-optic modulator, EDFA erbium-doped fiber amplifier, VC variable coupler, BDP balanced photodetector, SPD single photon detector. A more detailed schematic and description of the measurement set-up is provided in Supplementary Note 2.CC BY · PubMed Central
Fig. 3 Optomechanical characterization. a Optical spectrum of a quasi-2D snowflake OMC cavity measured using a swept laser scan. b Pump–probe measurement of the mechanical mode spectrum of interest centered around ωm/2π = 10.21 GHz for different optical pump powers (from lowest to highest peak reflection: nc = 33, nc = 104, and nc = 330). Inset: measured mechanical mode linewidth versus nc. The device measured in a, b is a cavity with zero additional acoustic shield periods (zero-shield device). c Pulsed ringdown measurement of a quasi-2D snowflake OMC cavity with 8 periods of additional cross-structure shielding (8-shield device). The measured optomechanical parameters of this device are (κ, κe, g0, ωm, γ0) = 2π(1.19 GHz, 180 MHz, 1.18 MHz, 10.02 GHz, 8.28−0.43^(+1.25) Hz). The phonon occupancy at the beginning of each 10-μs optical pulse, ni (orange squares), is measured using a peak power corresponding to nc = 60. Inset: mode heating within the optical pulse, with blue circles corresponding to data and the solid line a fit to the heating curve. nf is the mode occupancy at the end of the optical pulse, used here to check for consistent excitation across the different inter-pulse τoff measurements.
Fig. 3 Optomechanical characterization. a Optical spectrum of a quasi-2D snowflake OMC cavity measured using a swept laser scan. b Pump–probe measurement of the mechanical mode spectrum of interest centered around ωm/2π = 10.21 GHz for different optical pump powers (from lowest to highest peak reflection: nc = 33, nc = 104, and nc = 330). Inset: measured mechanical mode linewidth versus nc. The device measured in a, b is a cavity with zero additional acoustic shield periods (zero-shield device). c Pulsed ringdown measurement of a quasi-2D snowflake OMC cavity with 8 periods of additional cross-structure shielding (8-shield device). The measured optomechanical parameters of this device are (κ, κe, g0, ωm, γ0) = 2π(1.19 GHz, 180 MHz, 1.18 MHz, 10.02 GHz, 8.28−0.43^(+1.25) Hz). The phonon occupancy at the beginning of each 10-μs optical pulse, ni (orange squares), is measured using a peak power corresponding to nc = 60. Inset: mode heating within the optical pulse, with blue circles corresponding to data and the solid line a fit to the heating curve. nf is the mode occupancy at the end of the optical pulse, used here to check for consistent excitation across the different inter-pulse τoff measurements.CC BY · PubMed Central
Fig. 4 Optical-absorption-induced hot bath. a Diagram illustrating the proposed model of heating of the mechanics due to optical absorption and the various baths coupled to the localized mechanical mode. b Plot of measured np versus nc. The solid line is a fit to the data giving np=(1.1)×nc^0.3. Dashed line indicates np versus nc for a 1D nanobeam device measured in ref. 32 for comparison. c Plot of measured linewidth γ (blue dots) versus nc. The blue solid line is a power-law fit to the data, where in the low nc regime γ/2π≈γϕ/2π+γp/2π=14.54kHz+(1.1kHz)×nc^0.61 and in the high nc regime γ/2π=23.91kHz+(9.01kHz)×nc^0.29. The red solid curve is the resulting fit for γp by itself. For comparison, the dashed red curve is a plot of γp versus nc for a 1D nanobeam device from ref. 32. Error bars correspond to 90% confidence interval in fit to Lorentzian spectral linewidth (error bars smaller than the symbol are not shown). In b, c the quasi-2D OMC cavity measurements are for the same 8-shield device as in Fig. 3c.
Fig. 4 Optical-absorption-induced hot bath. a Diagram illustrating the proposed model of heating of the mechanics due to optical absorption and the various baths coupled to the localized mechanical mode. b Plot of measured np versus nc. The solid line is a fit to the data giving np=(1.1)×nc^0.3. Dashed line indicates np versus nc for a 1D nanobeam device measured in ref. 32 for comparison. c Plot of measured linewidth γ (blue dots) versus nc. The blue solid line is a power-law fit to the data, where in the low nc regime γ/2π≈γϕ/2π+γp/2π=14.54kHz+(1.1kHz)×nc^0.61 and in the high nc regime γ/2π=23.91kHz+(9.01kHz)×nc^0.29. The red solid curve is the resulting fit for γp by itself. For comparison, the dashed red curve is a plot of γp versus nc for a 1D nanobeam device from ref. 32. Error bars correspond to 90% confidence interval in fit to Lorentzian spectral linewidth (error bars smaller than the symbol are not shown). In b, c the quasi-2D OMC cavity measurements are for the same 8-shield device as in Fig. 3c.CC BY · PubMed Central
Fig. 5 Phonon occupancy and effective quantum cooperativity. a Plot of the measured occupancy 〈n〉 in the acoustic mode at ωm/2π = 10.02 GHz versus laser pump power in units of intra-cavity photons, nc, and optical power coupled into coupling waveguide, Pin. Filled blue circles are measured data. b Plot of quantum cooperativity Ceff versus nc and Pin. The Ceff data points (filled blue squares) are inferred using Eq. (1) from the measured 〈n〉 in a along with the fit to the measured np and γp from Fig. 4. In both a and b, the solid curves are theoretical plots calculated using the power-law fits of γp and np considering optical heating from nc alone (β = 0, red solid line curve) and including direct heating from Pin with β = 15 μW−1 (blue solid curve). c Estimated back-action cooled phonon occupancy 〈n〉 for a quasi-2D OMC device with the same properties as measured in a save for a modified Q-factor and no waveguide heating (β = 0). White solid curves delineate contours of constant quantum cooperativity Ceff. In a, b, quasi-2D OMC cavity measurements are for the same device as in Figs. 3c and 4.
Fig. 5 Phonon occupancy and effective quantum cooperativity. a Plot of the measured occupancy 〈n〉 in the acoustic mode at ωm/2π = 10.02 GHz versus laser pump power in units of intra-cavity photons, nc, and optical power coupled into coupling waveguide, Pin. Filled blue circles are measured data. b Plot of quantum cooperativity Ceff versus nc and Pin. The Ceff data points (filled blue squares) are inferred using Eq. (1) from the measured 〈n〉 in a along with the fit to the measured np and γp from Fig. 4. In both a and b, the solid curves are theoretical plots calculated using the power-law fits of γp and np considering optical heating from nc alone (β = 0, red solid line curve) and including direct heating from Pin with β = 15 μW−1 (blue solid curve). c Estimated back-action cooled phonon occupancy 〈n〉 for a quasi-2D OMC device with the same properties as measured in a save for a modified Q-factor and no waveguide heating (β = 0). White solid curves delineate contours of constant quantum cooperativity Ceff. In a, b, quasi-2D OMC cavity measurements are for the same device as in Figs. 3c and 4.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 71 references

Research works printed but not linked: 2

  1. Meenehan, S. M. et al. Pulsed excitation dynamics of an optomechanical crystal resonator near its quantum ground state of motion. Phys. Rev. X 5, 041002 (2015).
  2. Akhiezer, A. On the sound absorption in solids. J. Phys. (USSR) 1, 277 (1939).

Cited by

See all 131

Metadata

Authors
Ren, H., Matheny, M. H., MacCabe, G. S., Luo, J., Pfeifer, H., Mirhosseini, M., & Painter, O.
Affiliations
  • California Institute of Technology (US)
  • University of Bonn (DE)
Corresponding author
Painter, Oskar
Venue
Nature Communications
Published
2020-07-06
Volume
11
Issue
1
Pages
3373-3373
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2978788554
Cited by
131
References
71
Citations by year
2026: 7 · 2025: 17 · 2024: 25 · 2023: 17 · 2022: 20 · 2021: 36 · 2020: 9
FWCI
8.44
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • arXiv (Cornell University) (submittedVersion)
  • CaltechAUTHORS (California Institute of Technology) (submittedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Figshare (submittedVersion, cc-by)
  • arXiv (Cornell University)
Funders
  • United States Department of Defense | United States Air Force | AFMC | Air Force Office of Scientific Research (N00014-15- 1-2761)
  • National Science Foundation (PHY-1733907)
  • A*STAR | Singapore Institute of Manufacturing Technology
Topics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Mechanical and Optical Resonators
  • Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Acoustic Wave Phenomena Research
  • Physical Sciences › Computer Science › Artificial Intelligence › Neural Networks and Reservoir Computing
Keywords
optomechanical crystals, optomechanical resonators, thermal insulation, phonon thermal transport, optomechanical transducer, superconducting quantum circuits

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Two-dimensional optomechanical crystal cavity with high quantum cooperativity. https://app.cochat.ai/papers/10.1038/s41467-020-17182-9
The paper
Ren, H., Matheny, M. H., MacCabe, G. S., Luo, J., Pfeifer, H., Mirhosseini, M., & Painter, O. (2020). Two-dimensional optomechanical crystal cavity with high quantum cooperativity. Nature Communications. https://doi.org/10.1038/s41467-020-17182-9

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.