CoChat

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.

Simple descriptor derived from symbolic regression accelerating the discovery of new perovskite catalysts

Open access

Abstract

Symbolic regression (SR) is an approach of interpretable machine learning for building mathematical formulas that best fit certain datasets. In this work, SR is used to guide the design of new oxide perovskite catalysts with improved oxygen evolution reaction (OER) activities. A simple descriptor, μ/t, where μ and t are the octahedral and tolerance factors, respectively, is identified, which accelerates the discovery of a series of new oxide perovskite catalysts with improved OER activity. We successfully synthesise five new oxide perovskites and characterise their OER activities. Remarkably, four of them, Cs 0.4 La 0.6 Mn 0.25 Co 0.75 O 3, Cs 0.3 La 0.7 NiO 3, SrNi 0.75 Co 0.25 O 3, and Sr 0.25 Ba 0.75 NiO 3, are among the oxide perovskite catalysts with the highest intrinsic activities. Our results demonstrate the potential of SR for accelerating the data-driven design and discovery of new materials with improved properties.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-020-17263-9

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Workflow diagram. It contains four major parts: dataset generation (blue), SR (red), materials design and screening (green) and experimental verification (brown).
Fig. 1 Workflow diagram. It contains four major parts: dataset generation (blue), SR (red), materials design and screening (green) and experimental verification (brown).CC BY · PubMed Central
Fig. 2 Data collection and process. a The landscape of all VRHE data produced by experiments, including eighteen conventional and five new perovskites (totally twenty-three perovskites listed as ‘Materials index’ with sequence shown in Table 1). Each perovskite has been made four samples and each sample has been measured three times (totally twelve measurements listed as ‘No. of measurements’). For each measurement, we adopted VRHE values at five current densities of 50 µA cm−2, 5 mA cm−2, 10 mA cm−2, 15 mA cm−2, and 20 mA cm−2. The exact values of those data points are provided in Supplementary Data 1–5. b The flowchart of symbolic regression based on genetic programming (see more details of this flowchart and SR in Supplementary Information).
Fig. 2 Data collection and process. a The landscape of all VRHE data produced by experiments, including eighteen conventional and five new perovskites (totally twenty-three perovskites listed as ‘Materials index’ with sequence shown in Table 1). Each perovskite has been made four samples and each sample has been measured three times (totally twelve measurements listed as ‘No. of measurements’). For each measurement, we adopted VRHE values at five current densities of 50 µA cm−2, 5 mA cm−2, 10 mA cm−2, 15 mA cm−2, and 20 mA cm−2. The exact values of those data points are provided in Supplementary Data 1–5. b The flowchart of symbolic regression based on genetic programming (see more details of this flowchart and SR in Supplementary Information).CC BY · PubMed Central
Fig. 3 Descriptor generation and performance. a Pareto front of MAE vs. complexity of 8640 mathematical formulas shown via density plot. b VRHE vs. μ/t (black diamonds: conventional perovskites; red dots: new perovskites). The current densities are normalised by BET surface areas (Supplementary Table 2) and loading amount. c Figure 2 from the study of Suntiviich et al.9 reproduced with permission from the American Association for the Advancement of Science. d Reformatted plot according to descriptor μ/t of c. The MAE (Pearson correlation coefficient) for c, d were 20.6 meV (0.923) and 21.0 meV (0.928), respectively.(The error bar in b is produced by the maximum and minimum values in experiments data).
Fig. 3 Descriptor generation and performance. a Pareto front of MAE vs. complexity of 8640 mathematical formulas shown via density plot. b VRHE vs. μ/t (black diamonds: conventional perovskites; red dots: new perovskites). The current densities are normalised by BET surface areas (Supplementary Table 2) and loading amount. c Figure 2 from the study of Suntiviich et al.9 reproduced with permission from the American Association for the Advancement of Science. d Reformatted plot according to descriptor μ/t of c. The MAE (Pearson correlation coefficient) for c, d were 20.6 meV (0.923) and 21.0 meV (0.928), respectively.(The error bar in b is produced by the maximum and minimum values in experiments data).CC BY · PubMed Central
Fig. 4 OER characterisations of Ba0.5Sr0.5Co0.8Fe0.2O3 and predicted new oxide perovskites. a LSV curves. b Corresponding Tafel slopes. c Mass and specific activities. d Results of stability tests under galvanostatic conditions at 10 mA cm−2 disk current density.
Fig. 4 OER characterisations of Ba0.5Sr0.5Co0.8Fe0.2O3 and predicted new oxide perovskites. a LSV curves. b Corresponding Tafel slopes. c Mass and specific activities. d Results of stability tests under galvanostatic conditions at 10 mA cm−2 disk current density.CC BY · PubMed Central
Fig. 5 Morphology measurements of Ba0.75Sr0.25NiO3 before and after OER testing. a HRTEM before a stability test. b HRTEM after a stability test. Right side: STEM atomic mapping (scale bar: 500 nm). The labelled lattice spacing is around 0.3 nm, which corresponded to the (110) lattice planes of Ba0.75Sr0.25NiO3, in good agreement with the PXRD measurements. The insets of a, b show the fast Fourier transform image of the corresponding HRTEM image. The well-regulated arrayed spots indicated that the grown crystal had high crystallinity. HRTEM of Ba0.75Sr0.25NiO3 before and after OER testing clearly showed the same lattice spacing and very similar fast Fourier transform images, suggesting outstanding stability of the Ba0.75Sr0.25NiO3 sample under OER conditions. The maintenance of good crystallinity indicates that Ba0.75Sr0.25NiO3 is a stable OER electrocatalyst. In order to verify the atomic distribution, STEM mapping was conducted; the even distribution of the atoms over the analyzed area further demonstrates the excellent stability of the sample.
Fig. 5 Morphology measurements of Ba0.75Sr0.25NiO3 before and after OER testing. a HRTEM before a stability test. b HRTEM after a stability test. Right side: STEM atomic mapping (scale bar: 500 nm). The labelled lattice spacing is around 0.3 nm, which corresponded to the (110) lattice planes of Ba0.75Sr0.25NiO3, in good agreement with the PXRD measurements. The insets of a, b show the fast Fourier transform image of the corresponding HRTEM image. The well-regulated arrayed spots indicated that the grown crystal had high crystallinity. HRTEM of Ba0.75Sr0.25NiO3 before and after OER testing clearly showed the same lattice spacing and very similar fast Fourier transform images, suggesting outstanding stability of the Ba0.75Sr0.25NiO3 sample under OER conditions. The maintenance of good crystallinity indicates that Ba0.75Sr0.25NiO3 is a stable OER electrocatalyst. In order to verify the atomic distribution, STEM mapping was conducted; the even distribution of the atoms over the analyzed area further demonstrates the excellent stability of the sample.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 35 references

Research works printed but not linked: 1

  1. Lu, S. et al. Accelerated discovery of stable lead-free hybrid organic-inorganic perovskites via machine learning. Nat. Commun. 9, 3405 (2018). · DOI · Paper page

Cited by

See all 376

Metadata

Authors
Weng, B., Song, Z., Zhu, R., Yan, Q., Sun, Q., Grice, C. G., Yan, Y., & Yin, W.-J.
Affiliations
  • Central South University (CN)
  • Soochow University (CN)
  • Hunan University (CN)
  • University of Toledo (US)
Corresponding author
  • Yan, Yanfa
  • Yin, Wan-Jian
Venue
Nature Communications
Published
2020-07-14
Volume
11
Issue
1
Pages
3513-3513
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3042344738
Cited by
376
References
35
Citations by year
2026: 45 · 2025: 94 · 2024: 66 · 2023: 72 · 2022: 62 · 2021: 35 · 2020: 2
FWCI
8.45
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
National Natural Science Foundation of China (11674237, 11974257)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Machine Learning in Materials Science
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
Keywords
symbolic regression, perovskite catalysts, oxygen evolution reaction, catalyst discovery, molecular descriptors, tolerance factor, octahedral distortion, perovskite oxides, data-driven materials design

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Simple descriptor derived from symbolic regression accelerating the discovery of new perovskite catalysts. https://app.cochat.ai/papers/10.1038/s41467-020-17263-9
The paper
Weng, B., Song, Z., Zhu, R., Yan, Q., Sun, Q., Grice, C. G., Yan, Y., & Yin, W.-J. (2020). Simple descriptor derived from symbolic regression accelerating the discovery of new perovskite catalysts. Nature Communications. https://doi.org/10.1038/s41467-020-17263-9

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.