Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; the references it cites are not checked yet.

CTF-based soft touch actuator for playing electronic piano

Open access
Mahato, Manmatha, Tabassian, Rassoul, Nguyen, Van Hiep, Oh, Saewoong, Nam, Sanghee, Hwang, Won-Jun, Oh, Il-Kwon · 2020 · Nature Communications

Abstract

In the field of bioinspired soft robotics, to accomplish sophisticated tasks in human fingers, electroactive artificial muscles are under development. However, most existing actuators show a lack of high bending displacement and irregular response characteristics under low input voltages. Here, based on metal free covalent triazine frameworks (CTFs), we report an electro-ionic soft actuator that shows high bending deformation under ultralow input voltages that can be implemented as a soft robotic touch finger on fragile displays. The as-synthesized CTFs, derived from a polymer of intrinsic microporosity (PIM-1), were combined with poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT-PSS) to make a flexible electrode for a high-performance electro-ionic soft actuator. The proposed soft touch finger showed high peak-to-peak displacement of 17.0 mm under ultralow square voltage of ±0.5 V, with 0.1 Hz frequency and 4 times reduced phase delay in harmonic response compared with that of a pure PEDOT-PSS-based actuator. The significant actuation performance is mainly due to the unique physical and chemical configurations of CTFs electrode with highly porous and electrically conjugated networks. On a fragile display, the developed soft robotic touch finger array was successfully used to perform soft touching, similar to that of a real human finger; device was used to accomplish a precise task, playing electronic piano.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-020-19180-3

Cites

Statistics

Figures

Fig. 1 Schematic representation of synthesis of Triazine-PIM-1 (CTFs) electrode materials and soft robotic touch finger for playing piano. a Synthetic routes to polymer of intrinsic microporosity (PIM-1) and porous covalent triazine frameworks (CTFs) at 400, 500, and 600 °C through ionothermal methods. b Working principle of soft robotic touch finger and actuation mechanism of ionic soft actuators using CTF electrode materials.
Fig. 1 Schematic representation of synthesis of Triazine-PIM-1 (CTFs) electrode materials and soft robotic touch finger for playing piano. a Synthetic routes to polymer of intrinsic microporosity (PIM-1) and porous covalent triazine frameworks (CTFs) at 400, 500, and 600 °C through ionothermal methods. b Working principle of soft robotic touch finger and actuation mechanism of ionic soft actuators using CTF electrode materials.CC BY · PubMed Central
Fig. 2 Morphological characterization of synthesized hierarchical porous CTFs electrode material at different magnifications. a–c High-resolution SEM images of TP6 with 5, 2, and 1 µm scale bars showing well-ordered macroporous structures. d–f High-resolution TEM images of TP6 with 10, 5, and 1 nm scale bars showing meso and microporous structures. g Highest magnified HRTEM images showing both vertically and horizontally aligned crystalline regions of TP6 at atomic level at 1 nm scale. h Magnified HRTEM images of horizontally aligned crystalline regions. i Magnified HRTEM images of vertically aligned crystalline regions at atomic level at 0.5 nm scale.
Fig. 2 Morphological characterization of synthesized hierarchical porous CTFs electrode material at different magnifications. a–c High-resolution SEM images of TP6 with 5, 2, and 1 µm scale bars showing well-ordered macroporous structures. d–f High-resolution TEM images of TP6 with 10, 5, and 1 nm scale bars showing meso and microporous structures. g Highest magnified HRTEM images showing both vertically and horizontally aligned crystalline regions of TP6 at atomic level at 1 nm scale. h Magnified HRTEM images of horizontally aligned crystalline regions. i Magnified HRTEM images of vertically aligned crystalline regions at atomic level at 0.5 nm scale.CC BY · PubMed Central
Fig. 3 Physicochemical and structural characterizations of as-synthesized novel CTFs electrode materials. a Nitrogen adsorption-desorption isotherms of TP4, TP5, and TP6 at 77 K. Filled and empty symbols denote adsorption and desorption, respectively. Inset: respective specific surface area data. An increase in the surface area from TP4 to TP6 increases the surface energy for physicochemical interactions. All measurements were carried out using 200 mg of each CTF, as mentioned. b NLDFT pore size distribution of TP4, TP5, and TP6 electrode materials corresponding to nitrogen isotherm. Micropore (size < 2 nm) is not observed because BET isotherm measurement was taken using nitrogen gas and adsorption-desorption data had not been recorded at very low pressure defining micropores during N2-sorption isotherm analysis. Inset: NLDFT micropores distribution of TP6 corresponding to argon adsorption-desorption isotherm at 87 K (Supplementary Fig. 4b). Pore size < 2 nm confirms the permanent microporosity nature of CTFs. c Carbon dioxide (CO2) gas adsorption-desorption isotherms of TP4, TP5, and TP6 materials measured up to 1 bar at 273 K. Inset: respective CO2 uptake data. d FT-IR spectra of PIM-1 and corresponding novel PIM-1 based CTFs. Inset: disappearance of nitrile (–C≡N) peak of PIM-1 due to trimerization; appearance of –C=N– peaks due to formation of covalent triazine frameworks (CTFs: TP4, TP5, and TP6) and presence of –C–H moieties in both of PIM-1 and CTFs. e Raman spectra of TP4, TP5, and TP6 CTFs. Inset: variation of IG/ID with temperature corresponding to TP4 to TP6. Increase of ratio (IG/ID) confirms the increase size of condensed carbon frameworks/graphitic structures with increase in temperature from TP4 to TP6 electrode materials. f High-resolution P-XRD patterns of TP4, TP5, and TP6 show presence of semicrystalline structures. g–i XPS N1s spectra of (g) TP4, (h) TP5, (i) TP6 materials show three N configurations after deconvolution as olive: Ntriazine, blue: Ncyano, and violet: Ngraphitic. Increase in Ngraphitic peak area from TP4 to TP6 reveals frameworks containing graphitic nitrogen increase with increase in synthetic temperature.
Fig. 3 Physicochemical and structural characterizations of as-synthesized novel CTFs electrode materials. a Nitrogen adsorption-desorption isotherms of TP4, TP5, and TP6 at 77 K. Filled and empty symbols denote adsorption and desorption, respectively. Inset: respective specific surface area data. An increase in the surface area from TP4 to TP6 increases the surface energy for physicochemical interactions. All measurements were carried out using 200 mg of each CTF, as mentioned. b NLDFT pore size distribution of TP4, TP5, and TP6 electrode materials corresponding to nitrogen isotherm. Micropore (size < 2 nm) is not observed because BET isotherm measurement was taken using nitrogen gas and adsorption-desorption data had not been recorded at very low pressure defining micropores during N2-sorption isotherm analysis. Inset: NLDFT micropores distribution of TP6 corresponding to argon adsorption-desorption isotherm at 87 K (Supplementary Fig. 4b). Pore size < 2 nm confirms the permanent microporosity nature of CTFs. c Carbon dioxide (CO2) gas adsorption-desorption isotherms of TP4, TP5, and TP6 materials measured up to 1 bar at 273 K. Inset: respective CO2 uptake data. d FT-IR spectra of PIM-1 and corresponding novel PIM-1 based CTFs. Inset: disappearance of nitrile (–C≡N) peak of PIM-1 due to trimerization; appearance of –C=N– peaks due to formation of covalent triazine frameworks (CTFs: TP4, TP5, and TP6) and presence of –C–H moieties in both of PIM-1 and CTFs. e Raman spectra of TP4, TP5, and TP6 CTFs. Inset: variation of IG/ID with temperature corresponding to TP4 to TP6. Increase of ratio (IG/ID) confirms the increase size of condensed carbon frameworks/graphitic structures with increase in temperature from TP4 to TP6 electrode materials. f High-resolution P-XRD patterns of TP4, TP5, and TP6 show presence of semicrystalline structures. g–i XPS N1s spectra of (g) TP4, (h) TP5, (i) TP6 materials show three N configurations after deconvolution as olive: Ntriazine, blue: Ncyano, and violet: Ngraphitic. Increase in Ngraphitic peak area from TP4 to TP6 reveals frameworks containing graphitic nitrogen increase with increase in synthetic temperature.CC BY · PubMed Central
Fig. 4 Electrochemical performances of synthesized electrode materials and fabricated ionic soft actuators with proposed mechanism. Cyclic voltammetry (CV) analysis of as synthesized novel CTFs TP4, TP5, and TP6 in a aqueous 1.0 M H2SO4, b 1.0 M KOH electrolyte, and c non-aqueous 0.5 M EMIM-BF4/acetonitrile ionic-liquid electrolyte solutions at a scan rate of 0.01 V/s. d Typical CV response characteristics of TP6 electrode material at various scan rates (0.001-0.01 V/s). e Comparative average specific capacitances of TP4, TP5, and TP6, calculated at a scan rate of 0.01 V/s in all electrolytes (Supplementary Table 2). f Typical relative CV response patterns for PP, TP4PP, TP5PP, and TP6PP ionic soft actuators fabricated at a constant scan rate of 1.0 mV/s. g Probable mechanism for enhancement of actuation performance, explaining changes of structural configuration of PP in presence of synthesized CTFs responsible for high charge storage-discharge capacity. a–c Electronic interactions involved in increase of surface charge and electric conductivity of PP. h FT-IR spectra and changes of electrical conductivity/resistivity (inset), supporting proposed mechanism show clearly the shifting of characteristic FT-IR peaks and increase of electric conductivity of PP upon interaction with CTFs.
Fig. 4 Electrochemical performances of synthesized electrode materials and fabricated ionic soft actuators with proposed mechanism. Cyclic voltammetry (CV) analysis of as synthesized novel CTFs TP4, TP5, and TP6 in a aqueous 1.0 M H2SO4, b 1.0 M KOH electrolyte, and c non-aqueous 0.5 M EMIM-BF4/acetonitrile ionic-liquid electrolyte solutions at a scan rate of 0.01 V/s. d Typical CV response characteristics of TP6 electrode material at various scan rates (0.001-0.01 V/s). e Comparative average specific capacitances of TP4, TP5, and TP6, calculated at a scan rate of 0.01 V/s in all electrolytes (Supplementary Table 2). f Typical relative CV response patterns for PP, TP4PP, TP5PP, and TP6PP ionic soft actuators fabricated at a constant scan rate of 1.0 mV/s. g Probable mechanism for enhancement of actuation performance, explaining changes of structural configuration of PP in presence of synthesized CTFs responsible for high charge storage-discharge capacity. a–c Electronic interactions involved in increase of surface charge and electric conductivity of PP. h FT-IR spectra and changes of electrical conductivity/resistivity (inset), supporting proposed mechanism show clearly the shifting of characteristic FT-IR peaks and increase of electric conductivity of PP upon interaction with CTFs.CC BY · PubMed Central
Fig. 5 Typical actuating performances of fabricated PP, TP4PP, TP5PP, and TP6PP ionic soft actuators. a Time-dependent bending responses of actuators under ±0.5 V square wave input potential and 0.1 Hz excitation frequency. b Time-dependent bending response patterns of actuators under ±0.5 V sine wave input potential and 0.1 Hz frequency. c Bending responses of the TP6PP ionic soft actuators with sine wave input potentials varying from 0.1 to 1.0 V, at a constant frequency of 0.1 Hz. d Peak-to-peak displacements of PP, TP4PP, TP5PP, and TP6PP actuators with various frequencies from 0.1 to 10.0 Hz at ±1.0 V constant sine wave input potential. e Comparative phase delay response patterns of actuators under sinusoidal input potential of 1.0 V with varying of frequency from 0.1 to 5.01 Hz. f Time-dependent bending response patterns of ionic soft actuators under ±0.5 V DC input potential.
Fig. 5 Typical actuating performances of fabricated PP, TP4PP, TP5PP, and TP6PP ionic soft actuators. a Time-dependent bending responses of actuators under ±0.5 V square wave input potential and 0.1 Hz excitation frequency. b Time-dependent bending response patterns of actuators under ±0.5 V sine wave input potential and 0.1 Hz frequency. c Bending responses of the TP6PP ionic soft actuators with sine wave input potentials varying from 0.1 to 1.0 V, at a constant frequency of 0.1 Hz. d Peak-to-peak displacements of PP, TP4PP, TP5PP, and TP6PP actuators with various frequencies from 0.1 to 10.0 Hz at ±1.0 V constant sine wave input potential. e Comparative phase delay response patterns of actuators under sinusoidal input potential of 1.0 V with varying of frequency from 0.1 to 5.01 Hz. f Time-dependent bending response patterns of ionic soft actuators under ±0.5 V DC input potential.CC BY · PubMed Central
Fig. 6 Fabrication and operation of soft robotic fingers array to play piano. a Schematic illustration for the working principle of playing piano application on a smart device by soft touch robotic fingers array based on a lab designed hardware, controlled by human fingers. b Chronological arrangement of the air-working ionic soft actuators with respective electrical connections of the fabricated artificial robotic fingers array. c The hardware keyboard designed to switch the input stimulation between the actuators. d The soft touch fingers array mounted on the touch screen, which is running a piano App. e Operation of all soft touch fingers by applying input stimulation to play piano for “happy birthday” song.
Fig. 6 Fabrication and operation of soft robotic fingers array to play piano. a Schematic illustration for the working principle of playing piano application on a smart device by soft touch robotic fingers array based on a lab designed hardware, controlled by human fingers. b Chronological arrangement of the air-working ionic soft actuators with respective electrical connections of the fabricated artificial robotic fingers array. c The hardware keyboard designed to switch the input stimulation between the actuators. d The soft touch fingers array mounted on the touch screen, which is running a piano App. e Operation of all soft touch fingers by applying input stimulation to play piano for “happy birthday” song.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

The citation lists are queued

They are fetched later and appear here then.

References 50 · Cited by 94

Research works printed but not linked: 1

  1. Hao, L. et al. Structural evolution of 2D microporous covalent triazine-based framework toward the study of high-performance supercapacitors. J. Am. Chem. Soc. 137, 219–225 (2014). · DOI · Paper page

Metadata

Authors
Mahato, M., Tabassian, R., Nguyen, V. H., Oh, S., Nam, S., Hwang, W.-J., & Oh, I.-K.
Affiliations
Korea Advanced Institute of Science and Technology (KR)
Corresponding author
Oh, Il-Kwon
Venue
Nature Communications
Published
2020-10-23
Volume
11
Issue
1
Pages
5358-5358
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3094003854
Cited by
94
References
50
Citations by year
2026: 5 · 2025: 15 · 2024: 20 · 2023: 24 · 2022: 13 · 2021: 15 · 2020: 2
FWCI
4.24
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • National Research Foundation
  • National Research Foundation of Korea (2015R1A3A2028975)
Topics
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators
  • Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
  • Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
Keywords
covalent triazine frameworks, polymers of intrinsic microporosity, electronic piano, low-voltage actuation, bending displacement

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: CTF-based soft touch actuator for playing electronic piano. https://app.cochat.ai/papers/10.1038/s41467-020-19180-3
The paper
Mahato, M., Tabassian, R., Nguyen, V. H., Oh, S., Nam, S., Hwang, W.-J., & Oh, I.-K. (2020). CTF-based soft touch actuator for playing electronic piano. Nature Communications. https://doi.org/10.1038/s41467-020-19180-3

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.