The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Discovery of temperature-induced stability reversal in perovskites using high-throughput robotic learning
Open accessAbstract
Stability of perovskite-based photovoltaics remains a topic requiring further attention. Cation engineering influences perovskite stability, with the present-day understanding of the impact of cations based on accelerated ageing tests at higher-than-operating temperatures (e.g. 140°C). By coupling high-throughput experimentation with machine learning, we discover a weak correlation between high/low-temperature stability with a stability-reversal behavior. At high ageing temperatures, increasing organic cation (e.g. methylammonium) or decreasing inorganic cation (e.g. cesium) in multi-cation perovskites has detrimental impact on photo/thermal-stability; but below 100°C, the impact is reversed. The underlying mechanism is revealed by calculating the kinetic activation energy in perovskite decomposition. We further identify that incorporating at least 10 mol.% MA and up to 5 mol.% Cs/Rb to maximize the device stability at device-operating temperature (<100°C). We close by demonstrating the methylammonium-containing perovskite solar cells showing negligible efficiency loss compared to its initial efficiency after 1800 hours of working under illumination at 30°C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Unified Approach to Interpreting Model Predictions
Lundberg, S., & Lee, S.-I. (2017) · arXiv · doi:10.48550/arxiv.1705.07874 · Cited by 23,707
Reaction-rate theory: fifty years after Kramers
Hänggi, P., Talkner, P., & Borkovec, M. (1990) · Reviews of Modern Physics · doi:10.1103/revmodphys.62.251 · Cited by 6,154
How machine learning can help select capping layers to suppress perovskite degradation
Hartono, N. T. P., Thapa, J., Tiihonen, A., Oviedo, F., Batali, C., Yoo, J. J., Liu, Z., Li, R., Marrón, D. F., Bawendi, M. G., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17945-4 · Cited by 189
Self-citation
Research works printed but not linked: 34
- Stranks, S. D. & Snaith, H. J. Metal-halide perovskites for photovoltaic and light-emitting devices. Nat. Nanotechnol. 10, 391–402 (2015). · DOI · Paper page
- Correa-Baena, J. P. et al. Promises and challenges of perovskite solar cells. Science 358, 739–744 (2017). · DOI · Paper page
- Correa-Baena, J. P. et al. Homogenized halides and alkali cation segregation in alloyed organic-inorganic perovskites. Science 363, 627–631 (2019). · DOI · Paper page
- Eperon, G. E. et al. Perovskite-perovskite tandem photovoltaics with optimized band gaps. Science 354, 861–865 (2016). · DOI · Paper page
- Hou, Y. et al. Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon. Science 367, 1135–1140 (2020). · DOI · Paper page
- McMeekin, D. P. et al. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells. Science 351, 151–155 (2016). · DOI · Paper page
- Saliba, M. et al. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science 354, 206–209 (2016). · DOI · Paper page
- Turren-Cruz, S. H., Hagfeldt, A. & Saliba, M. Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture. Science 362, 449–453 (2018). · DOI · Paper page
- Abdi-Jalebi, M. et al. Maximizing and stabilizing luminescence from halide perovskites with potassium passivation. Nature 555, 497–501 (2018). · DOI · Paper page
- Niu, G., Li, W., Li, J., Liang, X. & Wang, L. Enhancement of thermal stability for perovskite solar cells through cesium doping. RSC Advances 7, 17473–17479 (2017). · DOI · Paper page
- Zhao, Y. et al. Perovskite seeding growth of formamidinium-lead-iodide-based perovskites for efficient and stable solar cells. Nat. Commun. 9, 1607 (2018). · DOI · Paper page
- Saliba, M. et al. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency. Energy Environ. Sci. 9, 1989–1994 (2016). · DOI · Paper page
- Kulbak, M. et al. Cesium enhances long-term stability of lead bromide perovskite-based solar cells. J. Phys. Chem. Lett. 7, 167–172 (2016). · DOI · Paper page
- Khenkin, M. V. et al. Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures. Nat. Energy 5, 35–49 (2020). · DOI · Paper page
- Leijtens, T. et al. Towards enabling stable lead halide perovskite solar cells; interplay between structural, environmental, and thermal stability. J. Mater. Chem. A 5, 11483–11500 (2017). · doi:10.1039/c7ta00434f
- Tan, W., Bowring, A. R., Meng, A. C., McGehee, M. D. & McIntyre, P. C. Thermal stability of mixed cation metal halide perovskites in air. ACS Appl. Mater. Interfaces 10, 5485–5491 (2018). · DOI · Paper page
- Juarez-Perez, E. J., Hawash, Z., Raga, S. R., Ono, L. K. & Qi, Y. Thermal degradation of CH3NH3PbI3 perovskite into NH3 and CH3I gases observed by coupled thermogravimetry–mass spectrometry analysis. Energy Environ. Sci. 9, 3406–3410 (2016). · DOI · Paper page
- Juarez-Perez, E. J. et al. Photodecomposition and thermal decomposition in methylammonium halide lead perovskites and inferred design principles to increase photovoltaic device stability. J. Mater. Chem. A 6, 9604–9612 (2018). · DOI · Paper page
- Jiang, Q. et al. Surface passivation of perovskite film for efficient solar cells. Nat. Photon. 13, 460–466 (2019). · DOI · Paper page
- Zhao, Y. et al. Double-side-passivated perovskite solar cells with ultra-low potential loss. Solar RRL 3, 1800296 (2019). · DOI
- Yang, W. S. et al. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells. Science 356, 1376–1379 (2017). · DOI · Paper page
- Jiang, Q. et al. Planar-structure perovskite solar cells with efficiency beyond 21. Adv. Mater. 29, 1703852 (2017). · DOI · Paper page
- Kim, M. et al. Methylammonium chloride induces intermediate phase stabilization for efficient perovskite solar cells. Joule 3, 2179–2192 (2019). · DOI · Paper page
- Xu, Z. et al. Phase diagram and stability of mixed-cation lead iodide perovskites: a theory and experiment combined study. Phys. Rev. Mater. 4, 095401 (2020). · DOI
- Zhao, J. et al. Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells. Sci. Adv. 3, eaao5616 (2017). · DOI · Paper page
- Saidaminov, M. I. et al. Multi-cation perovskites prevent carrier reflection from grain surfaces. Nat. Mater. 19, 412–418 (2020). · DOI · Paper page
- Smecca, E. et al. Stability of solution-processed MAPbI3 and FAPbI3 layers. Phys. Chem. Chem. Phys. 18, 13413–13422 (2016). · DOI · Paper page
- Kondepudi, D. Introduction to Modern Thermodynamics (John Wiley & Sons, Ltd, 2008).
- Schutt, K. et al. Overcoming zinc oxide interface instability with a methylammonium‐free perovskite for high‐performance solar cells. Adv. Funct. Mater. 29, 1900466 (2019). · doi:10.1002/adfm.201900466
- Tan, H. et al. Dipolar cations confer defect tolerance in wide-bandgap metal halide perovskites. Nat. Commun. 9, 3100 (2018). · DOI · Paper page
- Zhao, Y. et al. Quantification of light-enhanced ionic transport in lead iodide perovskite thin films and its solar cell applications. Light Sci. Appl. 6, e16243 (2016). · DOI · Paper page
- Saliba, M. Perovskite solar cells must come of age. Science 359, 388–389 (2018). · DOI
- Juan-Pablo, C.-B. et al. Promises and challenges of perovskite solar cells. Science 358, 739–744 (2017). · DOI · Paper page
- Pedregosa, F. et al. Scikit-learn: machine learning in Python. J. Mach. Learn. Res. 12, 2825–2830 (2011).
Cited by
Small data machine learning in materials science
Xu, P., Ji, X., Li, M., & Lu, W. (2023) · npj Computational Materials · doi:10.1038/s41524-023-01000-z · Cited by 866
Long-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Self-citationThe rise of self-driving labs in chemical and materials sciences
Abolhasani, M., & Kumacheva, E. (2023) · Nature Synthesis · doi:10.1038/s44160-022-00231-0 · Cited by 570
Chen, R., Wang, J., Liu, Z., Ren, F., Liu, S., Zhou, J., Wang, H., Meng, X., Zhang, Z., Guan, X., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01288-7 · Cited by 302
Self-assembled bilayer for perovskite solar cells with improved tolerance against thermal stresses
Dong, B., Wei, M., Li, Y., Yang, Y., Ma, W., Zhang, Y., Ran, Y., Cui, M., Su, Z., Fan, Q., et al. (2025) · Nature Energy · doi:10.1038/s41560-024-01689-2 · Cited by 261
Metadata
- Authors
- Zhao, Y., Zhang, J., Xu, Z., Sun, S., Langner, S., Hartono, N. T. P., Heumueller, T., Hou, Y., Elia, J., Li, N., Matt, G. J., Du, X., Meng, W., Osvet, A., Zhang, K., Stubhan, T., Feng, Y., Hauch, J., Sargent, E. H., Buonassisi, T., & Brabec, C. J.
- Venue
- Nature Communications
- Published
- 2021-04-13
- Volume
- 12
- Issue
- 1
- Pages
- 2191-2191
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W3153202491
- Cited by
- 180
- References
- 3
- FWCI
- 8.57
- Type
- journal article
- Language
- en
- Open access
- gold
- Licence
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Funders
- Alexander von Humboldt-Stiftung
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Discovery of temperature-induced stability reversal in perovskites using high-throughput robotic learning. https://app.cochat.ai/papers/10.1038/s41467-021-22472-x
- The paper
- Zhao, Y., Zhang, J., Xu, Z., Sun, S., Langner, S., Hartono, N. T. P., Heumueller, T., Hou, Y., Elia, J., Li, N., Matt, G. J., Du, X., Meng, W., Osvet, A., Zhang, K., Stubhan, T., Feng, Y., Hauch, J., Sargent, E. H., . . . Brabec, C. J. (2021). Discovery of temperature-induced stability reversal in perovskites using high-throughput robotic learning. Nature Communications. https://doi.org/10.1038/s41467-021-22472-x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.